Was ist eine hydraulische Zahnradpumpe? Ein Leitfaden in einfacher Sprache für Branchenprofis
Erfahren Sie, wie hydraulische Zahnradpumpen funktionieren, warum sie in der Industrie weiterhin dominieren un…
| Artikel | Spezifikation |
|---|---|
| Hersteller | Olive Branch Hydraulics |
| Serie | CBN300 Außenzahnradpumpe, Saugseite hinten/Druckseite vorne |
| Fördervolumen | 4,5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28 und 30 cm³/U |
| Befestigung | Rechteckiger Befestigungsflansch mit vier Bohrungen; Zentrierdurchmesser und Lochabstände bitte bestätigen |
| Öranschlüsse | Anordnung Saugseite hinten und Druckseite vorne; Anschlusskennzeichnung und Abmessungen sind der Bestellzeichnung zu entnehmen |
| Welle | Keilwellenausführung abgebildet; andere Antriebsoptionen wurden anhand derselben Gehäusezeichnung bewertet |
| Druck | Modellabhängige Werte: siehe die einzelnen Modelltabellen unten; verwenden Sie nicht einen Druckgrenzwert für alle Baugrößen |
| Drehzahlreferenz | Nenndrehzahl 2.000 U/min; maximal 3.000 U/min, abhängig von den Betriebsbedingungen |
| Drehrichtungsreferenz | Linksdrehende Katalogausführung; Pfeil und Blickrichtung auf das Wellenende bitte prüfen |
| Anwendung | Landwirtschaftliche Hilfshydraulik und hydraulische Antriebsaggregate, vorbehaltlich geprüfter Passung |
| OEM-/Materialnummer | Bestätigt anhand der Typenschildmarkierung der eingebauten Pumpe, der Maschinenreferenz und der Maßzeichnung |
Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM development for agricultural and mobile equipment. This product group brings together the CBN300 end-port arrangement and its catalogue displacement sizes in one selection guide.
The illustrated pump has a rectangular four-hole mounting flange, a splined drive shaft and connections at the end covers. Compare the front face, rear cover and complete pump marking with the installed unit when requesting a quotation. Port position is a key part of the installation specification.
| Catalogue model | Displacement cm³/rev | Rated pressure MPa | Maximum pressure MPa |
|---|---|---|---|
| CBN-F304.5 | 4.5 | 20 | 25 |
| CBN-F306.0 | 6 | 20 | 25 |
| CBN-F308.0 | 8 | 20 | 25 |
| CBN-F310.0 | 10 | 20 | 25 |
| CBN-F312.0 | 12 | 20 | 25 |
| CBN-F314.0 | 14 | 20 | 25 |
| CBN-F316.0 | 16 | 20 | 25 |
| CBN-E318.0 | 18 | 16 | 20 |
| CBN-E320.0 | 20 | 16 | 20 |
| CBN-D322.0 | 22 | 12.5 | 16 |
| CBN-D325.0 | 25 | 12.5 | 16 |
| CBN-C328.0 | 28 | 10 | 12.5 |
| CBN-C330.0 | 30 | 10 | 12.5 |
The ratings above are catalogue references for their individual model rows. Final operating limits are confirmed in the approved supply specification. Maximum pressure is not a continuous operating rating. Different displacements may require different body lengths even when grouped under the same mounting and port arrangement.
| Catalogue designation | Short spelling | Spacing / punctuation search forms |
|---|---|---|
| CBN-F304.5 | CBN-F304.5 | CBNF304.5; CBN F304.5 |
| CBN-F306.0 | CBN-F306 | CBNF306; CBN F306 |
| CBN-F308.0 | CBN-F308 | CBNF308; CBN F308 |
| CBN-F310.0 | CBN-F310 | CBNF310; CBN F310 |
| CBN-F312.0 | CBN-F312 | CBNF312; CBN F312 |
| CBN-F314.0 | CBN-F314 | CBNF314; CBN F314 |
| CBN-F316.0 | CBN-F316 | CBNF316; CBN F316 |
| CBN-E318.0 | CBN-E318 | CBNE318; CBN E318 |
| CBN-E320.0 | CBN-E320 | CBNE320; CBN E320 |
| CBN-D322.0 | CBN-D322 | CBND322; CBN D322 |
| CBN-D325.0 | CBN-D325 | CBND325; CBN D325 |
| CBN-C328.0 | CBN-C328 | CBNC328; CBN C328 |
| CBN-C330.0 | CBN-C330 | CBNC330; CBN C330 |
The shortened and punctuation-free forms help identify an enquiry; they are not additional certified assembly numbers. For example, CBN-E318.0, CBN-E318, CBNE318 and CBN E318 may be used to describe a requested size, but the shaft, mounting, connections and rotation still need confirmation.
