R979016699 95174200 Splined Tandem Gear Pump For Valtra Valmet

1 / 3
Item Specification / reference
Construction Aluminium tandem external gear pump with splined drive
Assembly references R979016699; Valtra / Valmet 95174200
Displacement / rotation 11 + 14 cm³/rev, left-hand supplier reference configuration; section order and viewing direction to be confirmed
Drive shaft Splined shaft as photographed; spline count, major/minor diameters, standard and projection require measurement or approved drawing
Mounting / ports Rectangular front flange and side ports; pilot, hole centres and inlet/outlet dimensions to approved sample or drawing
Equipment / function OEM catalogue: Valtra / Valmet BL with Sisu engine (T44 project); hydraulic steering and open-centre auxiliary control
Additional supplier applications A650, A750, A850, A950, A990; confirm exact machine version and existing pump number before ordering
Pressure / speed Working / peak pressure and rated / maximum speed require confirmation for supplied configuration
Product Information

R979016699 / 95174200 splined-drive tandem gear pump

Olive Branch Hydraulics is a Chinese hydraulic component manufacturer supporting OEM/ODM production, tooling development and sample-based matching. This listing groups the approved aluminium two-section pump style with the splined shaft shown in the photographs. Please quote the complete assembly number and machine identification when requesting a manufacturing assessment.

Material number and equipment identification

The Bosch agricultural application catalogue FL-BRM-0243 associates Valtra / Valmet number 95174200 with Bosch R979016699. Its application entry describes the BL configuration with Sisu engine, T44 project, for hydraulic steering and open-centre auxiliary control. Confirm the actual engine and hydraulic configuration against the machine serial number.

The Chinese supplier additionally lists A650, A750, A850, A950 and A990 tractor applications. These supplier application references require confirmation against the existing pump plate, shaft, mounting and port arrangement; they are not a guarantee that every version of these tractors uses this assembly. Valtra, Valmet and Bosch Rexroth names are used for application and reference identification.

Two-section reference configuration

The supplier describes 11 + 14 cc per revolution with left-hand rotation. The unequal section capacities must be matched individually to the machine circuits. Total displacement alone does not establish the correct hydraulic function. Confirm the section order and rotation as viewed from the drive end before production.

The photographed configuration has a splined drive. The spline tooth count, shaft diameter, projection and coupling standard have not been verified from a dimensioned drawing and must be measured. Do not apply tapered-shaft dimensions from a different pump to this product family. Working pressure and speed limits will be agreed for the supplied configuration and duty cycle.

Manufacturing and drawing confirmation

Please send the original nameplate, front/rear/port-side photographs, mounting pilot, flange bolt centres, shaft dimensions and spline specification, overall length, individual section lengths and all oil-port dimensions. A physical sample is useful when exact copying is required. Shaft and port variants can be reviewed together within the family after drawing or sample approval. A corresponding dimensioned installation drawing has not yet been verified for the photographed unit.

International search terms

English: Valtra Valmet tandem hydraulic gear pump R979016699 95174200; Spanish: bomba hidráulica doble Valtra Valmet 95174200; Portuguese: bomba hidráulica dupla Valtra eixo estriado R979016699; Russian: тандемный шестерённый насос Valtra Valmet шлицевой вал 95174200; Arabic: مضخة تروس هيدروليكية مزدوجة فالترا فالميت R979016699; Turkish: Valtra Valmet tandem hidrolik dişli pompa kamalı mil; French: pompe hydraulique double Valtra arbre cannelé 95174200; Vietnamese: bơm bánh răng kép Valtra Valmet trục then hoa; Indonesian: pompa hidrolik tandem Valtra Valmet poros spline R979016699.

Send your quantity, delivery country and approved sample or drawing for configuration confirmation and an OEM/ODM quotation from Olive Branch Hydraulics.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.