JP300-623000-000 Hangcha Forklift Hydraulic Gear Pump

1 / 4
Parameter Specification
Reference part code JP300-623000-000 (identification only)
Product type External hydraulic gear pump, aftermarket replacement
Application Hangcha forklift lift and steering circuits
Matching basis Complete assembly code, forklift model, equipment details
Customisable items P/T port configuration, OEM specifications
Inspection 100% final inspection against approved drawing
MOQ 1 piece for stocked models
Lead time 3–5 business days for stocked models
Warranty One year
Incoterm EXW Hebei, China
Product Information

JP300-623000-000 / CBTZ-F20-AF13-1 Hangcha Forklift Hydraulic Gear Pump

This Hangcha forklift hydraulic gear pump listing covers two replacement codes, JP300-623000-000 and CBTZ-F20-AF13-1, that share one reference image. Only JP300-623000-000 has documented performance data.

For JP300-623000-000, the Hangcha service manual identifies pump TMG1H20F2H6-R283D: 20 cm³/rev (approx. 1.22 in³/rev) at a rated 2,000 rpm, giving approximately 40 L/min (10.6 US gpm) of theoretical flow. That flow sets lift speed and steering response on the truck. A pump with a different displacement can still bolt on and leave the mast lifting noticeably slower. Rated pressure is 20.6 MPa (approx. 206 bar / 2,990 psi), with a 22.6 MPa (approx. 226 bar / 3,280 psi) peak.

CBTZ-F20-AF13-1 appears in a third-party aftermarket catalogue under Hangcha with a splined shaft, and no other data is documented for it. Its displacement, pressure, speed, spline count, rotation, flange and ports must be confirmed from your old pump or a drawing. The two codes are not presented as interchangeable. The product photo is a shared reference image for both and is not evidence of a dimensional match.

Both are external gear pumps supplied as aftermarket replacements for Hangcha lift and steering circuits. We match each order to the complete assembly code, truck model and equipment details. P/T port configuration is available as a custom option.

JP300-623000-000 vs CBTZ-F20-AF13-1: Documented Data Side by Side

Each column lists only what its own source supports. Nothing documented for JP300-623000-000 is carried over to CBTZ-F20-AF13-1.

Parameter JP300-623000-000 CBTZ-F20-AF13-1
Data source Hangcha service manual Third-party aftermarket catalogue listing
Pump identified as TMG1H20F2H6-R283D Confirm from nameplate on old pump
Pump type External gear pump, aftermarket replacement External gear pump, aftermarket replacement
Displacement 20 cm³/rev (approx. 1.22 in³/rev) Confirm from old pump or drawing
Rated pressure 20.6 MPa (approx. 206 bar / 2,990 psi) Confirm from old pump or drawing
Peak pressure 22.6 MPa (approx. 226 bar / 3,280 psi) Confirm from old pump or drawing
Rated speed 2,000 rpm Confirm from old pump or drawing
Theoretical flow 40 L/min (approx. 10.6 US gpm) at 2,000 rpm Confirm from old pump or drawing
Drive shaft Verify against old pump Splined; spline count to confirm
Rotation, flange, ports Verify against old pump Confirm from old pump or drawing
Truck reference Some Hangcha CPDS13/15/16/18/20 configurations; CPD10–30JD1 catalogue reference only Hangcha; truck series not documented
Identification

Which Hangcha Forklift Hydraulic Gear Pump Fits Your Truck?

The truck model alone does not settle the part. The serial number and the assembly listing do.

Start from the serial number and the 5P1 assembly

Hangcha fits JP300-623000-000 to some CPDS13, CPDS15, CPDS16, CPDS18 and CPDS20 configurations, not to every truck in those series. Pump assemblies can change across production runs within a single model, so check the serial number against the 5P1 assembly listing in the service manual before ordering. If the manual for your serial range shows TMG1H20F2H6-R283D, the documented 20 cm³/rev data applies. If it shows a different pump, quote from that code.

Why CPD10–30JD1 is listed as a reference only

The Rui Chen aftermarket catalogue also lists JP300-623000-000 against the CPD10–30JD1 range. We treat that as a lead for identification, not a confirmed fitment, because the catalogue does not give the serial range or assembly breakdown behind it. On these trucks, the nameplate on the installed pump and a set of measurements decide the match. Third-party catalogue references belong to their holders and are cited here for identification only.

