How Does A Tandem Gear Pump Work?
Tandem gear pumps deliver independent flow from one shaft. Learn how dual stage gear pumps power complex hydra…
| Catalogue model pattern | Front/rear displacement (mL/r) | Rated front/rear (MPa) | Maximum front/rear (MPa) | L2 (mm) | L (mm) | Reference weight (kg) |
|---|---|---|---|---|---|---|
| CBTL-F410/F410-**** | 10/10 | 20/20 | 25/25 | 166 | 226.5 | 5.5 |
| CBTL-F416/F410-**** | 16/10 | 20/20 | 25/25 | 172.5 | 233 | 5.8 |
| CBTL-F416/F416-**** | 16/16 | 20/20 | 25/25 | 175.8 | 239.5 | 6.1 |
| CBTL-F420/F410-**** | 20/10 | 20/20 | 25/25 | 177 | 237.5 | 6.0 |
| CBTL-F420/F416-**** | 20/16 | 20/20 | 25/25 | 180.3 | 244 | 6.3 |
| CBTL-E420/E420-**** | 20/20 | 16/16 | 20/20 | 182.5 | 248.5 | 6.5 |
| CBTL-E425/F410-**** | 25/10 | 16/20 | 20/25 | 183.5 | 244 | 6.3 |
| CBTL-E425/F416-**** | 25/16 | 16/20 | 20/25 | 186.8 | 250.5 | 6.5 |
| CBTL-E425/E420-**** | 25/20 | 16/16 | 20/20 | 189 | 255 | 6.7 |
| CBTL-E430/F410-**** | 30/10 | 16/20 | 20/25 | 187.5 | 248 | 6.5 |
| CBTL-E430/F416-**** | 30/16 | 16/20 | 20/25 | 190.8 | 254.5 | 6.7 |
Catalogue volumetric efficiency: ≥92% under specified test conditions. Listed speed range: 800–3000 rpm. The optimum-speed column is printed as 500–2500 rpm, which conflicts with the lower bound of that range; confirm the applicable speed specification before manufacture. It has not been silently changed. Dimensions and weights are reference values for the listed configurations.
Mounting: A oval pilot Ø82.55 mm; A1 oval pilot Ø80 mm. Drawing shows 106 mm slot centres, 11 mm slot width and 130 mm flange width. Ports: F flange connection or L screw connection, selected separately. Rotation: clockwise or counterclockwise versions, confirmed from the shaft-end view.
| Option | Original drawing dimensions |
|---|---|
| P keyed | Ø20 mm; key width 6 mm; projection 45 mm; keyed length dimension 28 mm |
| P1 keyed | Ø18 mm; key width 6 mm; projection 41.5 mm; keyed length dimension 28 mm |
| H4 rectangular spline | 4 teeth; major Ø18 mm, minor Ø14.4 mm, tooth width 5 mm; projection 41.5 mm, spline dimension 25 mm |
| H6 rectangular spline | 6 teeth; major Ø20 mm, minor Ø16 mm, tooth width 4 mm; projection 45 mm, spline dimension 28 mm |
| SAE Φ9D | 9 teeth; 16/32 DP, 30° pressure angle; major Ø15.45 mm, minor Ø12.28 mm; projection 31 mm, spline dimension 20 mm |
| SAE Φ10 | 10 teeth; 16/32 DP, 30° pressure angle; major Ø17.04 mm, minor Ø13.86 mm; reference projection 39 mm and spline dimension 23 mm |
| SAE Φ11 | 11 teeth; 16/32 DP, 30° pressure angle; major Ø18.63 mm, minor Ø15.4 mm; confirm projection against the selected drawing |
| SAE Φ13 | 13 teeth; 16/32 DP, 30° pressure angle; major Ø21.81 mm, minor Ø18.63 mm; projection 39 mm, spline dimension 27 mm |
The photographs show the 9-tooth SAE shaft. The other seven options are documented by the original installation drawing; they are not separate photographed samples. Drawing tolerances and the approved configuration control production.
Drawing notes: an inlet-flange fastening execution with M10×1.25 threads has a special CBTL-F4**/F4**-AF** designation and is marked not recommended for selection. When the rear displacement is below 10 mL/r, a single connecting plate can shorten the assembly by 23 mm. Confirm the exact execution before applying this dimensional change.
Olive Branch Hydraulics manufactures hydraulic gear pumps and provides OEM/ODM production from approved samples and drawings. This listing groups the CBTL 4/4 dual pump style, eleven catalogue displacement combinations and eight shaft configurations shown in the original drawing. The photographed reference has two aluminium pumping sections, dark front and rear covers, a central connecting section, oval slotted flange, side flange-port faces and a 9-tooth SAE spline shaft.
The listed models are CBTL-F410/F410, CBTL-F416/F410, CBTL-F416/F416, CBTL-F420/F410, CBTL-F420/F416, CBTL-E420/E420, CBTL-E425/F410, CBTL-E425/F416, CBTL-E425/E420, CBTL-E430/F410 and CBTL-E430/F416. Their individual front/rear displacement and pressure values appear in the parameter table. The model codes are grouped here rather than published as separate products with the same illustrated body style.
