A45E7-10202 Tandem Hydraulic Gear Pump

Parameter Specification
Part number A45E7-10202
Pump type Tandem gear pump
Catalog notation 36R/4R
Listed application Selected Viper 5–10T configurations
MOQ (stocked models) 1 piece
Lead time (stocked models) 3–5 business days
Inspection 100% final inspection before packaging
Warranty One year, terms per written quotation
Incoterm EXW Hebei, China
Customization P/T port configurations, OEM builds to approved drawing
Product Information

A45E7-10202 Tandem Hydraulic Gear Pump for Viper 5–10T Configurations

The A45E7-10202 tandem hydraulic gear pump is a two-section replacement pump, catalogued as 36R/4R and listed for selected Viper 5–10T configurations. It is supplied against the original part number and an approved drawing, not a brand cross-reference chart.

A typical cross-reference sends the same pump body to every machine that shares a brand or series name. On a tandem unit, that approach can go wrong in three places: section order, port positions and the mounting interface. If any of them differs from the pump being replaced, the pump arrives in good condition and still cannot be fitted.

Each A45E7-10202 is matched from the original product code, the machine model and the equipment details. Before shipment, the build is checked section by section against a drawing you have approved. Brand names and model numbers appear on this page only to identify the replacement. Interchangeability is confirmed by the complete assembly code.

What to Confirm Before Ordering an A45E7-10202 Tandem Hydraulic Gear Pump

Three pieces of information settle most interchangeability questions before a quote is issued.

The data we match against

Start with the original product code, A45E7-10202, exactly as it appears on the old pump or in the parts book. Add the machine model, the serial range where available, and any equipment details that affect the hydraulic circuit, such as mast type or attachments. A clear photo of the nameplate and a second photo of the port side let us read stamped codes and check port layout. The photos also catch digits that are often lost when a part number is retyped.

Why the full assembly code decides fit

Two pumps can share a brand reference and still differ in shaft, flange, rotation or port orientation. For that reason we match each replacement against the complete assembly code and the machine data, item by item, and we do not rely on the series name alone. If the code on your pump has a suffix or revision letter that differs from A45E7-10202, send it as well. That detail can change which build is correct.

A45E7-10202 Tandem Gear Pump Specifications and 36R/4R Catalog Notation

The listed data identifies the pump. Dimensional detail comes from the approved drawing.

We publish no pressure, flow or displacement ratings here. Those values are confirmed for your build and stated in the drawing and quotation documents.

Part number

A45E7-10202

Pump type

Tandem gear pump

Catalog notation

36R/4R

Listed application

Selected Viper 5–10T configurations

Dimensions, port sizes and mounting

As per approved drawing

Section order and port positions

Verified against approved drawing before shipment

Where the A45E7-10202 Fits: Viper 5–10T Forklifts, Tractors and Construction Machinery

Only the Viper 5–10T configurations are listed. Fit on any other machine is confirmed case by case.

Selected Viper 5–10T configurations

This is the application listed for A45E7-10202. Fit still depends on the specific configuration, so the machine model and equipment details are checked before the order is confirmed.

Material handling equipment

Forklifts and similar lift trucks often use tandem gear pumps to supply lift and steering from one drive. Fit outside the listed Viper range is confirmed by matching the original part number and equipment data.

Agricultural tractors

Tractor hydraulic circuits use a wide variety of tandem gear pumps. We match a tractor application only after checking the original code and drawing. A shared catalog notation alone is not enough.

Construction machinery

Compact construction equipment can use similar two-section layouts but different mounting flanges and shafts. Each application is verified against the original assembly before it is quoted.

Hydraulic maintenance and aftermarket distribution

Workshops and parts distributors can quote A45E7-10202 as a replacement line, with interchangeability confirmed by the complete assembly code for each end customer.

How Tandem Section Order, Port Positions and Mounting Are Checked Against the Approved Drawing

  1. Why tandem replacements fail at installation

    Tandem replacements that fail at installation usually fail for mechanical reasons. The front and rear sections are reversed, so the larger section ends up on the wrong circuit. Pressure and tank ports can be rotated relative to the original, which forces the hoses to be rerouted. The flange, pilot or shaft may not mate with the drive. None of these faults appears on a part-number match alone.

  2. Drawing-verified configuration

    For this pump, the section order, port positions and mounting interface are checked against the drawing you approved. They are not checked against a general catalogue specification. Any deviation is corrected before the batch ships, not after it arrives at your warehouse. The approved drawing also becomes the reference for repeat orders of the same build.

  3. Final inspection and warranty

    Every unit receives a final inspection before it is packed. The quotation agrees the inspection scope, which can include dimensional checks, leak inspection and pressure or flow testing where applicable, and it lists the documents supplied with the shipment. The pump carries a one-year warranty, and the exact coverage terms are set out in the written quotation.

    Fit is decided at the bench against the drawing, before the pump is packed.

Standard vs Custom A45E7-10202 Builds: P/T Ports and OEM Tooling

The standard replacement follows the original part. Custom builds start from a drawing that you approve.

Standard replacement build

This build is matched to the original A45E7-10202 assembly code and machine data. It suits like-for-like repairs where the existing hoses and mounting stay unchanged.

Custom P/T port configurations

Distributors can specify pressure and tank port positions to suit their regional fleet or their stock policy. Changing the port layout produces a new build, so it is drawn and approved separately from the standard part.

Drafts and 3D renders before sampling

Design drafts and 3D renders are sent for your approval before any sample is made. Layout or interface changes are made at this drawing stage, where they cost less than changes to a finished sample.

Dedicated OEM tooling

OEM builds are produced on tooling made to your approved drawing. Later batches use the same tooling, so dimensions stay consistent from one order to the next.

Cumulative tooling fee refund

Quantities from each order are added to a running total. Once the agreed quantity is reached, the full tooling fee is refunded. The refund threshold is fixed in writing before tooling begins.

MOQ, Lead Time and EXW Delivery Terms for A45E7-10202 Orders

The written quotation fixes all commercial terms before production starts.

Stocked models

The MOQ is 1 piece, and stocked models ship within 3–5 business days.

Custom and OEM orders

MOQ and lead time depend on the confirmed configuration and order quantity. Both are stated in the quotation and fixed before tooling begins.

Delivery terms

Goods are supplied EXW Hebei, China, and handed over at the manufacturer's facility.

Payment

Payment terms are confirmed in the written quotation.

What the quotation states

The quotation lists unit pricing by quantity tier, the tooling fee, the refund quantity, the warranty terms and the EXW terms.

Request an A45E7-10202 Tandem Gear Pump Quote

Send the part number or original product code, the quantity you need, your destination port, and the machine model and equipment details. For a custom build, attach your drawing or your P/T port requirements. You will receive a matched quotation within 24 hours.

Send Part Number for a Quote

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.