CBN300 Rear-Inlet Front-Outlet Hydraulic Gear Pumps 4.5–30 Cc

1 / 3
Item Specification
Manufacturer Olive Branch Hydraulics
Series CBN300 rear-inlet/front-outlet single external gear pump
Displacements 4.5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28 and 30 cm³/rev
Mounting Four-hole rectangular mounting flange; confirm pilot and bolt centres
Oil ports Rear inlet and front outlet arrangement; port identification and dimensions confirmed on the order drawing
Shaft Splined execution illustrated; other drive options assessed against the same body-style drawing
Pressure Model-dependent ratings: see the individual model table below; do not use one pressure limit for all sizes
Speed reference Rated 2,000 rpm; maximum 3,000 rpm, subject to operating conditions
Rotation reference Left-hand catalogue execution; confirm arrow and shaft-end viewing direction
Equipment Agricultural auxiliary hydraulics and hydraulic power units, subject to verified fitment
OEM/material number Confirmed from the installed pump marking, machine reference and dimensional drawing
Product Information

CBN300 gear pumps with rear inlet and front outlet

Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM development for agricultural and mobile equipment. This product group brings together the CBN300 end-port arrangement and its catalogue displacement sizes in one selection guide.

The illustrated pump has a rectangular four-hole mounting flange, a splined drive shaft and connections at the end covers. Compare the front face, rear cover and complete pump marking with the installed unit when requesting a quotation. Port position is a key part of the installation specification.

Model sizes and pressure references

Catalogue model Displacement cm³/rev Rated pressure MPa Maximum pressure MPa
CBN-F304.5 4.5 20 25
CBN-F306.0 6 20 25
CBN-F308.0 8 20 25
CBN-F310.0 10 20 25
CBN-F312.0 12 20 25
CBN-F314.0 14 20 25
CBN-F316.0 16 20 25
CBN-E318.0 18 16 20
CBN-E320.0 20 16 20
CBN-D322.0 22 12.5 16
CBN-D325.0 25 12.5 16
CBN-C328.0 28 10 12.5
CBN-C330.0 30 10 12.5

The ratings above are catalogue references for their individual model rows. Final operating limits are confirmed in the approved supply specification. Maximum pressure is not a continuous operating rating. Different displacements may require different body lengths even when grouped under the same mounting and port arrangement.

Model names and abbreviated search spellings

Catalogue designation Short spelling Spacing / punctuation search forms
CBN-F304.5 CBN-F304.5 CBNF304.5; CBN F304.5
CBN-F306.0 CBN-F306 CBNF306; CBN F306
CBN-F308.0 CBN-F308 CBNF308; CBN F308
CBN-F310.0 CBN-F310 CBNF310; CBN F310
CBN-F312.0 CBN-F312 CBNF312; CBN F312
CBN-F314.0 CBN-F314 CBNF314; CBN F314
CBN-F316.0 CBN-F316 CBNF316; CBN F316
CBN-E318.0 CBN-E318 CBNE318; CBN E318
CBN-E320.0 CBN-E320 CBNE320; CBN E320
CBN-D322.0 CBN-D322 CBND322; CBN D322
CBN-D325.0 CBN-D325 CBND325; CBN D325
CBN-C328.0 CBN-C328 CBNC328; CBN C328
CBN-C330.0 CBN-C330 CBNC330; CBN C330

The shortened and punctuation-free forms help identify an enquiry; they are not additional certified assembly numbers. For example, CBN-E318.0, CBN-E318, CBNE318 and CBN E318 may be used to describe a requested size, but the shaft, mounting, connections and rotation still need confirmation.

Series-level names include CBN300, CBN-300, CBN3 and CBN-3. Chinese product descriptions include CBN后进前出齿轮泵、CBN前后端盖油口齿轮泵、CBN方形法兰液压油泵 and 农机液压齿轮泵. English enquiry terms include rear-inlet front-outlet gear pump, CBN end-port hydraulic pump and agricultural auxiliary hydraulic oil pump.

Drive shaft options within the same body style

The confirmed images show a splined shaft. Provide its tooth count, major and minor diameters, engagement length and mating coupling information. Keyed, flat-end or other drive enquiries can be evaluated from a sample or drawing and remain within this product group after technical confirmation.

Plain key shaft, straight keyed shaft and 平键轴 describe a keyed connection. Splined shaft, spline drive and 花键轴 describe a splined connection. Flat-end shaft, tang drive and 扁口轴 describe a flat drive connection requiring dimensional approval. These names do not by themselves establish that two drive connections are interchangeable.

Confirm the installation before production

Measure the locating pilot, mounting-hole centres, flange thickness and available clearance. Record the oil-port thread or flange dimensions and the position of the hydraulic lines. Check the rotation arrow and viewing direction from the shaft end; a photograph alone is not enough to confirm the required rotation.

Send the continuous and peak working pressures, speed range, oil type, temperature and duty cycle. For a first flow estimate, multiply displacement in cm³/rev by shaft speed and divide by 1,000 to obtain theoretical litres per minute. Actual delivery depends on leakage and operating conditions.

Equipment identification and OEM/ODM enquiries

This group can be assessed for tractor and harvester auxiliary hydraulic circuits and agricultural hydraulic power units. A machine brand, model or OEM material number is confirmed from the original pump identification and technical evidence for each enquiry.

For sample-based manufacture, provide an original unit or a complete dimensional drawing together with the required quantity. We will evaluate the body, drive shaft, mounting and oil connections, then agree the technical specification, inspection requirements, identification and export packing.

The three product reference images show the approved overall view, rear connection and front mounting face. They are not independent photographs of all thirteen displacement sizes. The approved order drawing defines the final supplied configuration.

Frequently asked questions

Why are F, E, D and C models listed together?

They appear in the reviewed catalogue group for this end-port arrangement, with different pressure references. Keep each complete model and its individual rating when specifying the required pump.

Can I order a pump from a size number alone?

Provide the full marking, shaft details, mounting dimensions, port arrangement and rotation so that the correct execution can be confirmed.

Can different shafts be supplied in one order?

Yes, subject to technical confirmation for each execution. State the shaft details and quantity separately within the same product group.

International Search Terms

These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.

Market / language Product search phrases
English — international buyers CBN300 rear-inlet front-outlet hydraulic gear pump
Russia / Kazakhstan — Russian CBN300 шестеренный насос с задним входом и передним выходом
Mexico / Nicaragua / Latin America — Spanish bomba de engranajes con entrada trasera y salida delantera CBN300
Egypt / Iraq / Arabic-speaking markets مضخة تروس هيدروليكية بمدخل خلفي ومخرج أمامي CBN300
Türkiye — Turkish CBN300 arkadan girişli önden çıkışlı hidrolik dişli pompa
Brazil — Portuguese bomba de engrenagens com entrada traseira e saída dianteira CBN300
Vietnam — Vietnamese bơm bánh răng thủy lực cửa hút phía sau cửa ra phía trước CBN300
Indonesia — Indonesian pompa roda gigi hidrolik saluran masuk belakang dan keluar depan CBN300
French-speaking markets pompe à engrenages avec entrée arrière et sortie avant CBN300

Model Identification And OEM Material Numbers

Search family reference: CBN300 rear-inlet front-outlet. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.

Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.