Gear Pump Testing: Pressure, Flow and Leak Checks Before Shipment
Gear pump testing under load shows whether a pump delivers rated flow, holds rated pressure and stays leak-fre…
| Catalogue family pattern | Displacement (ml/rev) | Selectable regulated flow (L/min) | Rated pressure (MPa) | Catalogue maximum pressure (MPa) | Relief adjustment range (MPa) | Rated speed (rpm) | Working speed range (rpm) |
|---|---|---|---|---|---|---|---|
| HLCB-D00/06 | 6 | 4 / 6 / 8 | 10 | 12.5 | 5–12.5 | 2000 | 800–3000 |
| HLCB-D00/10 | 10 | 8 / 10 / 12 | 10 | 12.5 | 5–12.5 | 2000 | 800–3000 |
| HLCB-D00/16 | 16 | 12 / 14 / 16 | 10 | 12.5 | 5–12.5 | 2000 | 800–3000 |
| HLCB-D00/20 | 20 | 16 / 18 / 20 / 25 | 10 | 12.5 | 5–12.5 | 2000 | 800–3000 |
The 00 field is a catalogue placeholder for the selected regulated-flow value. Regulated flow requires sufficient pump delivery and an appropriate operating point; it is not guaranteed below the regulating threshold or at every pressure/speed combination.
| Selection item | Specification |
|---|---|
| Construction | External gear pump with integrated constant-flow and relief-valve assembly |
| Pictured mounting | Rectangular four-hole front flange; cover finish and valve-cover arrangement vary between reference examples |
| Shaft options | Straight keyed shaft and rectangular spline reference details; confirm full dimensions and coupling before ordering |
| Rotation | L: left-hand / counterclockwise; right-hand option according to full catalogue code. Confirm viewing direction. |
| Ports | Selected outline sheet shows M18 × 1.5 rear/end and side-port arrangements. Verify actual cover, inlet/outlet function and plumbing. |
| OEM / material number | No universal equipment part number verified. Quote against nameplate, full flow/displacement code and approved drawing. |
| Equipment applications | Hydraulic steering systems for agricultural and other mobile machinery; exact machine fitment requires dimensional and circuit verification. |
Olive Branch Hydraulics is a Chinese hydraulic component manufacturer supporting OEM/ODM production, custom tooling and sample-based development. The HLCB-D family combines an external gear pump with a constant-flow control and relief-valve assembly. It is intended for hydraulic steering applications where the steering circuit requires a selected regulated flow as drive speed changes.
This product groups the selected rectangular four-hole flange configuration, shaft choices and flow/displacement designations on one page. The approved reference photographs include a marked HLCB-D06/06 example, a silver-finish cover example and a comparison of valve-cover arrangements. These are configuration references rather than three angles of one identical assembly. The gallery also includes the original installation and shaft-detail sheet.
The selected catalogue lists 6, 10, 16 and 20 ml per revolution. Its regulated-flow choices produce the thirteen base designations below. The first numeric field identifies the selected constant-flow setting in litres per minute; the field after the slash identifies gear displacement in millilitres per revolution. For example, HLCB-D06/06 identifies a 6 L/min flow choice with a 6 ml/rev gear section. The two numbers are different quantities even when their numeric values match.
| Complete base flow/displacement designation | Regulated flow setting (L/min) | Gear displacement (ml/rev) |
|---|---|---|
| HLCB-D04/06 | 4 | 6 |
| HLCB-D06/06 | 6 | 6 |
| HLCB-D08/06 | 8 | 6 |
| HLCB-D08/10 | 8 | 10 |
| HLCB-D10/10 | 10 | 10 |
| HLCB-D12/10 | 12 | 10 |
| HLCB-D12/16 | 12 | 16 |
| HLCB-D14/16 | 14 | 16 |
| HLCB-D16/16 | 16 | 16 |
| HLCB-D16/20 | 16 | 20 |
| HLCB-D18/20 | 18 | 20 |
| HLCB-D20/20 | 20 | 20 |
| HLCB-D25/20 | 25 | 20 |
These designations follow the selected catalogue options. Confirm the complete suffix, rotation, cover, shaft, port arrangement and valve calibration for the actual order. Other HLCB catalogues may use additional displacement ranges or different code conventions; those configurations require a separate technical review before being treated as the same assembly.
