Backhoe Loader Tandem Gear Pump Replacement: What to Check
Replacing a backhoe tandem gear pump? Test pressure and flow first, then match both sections, rotation, shaft…
| Catalogue model pattern | Front/rear displacement (mL/rev) | L1 (mm) | L2 (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|
| CBSL-G25/G19-AF* | 25/19 | 68.5 | 154 | 216 | 11.5 |
| CBSL-G25/G23-AF* | 25/23 | 68.5 | 156 | 220 | 11.8 |
| CBSL-G28/G28-AF* | 28/28 | 70 | 162 | 229 | 12.4 |
| CBSL-G33/G19-AF* | 33/19 | 73 | 163 | 225 | 12.1 |
| CBSL-G33/G23-AF* | 33/23 | 73 | 165 | 229 | 12.4 |
| CBSL-G38/G19-AF* | 38/19 | 76 | 168.5 | 230.5 | 12.8 |
| CBSL-G40/G23-AF* | 40/23 | 77 | 200.5 (confirm) | 236.5 | 13.0 |
Rated pressure: 25 MPa. Maximum pressure: 28 MPa. Optimum speed: 1500–2500 rpm. Catalogue speed range: 800–3000 rpm. Volumetric efficiency: ≥92%. Aluminium body with two gear sections and a common inlet.
Mounting A: oval two-hole flange, 101.6 mm pilot, 146 mm hole spacing, two 14 mm holes. Shaft: SAE spline, 13 teeth, 16/32 diametral pitch, 30° pressure angle. F: flange ports. L: counterclockwise; R: clockwise, normally omitted in the ordering code. Confirm the viewing convention and complete shaft/rotation suffix before ordering.
The asterisk in AF* is a configuration placeholder, not a complete part number. The catalogue lists G40/G23 L2 as 200.5 mm; this entry requires drawing confirmation before manufacture. Dimensions apply to the illustrated configuration.
Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM production, sample-based development and manufacture to approved drawings. The CBSL series combines two gear pumping sections on one drive shaft. This product groups the verified displacement combinations for the photographed oval two-hole flange body, with aluminium housings and a 13-tooth SAE spline shaft.
The photographs show the overall pump, front flange and shaft, outlet side and rear cover. They are reference views of this external body style and do not prove the exact displacement or rotation of each catalogue model. The original installation drawing is included in the gallery so customers can check the shaft, mounting and port layout.
| Catalogue model pattern | Front/rear displacement (mL/rev) | L1 (mm) | L2 (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|
| CBSL-G25/G19-AF* | 25/19 | 68.5 | 154 | 216 | 11.5 |
| CBSL-G25/G23-AF* | 25/23 | 68.5 | 156 | 220 | 11.8 |
| CBSL-G28/G28-AF* | 28/28 | 70 | 162 | 229 | 12.4 |
| CBSL-G33/G19-AF* | 33/19 | 73 | 163 | 225 | 12.1 |
| CBSL-G33/G23-AF* | 33/23 | 73 | 165 | 229 | 12.4 |
| CBSL-G38/G19-AF* | 38/19 | 76 | 168.5 | 230.5 | 12.8 |
| CBSL-G40/G23-AF* | 40/23 | 77 | 200.5 (confirm) | 236.5 | 13.0 |
The model table is the scope of the verified range on this page. The overview range and detailed catalogue table differ: the table explicitly includes G28/G28 with a 28 mL/rev rear section. That row is retained as a catalogue-listed combination and requires the matching configuration drawing when ordering.
The G40/G23 L2 value is printed as 200.5 mm in the reference table. This value has not been silently changed and must be checked against a confirmed assembly drawing before machining, installation or interchange decisions. Catalogue weights are reference values and can vary with the final configuration.
Common search descriptions include CBSL tandem gear pump, CBSL dual gear oil pump, CBSL double hydraulic pump, CBSL G-series high pressure gear pump and CBSL agricultural hydraulic pump. Model spellings may use spaces, hyphens or en dashes, for example CBSL-G25/G19, CBSL G25/G19 and CBSL–G25/G19. The same spelling variations apply to G25/G23, G28/G28, G33/G19, G33/G23, G38/G19 and G40/G23.
The catalogue model pattern ends in -AF*: A identifies the oval mounting arrangement, F identifies flange port connection, and the remaining configuration must be completed for the selected shaft and rotation. The asterisk is not a literal part number. No separate machine OEM material number or specific tractor/harvester fitment has been verified for these catalogue configurations.
The catalogue lists rated pressure of 25 MPa and maximum pressure of 28 MPa, with optimum speed of 1500–2500 rpm and an operating range of 800–3000 rpm. Listed volumetric efficiency is at least 92%. Maximum pressure is a catalogue limit, not a continuous-duty operating recommendation. Select both sections against the actual duty cycle, oil temperature, inlet conditions and combined drive torque.
