How Does A Tandem Gear Pump Work?
Tandem gear pumps deliver independent flow from one shaft. Learn how dual stage gear pumps power complex hydra…
| Model pattern | Front / rear displacement (mL/r) | L1 (mm) | L2 (mm) | L (mm) | Reference weight (kg) |
|---|---|---|---|---|---|
| CBTLQ-F414/F414-**Φ13* | 14/14 | 59 | 173 | 234.5 | 5.2 |
| CBTLQ-F416/F408-**Φ13* | 16/8 | 60 | 171.5 | 230 | 5.3 |
| CBTLQ-F420/F410-**Φ13* | 20/10 | 62.5 | 177 | 236.5 | 5.6 |
| CBTLQ-F420/F416-**Φ13* | 20/16 | 62.5 | 180 | 243 | 5.8 |
| CBTLQ-F430/F410-**Φ13* | 30/10 | 68 | 187.5 | 247 | 6.0 |
The five table combinations specify 20 MPa rated pressure, 25 MPa maximum pressure, optimum speed 1500–2500 rpm, speed range 800–3000 rpm and volumetric efficiency ≥92% under specified test conditions. Asterisks are configuration placeholders, not a complete order code.
Separate photographed reference: CBTLQ-F416/F416-AFΦ, nominal 16/16 mL/r by its original marking. This combination is not a row in the five-model performance table. Its pressure specification, dimensions and weight require separate confirmation; values from the other rows are not assigned to it.
Oval mounting: A pilot Ø100 mm; A1 pilot Ø101.6 mm. Drawing shows alternative 140 / 146 mm hole centres, two Ø14 mm holes and 175 mm overall flange width. Match the selected pilot and hole spacing to the approved drawing. Shaft: 13-tooth SAE involute spline, 16/32 diametral pitch, 30° pressure angle, major Ø21.8 mm and minor Ø18.63 mm. Overall projection 39 mm; spline length dimension 27 mm as shown.
F = flange ports; L = screw ports. The original flange drawing shows inlet bore Ø20 mm and outlet bore Ø15 mm, with four M6 fixing holes 13 mm deep and circular patterns Ø40 / Ø35 mm respectively. The catalogue screw-port table is separate: front 14/14 and 16/8 combinations use M22×1.5 inlet and M18×1.5 outlet, both 16 mm deep; front 20/10, 20/16 and 30/10 use M33×2 inlet depth 20 mm and M27×2 outlet depth 18 mm. All five rear screw-port rows list M22×1.5 inlet and M18×1.5 outlet, depth 16 mm.
Rotation: clockwise or counterclockwise versions, confirmed from the shaft-end view before manufacture. The photographed flange-port assembly does not establish the thread dimensions of a screw-port version.
Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM production from approved samples and drawings. This product groups the CBTLQ dual pump body style, the five documented catalogue combinations and a separately identified 16/16 mL/r sample marking. The illustrated assembly has two aluminium pumping sections, a central connecting section, oval front flange, 13-tooth SAE drive shaft and side flange-port faces.
The five catalogue combinations are CBTLQ-F414/F414, CBTLQ-F416/F408, CBTLQ-F420/F410, CBTLQ-F420/F416 and CBTLQ-F430/F410. Their front/rear displacements are 14/14, 16/8, 20/10, 20/16 and 30/10 mL per revolution. Full order codes also require the selected flange, port, shaft and rotation suffixes. The asterisks in the parameter table are placeholders.
Common product names include CBTLQ tandem gear pump, CBTLQ double hydraulic pump, CBTLQ dual gear oil pump, CBTLQ oval flange pump and CBTLQ 13-tooth SAE pump. The complete marking on the photographed reference is CBTLQ-F416/F416-AFΦ, indicating a separate nominal 16/16 combination. It is retained as an observed sample reference; its performance and dimensions are not copied from the 16/8 or 20/16 rows. No additional displacement combination is claimed as verified.
The original installation drawing documents the SAE involute spline geometry, including tooth count, pitch, pressure angle and nominal diameters. Only this 13-tooth design is verified for the selected CBTLQ family. Other shaft types require a separate approved drawing and are not represented by these photographs.