Reading CBTZ-F20-AF13-1 without assuming

In Chinese gear pump coding, a segment such as F20 often relates to displacement. Coding rules differ between makers, though, so we do not read the code as 20 cm³/rev or as an equivalent of the JP300 pump. The only documented facts are the Hangcha listing and the splined shaft. Everything else is taken from your old pump, its nameplate or a drawing before a price or configuration is confirmed.

Brand names and part numbers identify the pump you are replacing; fitment depends on the complete assembly code.

Have the old pump on the bench?Send a nameplate photo, the truck serial and the four measurements below, and we will confirm which configuration matches.

Send Pump Details

Measuring a Forklift Gear Pump Before You Order

Four checks catch most mismatches between a replacement gear pump and the truck it goes into.

  1. Shaft spline and coupler engagement

    On electric counterbalance trucks, the gear pump is usually driven by the pump motor through a splined coupler. Count the spline teeth and measure the major diameter and the length that sits inside the coupler. If engagement is too short, the load falls on fewer teeth and the spline typically wears or fretts early. If it is too long, the shaft can bottom out in the coupler and load the pump bearings axially.

  2. Mounting flange and pilot

    Measure the pilot diameter, the bolt-hole spacing and the bolt-hole size. A pilot that is a fraction of a millimetre oversize will not seat, and an undersize pilot lets the shaft run off-centre to the motor. Both conditions show up quickly as coupler wear and shaft seal leaks.

  3. Port placement and threads

    Note whether the inlet and outlet are on the side or the rear cover, and record the thread standard: metric, BSP, SAE O-ring boss or a flange pattern. The inlet port is normally larger than the outlet, and the existing hoses on the truck dictate the port position. Distributors stocking for several truck builds can order custom P/T port configurations so one pump body fits their hose routing.

  4. Rotation direction

    Check rotation looking at the shaft end. Most forklift gear pumps are single-direction, and running one in reverse swaps the suction and pressure sides. That usually blows the shaft seal within minutes. The rotation also tells you which port is suction, so record it together with the port positions.

Shaft Spline tooth count, major diameter, engaged length
Flange Pilot diameter, bolt pattern, bolt hole size
Ports Thread type and size, position, centre height
Rotation CW or CCW, viewed from shaft end

Wholesale Terms for Distributors and Parts Suppliers

All commercial terms are fixed in a written quotation before production, including unit pricing by quantity.

Production takes place at a manufacturing partner in Ningjin, established in August 2010 and about 9 km from the Xinji sales office.

Incoterm EXW Hebei, China · Handed over at the manufacturer's facility in Hebei
Pricing Unit price by quantity · Quantity breaks stated in the written quotation
Payment Confirmed in writing · Set out in the written quotation
Quote response Within 24 hours · Send model, quantity and destination port
Inspection 100% final inspection · Dimensional, leak and pressure/flow checks agreed in quotation

Custom P/T Ports and OEM Gear Pump Builds

Custom and OEM pumps are built to the drawing you approve, and quality checks are made against that drawing rather than a general catalogue specification.

P/T port configuration

Port position, thread type and size can be set to suit your hose routing or a distributor's stock range. Changes are shown on the drawing before sampling.

Design drafts and 3D renders

You receive drafts and 3D renders for approval before any sample is made. The approved drawing becomes the inspection reference for every later batch.

Dedicated tooling

OEM tooling is built to your approved drawing, and repeat batches run from the same tooling. Dimensions therefore stay consistent from one order to the next.

Tooling fee refund

Quantities from each order count toward a running total. Olive Branch Hydraulics refunds the full tooling fee once the agreed quantity is reached, and that threshold is fixed in writing at the start.

How a custom order runs

  1. Inquiry

    You send the part code, old pump measurements or drawing, quantity and destination port.

  2. Design

    We return design drafts and 3D renders for your approval.

  3. Sampling

    A sample is built to the approved drawing for fit and function checks on your truck.

  4. Production

    Batch production runs with in-process quality control, and the section order, ports and mounting are checked against the drawing.

  5. Inspection and handover

    Every pump passes final inspection before packing, and goods are released EXW Hebei to your forwarder.

Hangcha Gear Pump Replacement FAQ

Are JP300-623000-000 and CBTZ-F20-AF13-1 interchangeable?

