Drilling Rig Mechanical Gear Pump

1 / 2
Type Mechanical Gear Pump
Application Drilling Rig Hydraulic System
Performance Stable Flow & High Efficiency
Design Heavy-Duty & Durable
Service OEM & ODM Available
Options Shaft, Flange & Port Customization
Compatibility Drilling Rig Systems
Product Information

Heavy-Duty Mechanical Gear Pump Engineered for Drilling Rigs

The Olive Branch Hydraulics Drilling Rig Mechanical Gear Pump is a purpose-built, high-pressure hydraulic power unit engineered for the extreme torque, vibration, and contamination loads encountered on rotary, water-well, and geotechnical drilling rigs. Machined from forged high-carbon alloy housings and paired with case-hardened precision gear sets, this hydraulic gear pump for drilling rig applications delivers a stable 210–250 bar continuous working pressure with peak duty cycles up to 280 bar — the operating window most drilling contractors demand.

As a factory-direct mechanical gear pump manufacturer, we design every unit around three non-negotiable performance pillars: volumetric efficiency above 94%, service life exceeding 8,000 operating hours, and drop-in compatibility with SAE, DIN, and ISO mounting standards used by Atlas Copco, Sandvik, and Chinese OEM rig platforms.

Whether you specify a single-stage HGP-series pump for auxiliary circuits or a tandem CBGJ configuration for main hoist and rotary drive, each unit is 100% pressure-tested, flow-verified, and leak-inspected before shipment. For procurement managers weighing cost, lead time, and cross-brand interchangeability, this pump delivers OEM-grade reliability at direct-from-factory pricing — with no distributor markup and no compromise on ISO 9001 traceability.

Key Features That Maximize Drilling Uptime

Downtime on a drilling site can cost operators USD 3,000–15,000 per hour. Every design decision in our OEM drilling rig gear pump is validated against that cost equation.

  • Hardened Alloy Gear Set (HRC 58–62): Precision-ground involute teeth reduce backlash to under 0.02 mm, extending pump life by up to 40% versus standard cast-iron equivalents.
  • DU Bushing Bearing Design: Composite bronze-PTFE bearings tolerate contaminated hydraulic fluid (ISO 4406 code 22/20/17) — critical for dusty drilling environments where oil cleanliness cannot be guaranteed.
  • Balanced Pressure Compensation: Floating side plates automatically adjust axial clearance, maintaining volumetric efficiency above 92% throughout the pump's service life.
  • Wide Viscosity Range (10–800 cSt): Operates reliably across ambient temperatures from –20°C to +80°C, suitable for Middle East desert rigs and Northern European winter operations alike.
  • Reinforced Shaft Seal Package: Viton FKM lip seals rated for continuous 100°C oil temperature, eliminating the most common failure point in field service.
  • Standardized Mounting Flanges: SAE A/B/C, ISO 3019-1, and custom bolt patterns available — reducing retrofit engineering time on your rigs.

The result: fewer unplanned stoppages, longer maintenance intervals, and predictable total cost of ownership across your rig fleet.

Technical Specifications & Performance Data

Series specifications are selection references. Confirm the complete model code and ordered configuration for pressure, speed, displacement, rotation, shaft, flange and ports. Continuous, intermittent and peak ratings must be distinguished; maximum values are not simultaneous operating limits. Machine fitment requires the OEM part number and machine serial number.

Model Displacement (cc/rev) Rated Pressure (bar) Peak Pressure (bar) Max Speed (rpm) Volumetric Efficiency Shaft Type Weight (kg)
CBGJ-2032 32 210 250 2500 ≥94% Spline / Keyed 7.8
CBGJ-2040 40 210 250 2500 ≥94% Spline / Keyed 8.4
CBGJ-2050 50 210 250 2200 ≥94% Spline / Keyed 9.1
CBGJ-2063 63 200 240 2200 ≥93% Spline / Keyed 10.2
CBGJ-2080 80 200 240 2000 ≥93% Spline / Keyed 11.6
CBGJ-2100 100 180 220 2000 ≥92% Spline / Keyed 13.4
CBGJ-2125 125 180 220 1800 ≥92% Spline / Keyed 15.1

Fluid compatibility: HL, HM, HV mineral hydraulic oils per ISO 6743-4. Filtration requirement: ISO 4406 22/20/17 or cleaner. Rotation: CW or CCW by model; reversible configuration must be confirmed. Port standards: SAE flange, BSPP, or metric threaded — configured to your rig's plumbing.

Proven Applications Across Drilling Rig Systems

Our mechanical gear pumps power hydraulic circuits across a wide spectrum of drilling platforms deployed in the Americas, EU, GCC, and Southeast Asian markets. Typical installations include:

  • Rotary Water-Well Drilling Rigs: Main rotary drive and mud pump auxiliary circuit — displacement 50–100 cc/rev.
  • Geothermal & Mineral Exploration Rigs: Hoist and feed cylinder circuits requiring stable pressure under variable load.
  • Truck-Mounted Drilling Rigs: PTO-driven power take-off applications with SAE B/C mounting flanges.
  • Piling & Foundation Rigs: Kelly-bar drive systems demanding high torque continuity at 180–210 bar.
  • Coal-Bed Methane (CBM) Rigs: Compact skid-mounted units where footprint and reliability are paramount.
  • Horizontal Directional Drilling (HDD) Machines: Rod-loader and thrust cylinder circuits.
  • Blast-Hole & Quarry Drilling Equipment: Dust-tolerant sealing package handles harsh open-pit environments.

Because each pump is manufactured to interface with standard OEM mounting patterns, replacement and retrofit projects typically require zero re-engineering — a critical advantage for maintenance teams managing mixed-brand rig fleets.