F/F combinations have 20/20 MPa rated pressure and 25/25 MPa maximum pressure. E/E combinations have 16/16 MPa rated pressure and 20/20 MPa maximum pressure. Mixed E/F assemblies have 16/20 MPa rated pressure and 20/25 MPa maximum pressure. Preserve both pressure letters and the complete suffix when requesting an assembly. Do not assign the higher stage pressure rating to the entire tandem unit.
The drawing provides two keyed shafts, H4 and H6 rectangular splines, and SAE involute splines with 9, 10, 11 or 13 teeth. Eight dimensional configurations are therefore described in one product group. These options must be selected against the drive coupling, shaft engagement, pilot and available installation space. The photographs represent only the nine-tooth option.
The A and A1 pilot alternatives are 82.55 mm and 80 mm. Confirm mounting-slot spacing, flange dimensions, overall length and port orientation against the installed pump. This dark-cover, slotted-flange CBTL style is distinct from the CBTLQ assembly shown in a separate listing. A similar name or external layout is not sufficient to establish interchangeability.
Flange-port and screw-port configurations are separate alternatives. Port bores, fastening threads, spacing, seals and pipe clearance must be confirmed for both stages. The catalogue contains a special M10×1.25 inlet-flange execution marked not recommended; its special designation must not be confused with a standard port option. The rear-section connecting-plate note also changes length and requires execution-specific confirmation.
The catalogue speed range is 800–3000 rpm, while its optimum-speed column is printed as 500–2500 rpm. Because these lower limits do not agree, the final speed specification requires technical confirmation. Maximum pressure and maximum speed do not establish continuous simultaneous operation at both limits. Actual output depends on displacement, speed, oil temperature, viscosity, inlet conditions and internal leakage.
Clockwise and counterclockwise versions are separate order configurations, confirmed from the shaft-end view. The catalogue may omit a clockwise letter in the complete code. A listing of both rotation choices does not establish that one supplied pump can operate bidirectionally.
The catalogue describes agricultural machinery and other mobile hydraulic applications. No specific tractor, harvester, loader or forklift model is claimed without a verified equipment reference, original pump identification and matching installation dimensions.
The observed sample marking is CBTL-F420/F410-AFΦ9D, identifying the 20/10 displacement combination and the illustrated nine-tooth shaft execution. This is a pump model reference. No independent machine OEM material number or equipment part-number cross-reference has been verified for the photographed assembly. A shared series prefix is not a universal part number. Provide the original equipment parts list and complete nameplate to verify the final application.
Common search spellings include CBTL 4/4, CBTL4/4, CBTL F420/F410, CBTL-F420/F410 and CBTL double gear oil pump. The original dimensional drawing accompanies the product images. Third-party marks are removed from display photographs where visible; no new shaft variants are invented from images.
These multilingual phrases describe the product for customer search. They are not measured search-volume data or confirmation of machine compatibility.
| Market / language | Search phrases |
|---|---|
| English — international buyers | CBTL 4/4 tandem gear pump; CBTL double hydraulic pump; CBTL-F420/F410 pump; CBTL 9 tooth pump; CBTL keyed shaft pump |
| Russia / Kazakhstan — Russian | CBTL сдвоенный шестеренный насос; CBTL двухсекционный гидравлический насос; насос CBTL со шлицевым валом |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica doble de engranajes CBTL; bomba tándem CBTL; bomba CBTL con eje estriado |
| Egypt / Iraq — Arabic | مضخة تروس هيدروليكية مزدوجة CBTL؛ مضخة CBTL بعمود مسنن؛ مضخة CBTL بعمود ذي مفتاح |
| Türkiye — Turkish | CBTL tandem hidrolik dişli pompa; CBTL çift dişli pompa; CBTL kamalı mil pompa |
| Brazil — Portuguese | bomba hidráulica dupla de engrenagens CBTL; bomba tandem CBTL; bomba CBTL com eixo estriado |
| Vietnam — Vietnamese | bơm bánh răng thủy lực đôi CBTL; bơm CBTL trục then hoa; bơm CBTL trục then |
| Indonesia — Indonesian | pompa roda gigi hidrolik tandem CBTL; pompa CBTL poros spline; pompa CBTL poros pasak |
| French-speaking markets | pompe hydraulique double à engrenages CBTL; pompe tandem CBTL; pompe CBTL à arbre cannelé |
Send the original pump marking, photographs of all sides and the shaft end, front/rear displacement, pressure and speed requirements, rotation, mounting measurements, port details and quantity. Olive Branch Hydraulics can assess sample-based manufacture, drawing-based production and tooling requirements after technical review. Final material specification, dimensions, testing, marking and packaging are agreed before production.
Tandem gear pumps deliver independent flow from one shaft. Learn how dual stage gear pumps power complex hydra…
Replacing a backhoe tandem gear pump? Test pressure and flow first, then match both sections, rotation, shaft…
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Can gear pumps run in reverse? Learn how bidirectional gear pump operation works, key design differences, and…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.