Gear Pump Testing: Pressure, Flow and Leak Checks Before Shipment
Gear pump testing under load shows whether a pump delivers rated flow, holds rated pressure and stays leak-fre…
| Item | Configuration reference |
|---|---|
| Brand | Olive Branch Hydraulics |
| Model / Russian marking | NSH14M-10M-3 / НШ-14М-10М-3 |
| Pump type | Two-section external hydraulic gear pump; one drive shaft |
| Nominal displacement | 14 + 10 cm³/rev; theoretical section flow ratio 1.4:1 |
| Origin | China; supply configuration confirmed in the quotation |
| Rotation reference | Right-hand configuration in the illustrated supplier reference; verify from the shaft end |
| Installation details | Splined drive shaft, rectangular four-hole mounting flange and side port faces; dimensions require drawing approval |
| Pressure / speed / seals | Request the data sheet for the quoted execution; no universal pressure or speed rating is assigned |
| Application selection | Agricultural and mobile hydraulic equipment with two required pump flows; confirm the exact machine and circuit |
The NSH14M-10M-3 is a compact tandem gear-pump reference for enquiries requiring nominal 14 and 10 cm³/rev sections. Two external-gear sections share one drive shaft, allowing a single mechanical drive to serve two hydraulic flow requirements. Olive Branch Hydraulics offers China-based manufacturing and supply support for Russian and CIS equipment enquiries, with the final configuration agreed against the customer's pump identification and installation drawing.
The 14+10 arrangement differs from a 10+10 or 16+10 tandem. At the same shaft speed, its theoretical flow split is 1.4:1. Actual delivery depends on pressure, speed, oil temperature, viscosity and internal leakage. Do not select the larger section solely by the overall length of the housing.
Common enquiry spellings include NSH14M-10M-3, NSh 14M-10M-3, NSH 14M / 10M, НШ-14М-10М-3 and НШ14М-10М-3. The shorter NSH14-10, NSH14/10 and НШ14-10 describe a displacement combination but do not specify every mounting, pressure or rotation detail.
NSH14N-10N-3 / НШ-14N-10N-3 also appears as a catalogue comparison reference. Treat it as an identification lead, not an automatic interchange approval. Preserve all letters, hyphens, shaft codes and rotation suffixes from the existing pump. Send a readable marking photograph whenever possible.
The photographs show a supplier reference listed as China-manufactured NSH14M-10M-3: the port side, rear cover, shaft-end flange and opposite housing side. They are original reference photographs, not photographs of an Olive Branch production batch. No new pump geometry or viewing angle has been generated. Request current supply photographs and the approved drawing before confirming an order.
The illustrated arrangement has two housing sections separated by a visible joint, a splined input shaft and a rectangular mounting flange with four outer mounting holes. Side port faces and the rear-cover IN/OUT markings can assist identification. Trace the actual inlet and outlet connections on the confirmed drawing; do not decide hose routing from a rear-cover marking alone.
The drive and coupling must suit the combined load of both sections. Separate circuit pressures do not remove the need to check total shaft torque and drive power. Pressure relief, filtration, inlet conditions and commissioning instructions must follow the approved system specification. Continuous, intermittent and peak ratings are different limits.
No. It refers to nominal displacement per revolution. Theoretical section flow in L/min equals section displacement in cm³/rev multiplied by shaft rpm and divided by 1,000; actual delivered flow is lower under load.
The supplier reference describes a right-hand execution. Confirm the arrow and rotation viewed from the shaft end for the unit being quoted. A different rotation requires a corresponding confirmed execution.
No. Match the complete marking, shaft, flange, ports, section order and operating requirements. A machine family name alone cannot establish fit.
No. Ask for the data sheet for this exact execution. Another model's maximum pressure does not establish a continuous working rating for this pump.
Yes. Send clear photographs and measured interfaces for configuration review. OEM/ODM work and sample production can be discussed against an agreed specification.
Contact Olive Branch Hydraulics with the complete model, quantity and technical details above. We will confirm configuration, available supply photographs, production schedule, packaging and commercial terms in the quotation.
НШ-14М-10М-3, НШ14-10, НШ14/10, насос шестеренный сдвоенный, тандемный насос 14+10 см³. Для подбора укажите полную маркировку, направление вращения со стороны вала, размеры вала, фланца и портов.
Gear pump testing under load shows whether a pump delivers rated flow, holds rated pressure and stays leak-fre…
Vane pump vs gear pump: Compare efficiency, noise, cost & applications to find the best hydraulic pump for you…
Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…
Learn how to diagnose & repair hydraulic gear pumps fast. Step-by-step guide covers symptoms, root causes & re…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.