RE223233 Tandem Hydraulic Gear Pump For John Deere Tractors

1 / 4
Parameter Specification
Order reference RE223233 (RE 223233, RE-223233 variants)
Pump type Tandem external gear pump, two sections
Body Aluminium gear sections, black end covers
Drive External drive gear at mounting end
Displacement / pressure / rotation Confirmed from nameplate or approved sample
Origin / Incoterm Hebei, China; EXW
Customization Sample matching, tooling, private-label packaging
MOQ Confirmed with quotation
Lead time Confirmed with quotation
Product Information

RE223233 Tandem Hydraulic Gear Pump for John Deere Tractors

Our RE223233 tandem hydraulic gear pump fits a John Deere tractor only when your machine serial, drive gear, mounting flange and port layout match the RE223233 configuration. The catalogue model list is where matching starts. It is not a fit guarantee.

The basis for this is that RE223233 appears across a long list of John Deere 5-series and 5B, 5D and 5E tractors, and builds can vary with serial range and hydraulic options. Olive Branch Hydraulics manufactures this two-section external gear pump in Hebei, China. Our sales office is in Xinji and production is in Ningjin, about 9 km apart. RE223233 and John Deere are referenced only for identification. This pump is not a genuine John Deere part.

The pictured build has two aluminium gear sections, black end covers, an external drive gear at the mounting end, a large curved suction manifold joining both sections and two side outlet openings. Displacement, pressure, speed and rotation must be confirmed for the supplied configuration. These values are confirmed from your nameplate, sample or approved drawing before quotation.

  • Order reference — RE223233. RE 223233 and RE-223233 are punctuation variants of the same reference.
  • Supply basis — We make the pump in China. Fitment and specifications are matched to your sample or nameplate.

Send Serial or Nameplate Photo

What Is the RE223233 Tandem Hydraulic Gear Pump?

This is a two-section tandem hydraulic gear pump catalogued under RE223233 for John Deere agricultural tractor hydraulic systems. Both sections are driven through one external drive gear at the mounting end and draw oil through a shared suction manifold. Each section then delivers oil through its own outlet. We build to the RE223233 family shown in our photos and confirm each order against your machine serial and sample.

Key Features of the RE223233 Dual Gear Pump

All features listed below are visible on the pictured RE223233 build. Values that cannot be read from photos are confirmed by sample.

  • Two gear sections in one assembly

    The two aluminium gear sections are bolted in tandem and run from a single drive input. Each section feeds its own side outlet, which gives your machine two separate flows from one mounting point.

  • External drive gear at the mounting end

    The pump is driven by a gear, not a splined shaft. That puts it in a different drive family from splined-shaft pumps. Tooth count, gear diameter and backlash fit are matched to your removed pump or sample. We do not take them from catalogue images.

  • Shared curved suction manifold

    One large curved inlet manifold joins both sections. This shortens the suction path on the tractor side. Its hose or flange connection still has to match your machine's inlet line.

  • Sample-based duplication

    If your unit differs from the pictured build, we can reproduce it from your sample. This can cover the drive gear, flange or port positions. Tooling is quoted only when an interface change requires it.

RE223233 Technical Specifications and Order References

Only RE223233 defines this pictured pump family. The other codes below are spellings or external catalogue references that also need configuration matching.

Reference or Parameter Value or Status How to Use It
RE223233 Equipment pump reference Primary order reference for this pump family
RE 223233 Punctuation variation of RE223233 Not a new material number
RE-223233 Punctuation variation of RE223233 Not a new material number
WN-RE223233 PartsExpress supplier catalogue cross-reference to RE223233 Not our SKU and not an OEM number
JD RE223233 Magister catalogue style with JD prefix Not another OEM number
Displacement, pressure, speed, rotation Confirmed from nameplate, sample or approved drawing Confirm for the supplied configuration before quoting
Drive gear, flange, port threads Matched to your sample Not inferred from photos

Material and Construction

Housing and Covers

The two gear sections have aluminium bodies, and both ends are closed with black end covers. The sections are stacked in tandem behind a single mounting face that carries the external drive gear. External gear pumps of this type typically pair hardened steel gears with bearing bushings inside aluminium bodies. The exact materials for your build are confirmed against the approved sample.

Inlet and Outlet Layout

A large curved suction manifold links the inlets of both sections. Two outlet openings sit on the side faces. Before production, we check port positions, outlet orientation and manifold shape against your pump. Thread type and size are confirmed from the sample, because photos cannot show them reliably.

How a Tandem Gear Pump Works

Each section contains a pair of meshing external gears. As the teeth separate on the inlet side, oil from the shared manifold fills the tooth spaces. The oil is carried around the housing wall and pushed out where the teeth mesh again at the outlet. Because both sections turn on the same drive train, output from each section rises with drive speed and with that section's displacement.

In tractor hydraulic systems, the two outlets typically supply separate circuits. Matching rotation direction and the displacement of each section to the original is therefore as important as matching the flange. A pump with the wrong rotation or section sizes will not deliver the expected flow, even if it bolts on correctly.

Quality Control Process

Inspection is carried out against the approved sample, not against a generic pump template.

  1. Reference and sample confirmation

    We record the RE223233 reference, machine serial, drive gear, flange, ports and rotation before release. This record becomes the inspection standard for the order.

  2. Incoming material check

    We check castings, gear blanks and seals on arrival at Ningjin before machining begins.

  3. Machining and interface checks

    We measure gear and housing bores, mounting face and port positions against the sample during production.

  4. Pre-shipment inspection

    The required leakage, rotation, drive gear and visual checks are agreed against the approved sample. Production and inspection videos are available on request.

John Deere Tractor Application Reference

The models below come from John Deere's general reference list for RE223233. Your exact serial and configuration must still match before ordering.

