What Is a Hydraulic Gear Pump? A Plain-English Guide for Industry Pros
Discover how hydraulic gear pumps work, why they still dominate industry, and key components to watch when spe…
| Parameter | Specification |
|---|---|
| Part number reference | 39U2-60160 (replacement identification only) |
| Product type | Hydraulic gear pump, aftermarket replacement |
| Application | Hyundai forklift hydraulic systems |
| Matching basis | Complete assembly code, forklift model, equipment details |
| Inspection | 100% final inspection before packaging |
| Warranty | One year, stated in written quotation |
| MOQ (stocked models) | 1 piece |
| Dispatch (stocked models) | 3–5 business days |
| Customization | Custom P/T ports, OEM builds to specification |
| Incoterm | EXW Hebei, China |
This forklift hydraulic gear pump is an aftermarket replacement for Hyundai part number 39U2-60160, also listed as 39U260160 and 25C32X813, with a 32 cm³/rev displacement, a Ø20 mm six-spline drive shaft and clockwise rotation viewed from the shaft end.
The pump feeds the lift, tilt and steering circuits on Hyundai HC30/HD30 forklifts referenced with the D4BB engine. On the suction side it uses a 25 mm inlet flange interface, and on the pressure side a 20 mm outlet flange interface. Those four points are displacement, shaft, rotation direction and flange interfaces. A replacement has to match all four before it can bolt on and run in the right direction.
The most common sourcing mistake with this part number is catalogue overlap. One third-party catalogue card for the 39U2 series shows an image of a TCM 117M7-10321 pump. We list that part below for reference only. It is not an interchange, and the specifications on this page apply to 39U2-60160 alone.
A part number gets you to the right family, and the complete assembly code confirms the exact pump.
The 39U2-60160, 39U260160 and 25C32X813 references all point to the same Hyundai application. Hyundai has updated hydraulic components across production years, and pumps sold under one code can differ in port position or flange pattern from earlier builds. For that reason, matching is based on the complete assembly code stamped or tagged on the original pump, together with the forklift model and serial details. If the tag is missing or unreadable, photos of the pump body, shaft end and both ports are usually enough to narrow the match.
The drive is a Ø20 mm (approx. 0.79 in) six-spline shaft, and rotation is clockwise when viewed from the shaft end. If a pump has the correct spline but the wrong rotation, it will not prime. Run that way, it usually damages the shaft seal and bushings within minutes. Confirm rotation on the old pump or in the engine-side drive documentation before ordering, and do not rely on the pump's shape alone.
The suction side uses a 25 mm (approx. 1 in) inlet flange interface, and the pressure side uses a 20 mm (approx. 0.79 in) outlet flange interface. Flange bolt spacing and O-ring groove size determine whether the existing hoses and adapters can be reused. If your fleet has been modified with different fittings, state this in the inquiry so the port configuration can be checked against your setup.
Displacement, shaft, rotation and both flange interfaces must all match. A match on three out of four is a mismatch.
These two parts appear on the same third-party catalogue card. They are grouped here for reference and are not interchangeable.
| Parameter | 39U2-60160 / 39U260160 / 25C32X813 | 117M7-10321 |
|---|---|---|
| OEM application reference | Hyundai HC30/HD30, D4BB engine | TCM forklift |
| Pump type | External gear pump | External gear pump |
| Displacement | 32 cm³/rev (approx. 1.95 in³/rev) | Confirm from original pump or drawing |
| Drive shaft | Ø20 mm six-spline | Confirm from original pump or drawing |
| Rotation | Clockwise, viewed from shaft end | Confirm from original pump or drawing |
| Inlet interface | 25 mm flange | Confirm from original pump or drawing |
| Outlet interface | 20 mm flange | Confirm from original pump or drawing |
| Rated pressure and speed | Confirmed against assembly code at quotation | Confirm from original pump or drawing |
| Distributor cross-reference | 39U260160, 25C32X813 | Hidraoil GFX85064 |
| Product photos on this page | Yes | No |
Catalogue grouping indicates that two parts are similar. It does not establish that they fit the same machine.
A Rui Chen catalogue card for the 39U2 series includes an image of a 117M7-10321 pump. The same source lists Isuzu C240PKJ, Yanmar 4TNE98 and Xinchai engine references. These are catalogue leads that tell you where to look next. They do not confirm a fit. Third-party catalogue and distributor references, including Hidraoil GFX85064, belong to their respective holders.
For the 117M7-10321, the displacement, pressure, speed, rotation, shaft, flange and port data must come from the original pump or a drawing. The TCM application differs from the Hyundai application documented above. Quoting the 117M7 using 39U2 data would mean guessing on every dimension that determines fit. If you need the TCM part, send the pump or its drawing, and it will be matched as a separate item.
Not sure which code is on your pump?Send photos of the nameplate, shaft end and both ports along with the forklift model, and the match is checked against the complete assembly code before pricing.
All terms are stated in a written quotation, along with unit pricing by quantity.
MOQ
1 piece (stocked models)
Custom or OEM builds: MOQ confirmed per configuration
Dispatch
3–5 business days (stocked models)
Custom lead time fixed in quotation before tooling
Pricing
Unit price by quantity break
Quantity tiers listed in the written quotation
Incoterm
EXW Hebei, China
Handover at the manufacturing facility in Hebei
Payment
Confirmed in written quotation
Stated with the price and quantity tiers
Warranty
One year
Coverage terms stated in the written quotation
Production takes place at a manufacturing partner in Ningjin, established in August 2010 and located about 9 km from the Xinji sales office.