Displacement is specified separately for the front and rear sections. Actual flow depends on displacement, speed and volumetric efficiency. Confirm whether the application requires equal or unequal circuit flows before selecting a model.
| Interface | Reference drawing specification |
|---|---|
| Pilot | Nominal diameter 101.6 mm |
| Mounting | Oval two-hole flange; 146 mm bolt centres; two 14 mm holes |
| Shaft spline | 13 teeth; 16/32 diametral pitch; 30° pressure angle |
| Spline diameters | Nominal major diameter 21.8 mm; minor diameter 18.63 mm, with drawing tolerances controlling |
| Shaft projection | 41.5 mm overall reference; 33 mm spline dimension as shown on the original drawing |
Only the SAE 13-tooth shaft is verified for this selected catalogue configuration. Other shaft forms are not represented as confirmed CBSL options on this page. Different makers may use similar series names while changing internal design or installation dimensions; a matching model prefix alone does not establish interchangeability.
The original drawing identifies a common inlet and separate section outlets. The listed common inlet is 32 mm with a 58.7 × 30.2 mm flange hole pattern. Each outlet is listed as 20 mm with a 47.6 × 22.2 mm flange hole pattern. The connection table lists M10 threaded mounting holes, 18 mm deep. Confirm seals, fasteners, clearance and port orientation against the final installation drawing.
This tandem configuration can supply two hydraulic circuits on agricultural and mobile machinery. Exact equipment fitment requires the original nameplate, both section displacements, rotation, pilot, bolt centres, shaft and port layout. We do not assign an unsupported machine brand, vehicle model or OEM material number to this catalogue pump.
Send the complete pump marking, clear photographs of every side, front/rear displacement, pressure and speed requirements, rotation viewed from the shaft end, shaft dimensions, mounting measurements and port details. Olive Branch Hydraulics can evaluate your sample or drawing, confirm the assembly specification and discuss OEM/ODM manufacture. An exact new configuration may require a sample and tooling.
Customer search keywords: CBSL tandem hydraulic gear pump, CBSL G25 G19 double pump, CBSL G33 G23 hydraulic pump, CBSL 25 MPa gear pump, oval flange 13 tooth gear pump, agricultural dual hydraulic pump, China hydraulic pump manufacturer.
These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.
| Market / language | Product search phrases |
|---|---|
| English — international buyers | CBSL tandem hydraulic gear pump; CBSL double gear pump |
| Russia / Kazakhstan — Russian | CBSL сдвоенный шестеренный насос; CBSL двухсекционный гидравлический насос |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica doble de engranajes CBSL; bomba CBSL |
| Egypt / Iraq / Arabic-speaking markets | مضخة تروس هيدروليكية مزدوجة CBSL |
| Türkiye — Turkish | CBSL tandem hidrolik dişli pompa; CBSL çift dişli pompa |
| Brazil — Portuguese | bomba hidráulica dupla de engrenagens CBSL |
| Vietnam — Vietnamese | bơm bánh răng thủy lực đôi CBSL |
| Indonesia — Indonesian | pompa roda gigi hidrolik tandem CBSL |
| French-speaking markets | pompe hydraulique double à engrenages CBSL |
Search family reference: CBSL. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. The catalogue reference listed below is limited to the G33/G23 configuration; it has not been verified from an equipment OEM parts manual for the photographed assembly. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.
Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.
| Reference number | Published catalogue model | Scope |
|---|---|---|
| 60313122 | CBSL-G33/G23-AFφ | Catalogue-listed SANY double gear pump set; 33/23 configuration only |
Sany Makmur Perkasa lists part number 60313122 with the model CBSL-G33/G23-AFφ. This is a catalogue search reference, not a declaration that every CBSL pump or the photographed assembly is interchangeable with that part. Confirm the original nameplate, equipment serial number, flange, shaft, port layout, rotation and operating specification before ordering. An equipment OEM parts manual has not been obtained to verify the final machine application.
Reference searches: 60313122 gear pump; CBSL-G33/G23-AFφ 60313122; насос CBSL-G33/G23 60313122; bomba doble CBSL 60313122; pompa hidrolik CBSL 60313122.
Published source: Sany Makmur Perkasa hydraulic spare-parts catalogue. Supplier catalogue numbering is kept distinct from Olive Branch manufacturing identification.
Replacing a backhoe tandem gear pump? Test pressure and flow first, then match both sections, rotation, shaft…
Tandem gear pumps deliver independent flow from one shaft. Learn how dual stage gear pumps power complex hydra…
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Learn how to choose a high pressure hydraulic gear pump by continuous pressure, duty cycle and mounting interf…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.