Inclusion in this list does not confirm fit for every unit of a model.

5B, 5D and 5E models

5B-700, 5B-704, 5B-750, 5B-754, 5D-5205, 5E-5210, 5E-5303, 5E-5310, 5E-5403, 5E-5405

500 and 600 numbered models

550, 554, 650, 654

5D models

5038D, 5039D, 5040D, 5042D, 5045D, 5047D, 5050D, 5055D

5E models

5045E, 5050E, 5055E, 5060E, 5060EN, 5065E, 5067E, 5070E, 5075E, 5075EF, 5080E, 5080EN

5100 to 5600 numbered models

5103, 5103S, 5104, 5105, 5203, 5203S, 5204, 5303, 5305, 5403, 5410, 5503, 5610

Installation Guide

  1. Verify the match

    Compare the new pump with the removed unit side by side. Check the drive gear, flange, port positions and the rotation arrow.

  2. Clean the interfaces

    Clean the mounting face and line ends. Cap open ports until connection, because contamination at fitting is a common cause of early gear pump wear.

  3. Mount and torque

    Fit new seals and torque the fasteners to the John Deere service manual values for your machine.

  4. Fill and bleed

    Fill the inlet side with clean hydraulic oil. Start at low idle and bleed any air.

  5. Run check

    Run at low idle and check both outlets and the suction manifold for leaks and abnormal noise before loading the system.

Maintenance and Service Life

Service life depends mostly on oil cleanliness, inlet condition and pressure duty.

Filter and oil intervals

Follow the tractor manual's filter and oil change intervals.

Inlet sealing

Check the suction manifold connections. Air ingress can cause aeration, noise and unstable flow.

Duty match

Running above the confirmed pressure duty shortens bushing and gear life.

Early warning signs

Rising noise, heat or slower hydraulics usually indicate wear or contamination.

How to Choose the Right RE223233 Gear Pump

  1. Start from the serial

    Send the tractor model and serial number. The application list alone cannot confirm fit.

  2. Read the nameplate

    A photo of the old pump's nameplate or casting marks helps confirm section sizes and rotation.

  3. Check the drive type

    Confirm that your pump has an external drive gear. Splined-shaft pumps belong to a different family.

  4. Keep references separate

    RE197623 and RE68886 are different catalogue pump references, not aliases of RE223233. Quote each one separately.

  5. Confirm by sample if unsure

    If references conflict, your sample decides the build.

OEM, ODM and Private Label Options

You can order the RE223233 build as pictured or under your own brand and packaging.

  • Drive gear and flange

    We reproduce these from your sample. Tooling is quoted if new parts are needed.

  • Port positions and threads

    We match ports to your sample or drawing.

  • Private-label packaging

    Your logo, carton print, labels and barcodes can be applied.

  • Nameplate and marking

    Your part number and brand can be marked on the pump, without John Deere branding.

How custom orders work

  1. Requirement

    You send the reference, serial, sample or drawing, branding and quantity.

  2. Sample matching

    We confirm dimensions and interfaces and quote any tooling.

  3. Sample approval

    You test and approve the sample, which becomes the production standard.

  4. Production and delivery

    We produce the order and inspect it against the approved sample before EXW handover.

Packaging and Shipping

Individual protection

Ports are capped and each pump is boxed separately.

Branded or neutral cartons

You can choose neutral cartons or your own private-label print.

Carton data

Carton size, weight and units per carton are given in the quotation.

Incoterms

We quote EXW Hebei, China as standard. Other terms are available on request.

MOQ and Lead Time

Commercial terms depend on configuration, branding and tooling. All of them are confirmed in the quotation.

MOQ Stated per quotation · Tiered pricing by quantity is available for distributors
Lead time Stated per quotation · Starts after sample approval
Samples Sample matching available · Built from your pump or approved drawing
Incoterms EXW Hebei, China · Other terms on request
Payment Stated per quotation · Agreed before production

Warranty and After-sales Support

Warranty terms

Warranty terms are written into the quotation for each order.

Claim review

Send photos, the pump label and installation details for assessment.

Batch reference

Each order is tied to its approved sample record.

Technical queries

We answer fitment and interface questions before and after shipment.

FAQ

Is this a genuine John Deere RE223233 pump?
No. We manufacture it in China and use the reference RE223233 only for identification. Fit is confirmed by configuration matching.
Will it fit my 5055E?
Possibly. The 5055E is on the reference list, but you need to send the serial and a photo of the old pump so we can confirm the drive gear, flange, ports and rotation.
Is WN-RE223233 a different pump?
WN-RE223233 is a PartsExpress catalogue cross-reference to RE223233. It is not our SKU or an OEM number; confirm the actual supplied configuration before ordering.
Can you supply displacement and pressure figures?
Yes, after we check your nameplate or sample. The quoted specifications are tied to the approved configuration.
What are common inquiry terms for RE223233 in other languages?
EN: RE223233 tandem hydraulic gear pump; ES: bomba hidráulica de engranajes doble RE223233; PT: bomba hidráulica de engrenagem dupla RE223233; RU: тандемный шестеренный гидронасос RE223233; AR: مضخة تروس هيدروليكية مزدوجة RE223233. TR: RE223233 tandem hidrolik dişli pompa; FR: pompe hydraulique à engrenages tandem RE223233; VI: bơm bánh răng thủy lực kép RE223233; ID: pompa roda gigi hidrolik tandem RE223233.

Get an RE223233 Quote or Production Video

Send your tractor model and serial, a nameplate or pump photo, the quantity you need and your branding needs. We will reply with a configuration check, a quotation with EXW terms and sample options.

Request a QuoteAsk for Factory Video

  • Photos are enough to start
  • Production and inspection video on request

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.