Series-level names include CBN300, CBN-300, CBN3 and CBN-3. Chinese product descriptions include CBN后进前出齿轮泵、CBN前后端盖油口齿轮泵、CBN方形法兰液压油泵 and 农机液压齿轮泵. English enquiry terms include rear-inlet front-outlet gear pump, CBN end-port hydraulic pump and agricultural auxiliary hydraulic oil pump.
The confirmed images show a splined shaft. Provide its tooth count, major and minor diameters, engagement length and mating coupling information. Keyed, flat-end or other drive enquiries can be evaluated from a sample or drawing and remain within this product group after technical confirmation.
Plain key shaft, straight keyed shaft and 平键轴 describe a keyed connection. Splined shaft, spline drive and 花键轴 describe a splined connection. Flat-end shaft, tang drive and 扁口轴 describe a flat drive connection requiring dimensional approval. These names do not by themselves establish that two drive connections are interchangeable.
Measure the locating pilot, mounting-hole centres, flange thickness and available clearance. Record the oil-port thread or flange dimensions and the position of the hydraulic lines. Check the rotation arrow and viewing direction from the shaft end; a photograph alone is not enough to confirm the required rotation.
Send the continuous and peak working pressures, speed range, oil type, temperature and duty cycle. For a first flow estimate, multiply displacement in cm³/rev by shaft speed and divide by 1,000 to obtain theoretical litres per minute. Actual delivery depends on leakage and operating conditions.
This group can be assessed for tractor and harvester auxiliary hydraulic circuits and agricultural hydraulic power units. A machine brand, model or OEM material number is confirmed from the original pump identification and technical evidence for each enquiry.
For sample-based manufacture, provide an original unit or a complete dimensional drawing together with the required quantity. We will evaluate the body, drive shaft, mounting and oil connections, then agree the technical specification, inspection requirements, identification and export packing.
The three product reference images show the approved overall view, rear connection and front mounting face. They are not independent photographs of all thirteen displacement sizes. The approved order drawing defines the final supplied configuration.
They appear in the reviewed catalogue group for this end-port arrangement, with different pressure references. Keep each complete model and its individual rating when specifying the required pump.
Provide the full marking, shaft details, mounting dimensions, port arrangement and rotation so that the correct execution can be confirmed.
Yes, subject to technical confirmation for each execution. State the shaft details and quantity separately within the same product group.
These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.
| Market / language | Product search phrases |
|---|---|
| English — international buyers | CBN300 rear-inlet front-outlet hydraulic gear pump; CBN300 rear-inlet front-outlet gear oil pump |
| Russia / Kazakhstan — Russian | CBN300 rear-inlet front-outlet шестеренный насос; CBN300 rear-inlet front-outlet гидравлический насос |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica de engranajes CBN300 rear-inlet front-outlet; bomba CBN300 rear-inlet front-outlet |
| Egypt / Iraq / Arabic-speaking markets | مضخة تروس هيدروليكية CBN300 rear-inlet front-outlet |
| Türkiye — Turkish | CBN300 rear-inlet front-outlet hidrolik dişli pompa; CBN300 rear-inlet front-outlet dişli pompa |
| Brazil — Portuguese | bomba hidráulica de engrenagens CBN300 rear-inlet front-outlet |
| Vietnam — Vietnamese | bơm bánh răng thủy lực CBN300 rear-inlet front-outlet |
| Indonesia — Indonesian | pompa roda gigi hidrolik CBN300 rear-inlet front-outlet |
| French-speaking markets | pompe hydraulique à engrenages CBN300 rear-inlet front-outlet |
Search family reference: CBN300 rear-inlet front-outlet. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.
Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.
Erfahren Sie, wie hydraulische Zahnradpumpen funktionieren, warum sie in der Industrie weiterhin dominieren un…
Ohne Priming versagt Ihre Zahnradpumpe in Sekunden. Erfahren Sie das 5-Minuten-Verfahren, das Riefenbildung, K…
Vergleichen Sie die vertrauenswürdigsten Marken für Hydraulikzahnradpumpen mit einem datenbasierten Ranking fü…
Leitfaden für Ingenieure zur Auswahl einer Hydraulik-Zahnradpumpe für den Kranbetrieb: Druck, Fördervolumen, M…
Kontaktieren Sie uns jetzt für eine professionelle Lösung und ein schnelles Angebot.
Fill in your info to start a conversation.