The A and A1 pilot choices are 100 mm and 101.6 mm. Match the pilot, bolt spacing, shaft projection, port positions and available installation length to the original pump. Similar oval-flange pumps from other families may have different internal designs and dimensions. A shared appearance or model prefix does not establish interchangeability.
The catalogue provides flange-port and screw-port configurations. The reference photographs show flange-port faces with central bores and surrounding fixing holes. The screw-port specifications in the technical section apply only to those catalogue thread configurations. They must not be transferred to the photographed flange-port sample.
The five catalogue combinations are rated at 20 MPa, with a maximum catalogue pressure of 25 MPa. Their optimum speed is 1500–2500 rpm and the stated speed range is 800–3000 rpm. Volumetric efficiency is listed as at least 92% under the applicable test conditions. Maximum pressure and speed are not a continuous-duty guarantee at both limits simultaneously. Final operating limits depend on the selected assembly, duty cycle, oil viscosity, temperature and inlet supply.
Clockwise and counterclockwise versions must be ordered for the actual drive direction, confirmed from the shaft-end view. Catalogue omission conventions for a clockwise suffix must be checked against the full original code. Listing both rotation choices does not mean that an individual supplied unit is a bidirectional pump.
The catalogue describes agricultural and other mobile hydraulic uses. No specific tractor, harvester, forklift or loader model is assigned without a verified equipment reference and matching installation dimensions. No independently verified machine OEM material number has been established for this photographed assembly.
The observed model CBTLQ-F416/F416-AFΦ is a pump identification code. The separate numeric marking 181111001 is retained only as a sample marking or traceability reference, not an equipment OEM part number. Provide the original equipment parts catalogue, machine serial number and complete pump marking to verify a material number before ordering. Product display images have third-party markings removed where visible; the original dimensional drawing remains a reference for technical review.
These are multilingual product descriptions for customer search, not measured keyword-volume data or confirmation of machine fitment.
| Market / language | Search phrases |
|---|---|
| English — international buyers | CBTLQ tandem hydraulic gear pump; CBTLQ double gear pump; CBTLQ 13 tooth pump; CBTLQ 16/16 cc pump |
| Russia / Kazakhstan — Russian | CBTLQ сдвоенный шестеренный насос; CBTLQ двухсекционный гидравлический насос; насос CBTLQ с 13 шлицами |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica doble de engranajes CBTLQ; bomba tándem CBTLQ; bomba CBTLQ con eje estriado de 13 dientes |
| Egypt / Iraq — Arabic | مضخة تروس هيدروليكية مزدوجة CBTLQ؛ مضخة CBTLQ بعمود مسنن 13 سناً |
| Türkiye — Turkish | CBTLQ tandem hidrolik dişli pompa; CBTLQ çift dişli pompa; CBTLQ 13 dişli yivli mil pompası |
| Brazil — Portuguese | bomba hidráulica dupla de engrenagens CBTLQ; bomba tandem CBTLQ; bomba CBTLQ com eixo estriado de 13 dentes |
| Vietnam — Vietnamese | bơm bánh răng thủy lực đôi CBTLQ; bơm CBTLQ trục then hoa 13 răng |
| Indonesia — Indonesian | pompa roda gigi hidrolik tandem CBTLQ; pompa CBTLQ poros spline 13 gigi |
| French-speaking markets | pompe hydraulique double à engrenages CBTLQ; pompe tandem CBTLQ; pompe CBTLQ à arbre cannelé 13 dents |
Send photographs of the complete assembly, nameplate, shaft end, mounting flange and both sides of the ports. Include front/rear displacement, rotation, working pressure, speed, installation measurements and required quantity. Olive Branch Hydraulics can assess sample-based manufacture, drawing-based production, tooling and custom specifications after technical review. Final materials, dimensions, test requirements, marking and packaging are agreed before manufacture.
Tandem gear pumps deliver independent flow from one shaft. Learn how dual stage gear pumps power complex hydra…
Replacing a backhoe tandem gear pump? Test pressure and flow first, then match both sections, rotation, shaft…
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Can gear pumps run in reverse? Learn how bidirectional gear pump operation works, key design differences, and…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.