Custom work is checked against the drawing you approve, not against a general catalogue specification.
Pressure and tank port positions and interfaces can be changed for distributors who stock one pump body across different hose layouts. Port positions are verified against the approved drawing before the batch ships.
OEM and aftermarket gear pumps are built to customer drawings or a supplied sample. Mounting interface, shaft and rotation are fixed in the drawing stage.
You approve design drafts and 3D renders before any sample is cut, so dimensional disagreements are resolved on paper.
The tooling fee is refunded in full once cumulative purchases of the model reach the agreed quantity. Quantities from multiple orders count toward that total.
Send the drawing or sample, target quantity and destination port.
Drafts and 3D renders are issued for your approval.
Samples are built to the approved drawing, with lead time stated in the quotation.
In-process quality control runs against the approved configuration.
100% final inspection is done before packaging. Dimensional, leak and pressure/flow checks are performed as agreed in the quotation.
Send the code from the original pump, your forklift model, the quantity and your destination port. You will receive a written quotation within 24 hours covering fit confirmation, unit price by quantity, warranty and EXW terms.
Three pieces of information settle most matching questions on the first reply.
Send the original product code 39U2-60160 exactly as it appears on the old pump or in the parts book. Add the forklift model, then any serial or engine details you can read off the truck data plate. If the old pump is still on the bench, include photos of the shaft end, the port faces and the nameplate. With these inputs we can match the assembly instead of guessing from a catalogue line.
A single Hyundai part number can cover several assembly variants across model years. The complete assembly code is the deciding reference, and the Hyundai name and model are used for identification only. They do not indicate an original or authorised part. Where the code and the truck data disagree, we flag the conflict in writing before quoting.
These are the points we verify against your old pump before confirming a match.
39U2-60160 is read together with the full assembly code stamped on the pump body. If the plate is worn, the truck model and equipment details carry the identification instead.
This is a hydraulic gear pump for Hyundai forklift hydraulic systems. The fit is confirmed per truck model, because drive arrangements can differ between engine and electric variants.
We check spline or keyed shaft type, tooth count and direction of rotation viewed from the shaft end. A rotation mismatch is the most common reason a gear pump that bolts on still fails to deliver flow.
Inlet and outlet sizes, thread type, port positions and flange bolt pattern are compared with the old unit. Pressure and displacement figures are not quoted from a catalogue. They are confirmed item by item against the complete assembly code.
Fleet managers need a pump matched to the truck model so a planned repair does not turn into extended downtime.
Warehouse operators replacing a failed lift pump usually need one stocked unit dispatched fast.
Multi-shift sites often keep one spare pump per truck model on the shelf to cover breakdowns.
Distributors buy in repeat quantities and need consistent builds plus written tiered pricing.
Workshops replacing a pump that cannot be rebuilt need a direct-fit mounting interface and a match confirmed before ordering.
The standard build follows the original assembly for direct replacement on the truck. It suits workshops and fleets that need one unit to fit the existing mounting and hose layout. No drawing approval or tooling is involved, so stocked units go straight to inspection and packing.
Distributors can order OEM or aftermarket gear pumps built to their own specification, including custom P/T port configurations for their regional hose standards. Design drafts and 3D renders are sent for approval before sampling starts. Where a custom build needs tooling, the fee is refunded in full once cumulative purchases of that model reach the agreed quantity, and quantities from separate orders count towards that total. The same RFQ can also cover pumps compatible with Rexroth, Parker, Vickers or Yuken series, so one quotation consolidates several product lines.
Stocked and custom orders run on different terms, and both are fixed in a written quotation.
| Item | Stocked models | Custom / OEM orders |
|---|---|---|
| MOQ | 1 piece | Varies by product series; confirmed on enquiry |
| Dispatch / lead time | Ships within 3–5 business days | Set by configuration and quantity; each stage confirmed in the quotation |
| Tooling fee | Not applicable | Stated in the quotation; fully refunded at the agreed cumulative quantity |
| Pricing | Unit price by quantity tier | Unit price by quantity tier, plus refund quantity |
| Terms in writing | Warranty and EXW Hebei, China | Warranty, EXW Hebei, China; payment terms confirmed in the quotation |
Production runs at our manufacturing partner in Ningjin, established in August 2010 and about 9 km from the Xinji sales office.
The quotation lists the inspection items for your order, typically dimensional checks, leak inspection, and pressure or flow testing where applicable, plus any documents you require.
Machined parts and sub-assemblies are checked during production, before the pump is closed up.
Every pump is inspected before packaging rather than sampled from the batch. Shaft, rotation and port details are compared with the confirmed specification.
Pumps are typically sealed with port caps, individually boxed and cartoned for export freight.
Goods are handed over at the manufacturer's facility in Hebei on EXW Hebei, China terms, ready for your forwarder.
Send the model, quantity and destination port. For a replacement match, add the original product code, the forklift model and the equipment details. You will get a written quotation with tiered unit pricing, warranty and EXW terms within 24 hours, by email at [email protected] or by phone on +8615075996564.
Original code 39U2-60160 and assembly code, Forklift model and equipment details, Quantity and destination port
Discover how hydraulic gear pumps work, why they still dominate industry, and key components to watch when spe…
Skip priming and your gear pump dies in seconds. Learn the 5-minute procedure that prevents scoring, cavitatio…
Compare the most trusted hydraulic gear pump brands with a data-driven ranking built for procurement teams who…
Engineer's guide to selecting a hydraulic gear pump for crane duty: pressure, displacement, MTBF, and the 4 sp…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.