No interchangeability is claimed. The two codes share a reference image in a third-party catalogue, but only JP300-623000-000 has documented specifications. CBTZ-F20-AF13-1 must be matched from your old pump or drawing.

What do you need to quote a replacement pump?

Send the original part code, a nameplate photo, the forklift model and serial number, the quantity and the destination port. For CBTZ-F20-AF13-1 or any unclear code, also include the spline count, flange dimensions, port details and rotation.

How are order quantity and pricing set?

The written quotation states unit pricing by quantity for the confirmed configuration. Custom and OEM quantity terms depend on the configuration and are agreed before tooling begins.

When will the order ship?

The delivery schedule is confirmed in the written quotation. It depends on the confirmed configuration and the order quantity, and each stage is fixed in writing before production starts.

Can I get a sample before a bulk order?

Yes, for custom builds a sample is made after you approve the drawing and renders. Sample terms are included in the quotation.

How is the pump shipped?

Goods are supplied EXW Hebei, China, and your forwarder collects them from the manufacturer's facility. Ports are plugged before packing, and packing details are given with the quotation.

Get a Matched Quote for Your Hangcha Pump

Send the nameplate photo, the truck model and serial, the quantity and the destination port. Within 24 hours you will receive either a confirmed configuration with pricing by quantity or a short list of measurements still needed.

Request a QuoteEmail Pump Photos

  • Nameplate photo or original part code
  • Forklift model and serial number
  • Spline, flange, port and rotation details for unclear codes

JP300-623000-000 Hangcha Forklift Hydraulic Gear Pump: Replacement Unit Matched by Assembly Code

This JP300-623000-000 Hangcha forklift hydraulic gear pump is an aftermarket replacement matched to the original part code, the forklift model and the complete assembly code. It is not a Hangcha original part.

It is the wrong choice if your contract or fleet policy calls for genuine Hangcha-branded parts with OEM documentation. It is also the wrong choice if you want a pump picked from a photo alone, without confirming the complete assembly code. Two pumps can share a part number family and still differ in flange, shaft or port layout, so a pump picked that way can arrive and not fit.

It suits distributors, parts suppliers and repair workshops that need a replacement gear pump for lift and steering supply on Hangcha trucks. The mounting flange, shaft, rotation and P/T port positions must line up with the pump coming off the truck. Matching starts from the JP300-623000-000 code and your truck details. The configuration is checked against a drawing before production, so fitment is confirmed on paper first and not discovered at installation.

Customising the JP300-623000-000 Hangcha Forklift Gear Pump: Ports, Interfaces and Tooling

The short answer

Distributors often need port layouts that differ from the standard unit. We handle these changes through approved drawings before any sample is cut.

P/T Port Configurations and Drawing Approval

The most common request from distributors is a changed P/T port position or thread to suit the hose routing on a particular truck series. We build OEM and aftermarket versions to the customer's specification. Before sampling, we send design drafts and 3D renders, so port positions, flange orientation and shaft details are signed off on screen. A port clash costs far less to fix at the drawing stage than after a batch has been machined.

Tooling, MOQ and Lead Time Impact

Some changes need dedicated tooling. In those cases we first review your original pump sample or approved drawing to confirm the mounting interface, the drive and the port layout. Tooling changes both cost and timing. MOQ and lead time for custom units are confirmed by series and configuration, not taken from the stocked-model terms. The tooling fee is refunded in full once cumulative purchases of that model reach the agreed quantity. Separate orders count towards that total, so the refund does not depend on placing one large order.

Approved drawings and 3D renders come before sampling. The tooling fee is refunded once the agreed cumulative quantity is reached.

JP300-623000-000 Replacement Data to Confirm Before Ordering

Matching a forklift gear pump replacement depends on five checks. A dimensioned drawing settles most of them at once.

Hangcha brand names and model numbers are used for replacement identification only. Compatibility depends on the complete assembly code.

Original part code and assembly code

Send JP300-623000-000 together with the full code stamped on the nameplate or housing. Suffixes in the assembly code can change the port or shaft details, so the short code alone is not enough to confirm fit.

Forklift model and equipment details

Give the truck model, the serial range if known, and the circuit the pump feeds. This identifies which assembly variant was originally fitted when the nameplate is worn or missing.

Mounting flange

Confirm the flange type, pilot diameter and bolt pattern. A flange mismatch cannot be corrected by adapters on most truck installations, so it is checked first.