| Base designation | Search formatting variants |
|---|---|
| HLCB-D04/06 | HLCBD04/06 / HLCB D04/06 / HLCB/D04/06 |
| HLCB-D06/06 | HLCBD06/06 / HLCB D06/06 / HLCB/D06/06 |
| HLCB-D08/06 | HLCBD08/06 / HLCB D08/06 / HLCB/D08/06 |
| HLCB-D08/10 | HLCBD08/10 / HLCB D08/10 / HLCB/D08/10 |
| HLCB-D10/10 | HLCBD10/10 / HLCB D10/10 / HLCB/D10/10 |
| HLCB-D12/10 | HLCBD12/10 / HLCB D12/10 / HLCB/D12/10 |
| HLCB-D12/16 | HLCBD12/16 / HLCB D12/16 / HLCB/D12/16 |
| HLCB-D14/16 | HLCBD14/16 / HLCB D14/16 / HLCB/D14/16 |
| HLCB-D16/16 | HLCBD16/16 / HLCB D16/16 / HLCB/D16/16 |
| HLCB-D16/20 | HLCBD16/20 / HLCB D16/20 / HLCB/D16/20 |
| HLCB-D18/20 | HLCBD18/20 / HLCB D18/20 / HLCB/D18/20 |
| HLCB-D20/20 | HLCBD20/20 / HLCB D20/20 / HLCB/D20/20 |
| HLCB-D25/20 | HLCBD25/20 / HLCB D25/20 / HLCB/D25/20 |
HLCB-D00/06, HLCB-D00/10, HLCB-D00/16 and HLCB-D00/20 are family patterns with an unresolved flow field. HLCB/D00/06 is another formatting style used in the referenced catalogue. The 00 placeholder is not a zero-flow production specification. Spacing and punctuation variants help locate enquiries but do not establish compatibility between different manufacturers.
The technical sheet provides a straight-keyed shaft reference and a four-tooth rectangular spline reference. Keep different shaft options within this family while identifying each configuration clearly. Confirm shaft diameter, key or spline dimensions, projection and coupling engagement. The photographs do not establish that every flow/displacement combination is available with every shaft shown.
The installation sheet shows four 9 mm mounting holes on a rectangular pattern, with 70 and 100 mm centre distances, and a 38 mm locating-pilot reference. Its straight-keyed shaft detail uses an 18 mm diameter reference. These figures apply to the illustrated configuration only. Obtain an approved drawing for the chosen cover and shaft before machining or installation.
| Catalogue displacement pattern | Reference L1 (mm) | Reference L (mm) |
|---|---|---|
| HLCB/D00/06 | 45 | 85 |
| HLCB/D00/10 | 48 | 88 |
| HLCB/D00/16 | 53 | 93 |
| HLCB/D00/20 | 56 | 96 |
L1 and L follow the source sheet notation. Valve-cover geometry, port position and total installation envelope must be confirmed separately for the ordered assembly. The comparison photograph shows differing cover arrangements; visible plug locations alone do not identify the hydraulic circuit or valve setting.
The selected catalogue gives 10 MPa rated pressure, 12.5 MPa maximum pressure, a relief adjustment range of 5–12.5 MPa, 2000 rpm rated speed and an 800–3000 rpm working range. A marking on an individual reference unit is not a universal continuous-pressure rating for the family. Specify the required relief calibration and duty cycle when requesting a quotation.
Constant-flow control works within its regulating conditions. At low drive speed, available pump delivery can be insufficient for the selected flow setting. Check the steering demand, minimum engine speed, pressure, fluid temperature, bypass circuit and heat load with the application review. The relief valve must be calibrated to the machine requirement rather than adjusted from a generic catalogue figure.
For agricultural power steering and other mobile hydraulic systems, supply the existing pump nameplate, machine information, shaft measurements, flange dimensions and port layout. A base family code alone does not prove compatibility with a particular tractor or harvester. Any verified equipment material number is recorded against the confirmed drawing; no unverified universal OEM number is assigned.
For manufacturing or an identical-interface request, send a dimensioned drawing or physical sample, the required regulated flow, displacement, relief setting, rotation and quantity. Custom development, sample inspection, production testing, packaging and delivery terms are agreed against the approved technical specification. Search terms: HLCB-D steering gear pump, HLCB constant-flow relief pump, HLCB-D06/06, agricultural power steering pump, tractor steering hydraulic pump, keyed shaft steering pump, rectangular spline gear pump, OEM ODM hydraulic pump manufacturer.
These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.
| Market / language | Product search phrases |
|---|---|
| English — international buyers | HLCB-D hydraulic gear pump; HLCB-D gear oil pump |
| Russia / Kazakhstan — Russian | HLCB-D шестеренный насос; HLCB-D гидравлический насос |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica de engranajes HLCB-D; bomba HLCB-D |
| Egypt / Iraq / Arabic-speaking markets | مضخة تروس هيدروليكية HLCB-D |
| Türkiye — Turkish | HLCB-D hidrolik dişli pompa; HLCB-D dişli pompa |
| Brazil — Portuguese | bomba hidráulica de engrenagens HLCB-D |
| Vietnam — Vietnamese | bơm bánh răng thủy lực HLCB-D |
| Indonesia — Indonesian | pompa roda gigi hidrolik HLCB-D |
| French-speaking markets | pompe hydraulique à engrenages HLCB-D |
Search family reference: HLCB-D. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.
Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.
Gear pump testing under load shows whether a pump delivers rated flow, holds rated pressure and stays leak-fre…
Learn how hydraulic directional control valves work. Explore spool operation, actuation methods, and real-worl…
Vane pump vs gear pump: Compare efficiency, noise, cost & applications to find the best hydraulic pump for you…
Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.