Why Global Buyers Choose Olive Branch Hydraulics

Procurement managers across Europe, North America, the Middle East, and Southeast Asia partner with Olive Branch Hydraulics because we combine the pricing advantage of a factory-direct source with the discipline of an ISO 9001-certified manufacturing system.

  • 10+ Years of Hydraulic Manufacturing Expertise: A dedicated engineering team specializing in gear pumps (HGP, K3V, CBHZ, CBK, CB-FC, JHP, CBGJ, CBT), cycloidal motors (BM, BMR), and directional/relief valve assemblies.
  • Vertically Integrated Production: In-house precision machining centers, automated assembly lines, and dedicated honing, boring, and grinding equipment — eliminating outsourcing risk and lead-time variability.
  • 100% Pre-Shipment Testing — No Exceptions: Our in-house testing center runs every pump on pressure benches, flow meters, and leak detectors, with material verification via spectrometer analysis.
  • ISO 9001 Quality Management: Full lot traceability from raw forging to final crate, with test certificates supplied per shipment.
  • Proven Export Track Record: Regular container shipments to distributors and OEM assemblers in Germany, USA, UAE, Saudi Arabia, Indonesia, and Vietnam.
  • Multilingual Technical Support: Sales engineers respond within 12 hours in English, and we provide installation drawings, hydraulic schematics, and CAD files on request.

The outcome for buyers: a drilling rig hydraulic pump supplier that behaves like a long-term engineering partner, not a transactional trader.

OEM & Custom Configuration Capabilities

More than 60% of our export volume is shipped under OEM specifications. If your rig platform requires a non-standard configuration, our engineering team can typically deliver a validated design within 15–20 working days.

Custom Options Available

  • Displacement: Any value from 4 cc/rev to 200 cc/rev, including tandem and triple-stack assemblies.
  • Shaft Configurations: Straight keyed, tapered, splined (SAE 9T, 11T, 13T, 15T), or custom flange couplings.
  • Port Configuration: SAE code 61/62 flange, BSPP, NPT, or metric — with custom P/T port orientation.
  • Rotation: CW or CCW configuration; reversible operation requires a specified reversible pump.
  • Housing Material: Standard cast iron or upgraded ductile iron for high-vibration applications.
  • Branding & Packaging: White-label neutral packing, private-label laser engraving, custom color painting, and branded export cartons.

Custom Development Process

  1. Submit rig specifications, hydraulic schematic, or reference pump model.
  2. Receive engineering feasibility review and quotation within 48 hours.
  3. Sample production and factory acceptance testing (10–15 days).
  4. Buyer inspection or third-party SGS/BV verification.
  5. Bulk production release upon sample approval.

Sample MOQ: 1 unit for standard displacements, 2–5 units for fully custom designs.

MOQ, Lead Time & Bulk Order Advantages

We structure our MOQ and pricing tiers to accommodate both distributors stocking spare parts and OEM assemblers running high-volume production lines.

Order Type MOQ Lead Time Unit Price Advantage
Sample Order 1 unit 7–10 days Standard price
Trial Order 10 units 15–20 days 3–5% discount
Standard Bulk 50 units 25–30 days 8–12% discount
OEM Container 200+ units 35–45 days 15–20% discount

Payment terms: 30% T/T deposit, 70% balance against B/L copy. L/C at sight accepted for orders above USD 30,000. Shipping: FOB Ningbo/Shanghai, or CIF/DAP to major ports in Rotterdam, Hamburg, Houston, Jebel Ali, Jakarta, and Ho Chi Minh City. Stock buffer: We maintain rolling inventory on the most-ordered CBGJ 40/50/63/80 cc models — enabling 7-day dispatch for urgent replenishment.

Procurement FAQs: Pricing, Delivery & Compatibility

1. How does your pricing compare to European-branded gear pumps?

As a direct factory supplier without distributor layers, our unit pricing is typically 40–55% lower than equivalent European brands (Bosch Rexroth, Casappa, Marzocchi) at comparable performance specifications. We provide detailed comparison spec sheets on request.

2. Are your pumps interchangeable with existing rig OEM parts?

Yes. Our CBGJ, HGP, and CBT series are dimensionally interchangeable with common Chinese and international OEM patterns. Provide your existing pump model number or a technical drawing, and we will confirm drop-in compatibility before quotation.

3. What documentation is provided with each shipment?

Every shipment includes commercial invoice, packing list, certificate of origin (FORM A / FORM E / CO), ISO 9001 quality certificate, individual pump test reports, and installation instructions in English.

4. Do you offer after-sales technical support and warranty?

All pumps carry a 12-month warranty against manufacturing defects from date of B/L. Our technical team provides remote diagnostic support via email and video call, and offers replacement seals and gear kits at cost during warranty period.

5. Can you accommodate urgent orders for rig downtime emergencies?

Yes. For stocked models, we ship within 7 working days by air freight. We recommend distributors maintain safety stock of high-consumption sizes — we support consignment inventory arrangements for qualified partners with annual purchase commitments above USD 100,000.

Request a Factory-Direct Quote Today

Ready to source a proven high-pressure gear pump for drilling equipment without paying distributor markups? Contact Olive Branch Hydraulics today for a detailed, itemized quotation tailored to your rig platform and volume requirements.

To receive your quote within 12 hours, please share:

  • Required displacement (cc/rev) or reference pump model
  • Operating pressure and RPM range
  • Mounting flange and shaft specifications
  • Order quantity and target delivery port
  • Any OEM branding or custom packaging requirements

Our export team responds in English with full technical documentation, sample pricing, container-load pricing, and lead-time confirmation. Submit your inquiry now and let our engineers help you reduce hydraulic component costs while raising drilling rig uptime.

You May Also Like

Related Articles

Can A Gear Pump Be Reversed?

Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.