Shaft type and rotation

Specify the spline or keyed shaft, its dimensions, and the rotation viewed from the shaft end. A reversed rotation unit will not prime, even if it bolts on correctly.

P/T port positions

Note the port locations, thread standard and orientation relative to the flange. A dimensioned drawing fixes the flange, shaft and port geometry in one document and is the most reliable basis for matching.

Where This Hangcha Forklift Hydraulic Pump Is Used

Every application below depends on interface fit and a short changeover time.

Forklift hydraulic systems

Supplies oil to the lift and steering circuits, where flange and port positions must match the original pump.

Warehouse material handling

A truck that is down stops the dock, so a pump that bolts straight on matters more than catalogue extras.

Forklift repair workshops

Mechanics need a unit that fits on the first attempt without re-plumbing hoses.

Aftermarket parts distributors

Stock is held against a confirmed assembly code, which reduces returns from mismatched variants.

Logistics center fleets

Maintenance teams replacing pumps across several trucks need the same configuration in every batch.

From Sample Review to Batch Dispatch: How a Custom Forklift Gear Pump Order Runs

Every check is made against the drawing you approved, not against a general catalogue specification.

Production runs at our manufacturing partner in Ningjin, established in August 2010, about 9 km from the Xinji sales office. The quotation sets out the scope of dimensional checks, leak inspection, pressure and flow testing where applicable, and the shipping documents.

  1. Inquiry and drawings

    You send the part code, truck details and any port changes. We return design drafts and 3D renders for approval.

  2. Sample or drawing review and tooling

    We check your original pump or approved drawing for the interface, drive and ports before any tooling is made.

  3. Sampling

    A sample is built to the approved drawing for fit confirmation on your truck or test bench.

  4. Production and configuration check

    In-process quality control runs during machining and assembly. Section order, port positions and mounting interfaces are verified against the approved drawing. Any deviation is resolved before the batch ships.

  5. 100% final inspection

    Every pump is inspected before packaging, not a sampled share of the lot.

  6. Packaging and dispatch

    Pumps are packed for export and handed over under the agreed terms.

MOQ, Lead Time and Tiered Written Quotations for Forklift Pump Distributors

Stocked and custom units follow different terms. Both are fixed in writing before you commit.

Stocked models start at 1 piece and ship within 3–5 business days, which covers urgent workshop replacements and small top-up orders. Custom and OEM orders work differently. MOQ and lead time depend on the confirmed configuration and the order quantity, and both are stated in the quotation before any tooling begins.

To get a price, send the model, quantity and destination port. We reply within 24 hours. The written quotation lists unit prices by quantity tier, the tooling fee, the refund quantity, the warranty terms and the EXW terms, so you can calculate your resale margin before ordering. Goods are supplied EXW Hebei, China, and handed over at the manufacturer's facility. Payment terms are confirmed in the same written quotation.

Stocked MOQ 1 piece
Stocked dispatch 3–5 business days
Quote reply Within 24 hours
Incoterm EXW Hebei, China

Hangcha Forklift Gear Pump Questions from Parts Suppliers and Workshops

Is this a genuine Hangcha part?

No. It is an aftermarket replacement. The Hangcha name and the JP300-623000-000 number are used for identification only, and compatibility depends on the complete assembly code.

Can you match the pump if I only have the old unit and no drawing?

Yes, in most cases. Send the original part code, the forklift model and equipment details, or ship the original pump as a sample, and we confirm the flange, shaft and ports from it before quoting.

What warranty applies?

Olive Branch Hydraulics gives a one-year warranty. The coverage terms are written into the quotation, so they are agreed before the order is placed.

Can I combine this pump with other gear pump models in one order?

Yes. Each model is quoted on its own line with its own quantity tiers. Tooling refunds are tracked separately for each model.

Which inspection documents come with the shipment?

The documents are agreed in the quotation. Any third-party document references belong to their holders and are not our own certifications.

Request a Quote for JP300-623000-000 Hangcha Forklift Hydraulic Gear Pumps

Send the model, quantity and destination port, together with the original part code or forklift model details. Photos of the old pump or a drawing let us confirm the interface and port layout before pricing. You receive a written tiered quotation within 24 hours. Email [email protected] or call +86 15075996564.

Send part code for a quote

Part code JP300-623000-000 and full assembly code, Forklift model and quantity, Destination port

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.