CBNT 5/4 Tandem Gear Pumps With Square Flange And Two Shaft Options

1 / 3

CBNT 5/4 Tandem Gear Pump Specifications

Model family Front/rear displacement (mL/rev) L1 (mm) L2 (mm) L (mm) Weight (kg)
CBNT-F525/F410 25/10 68.5 152 213 10.7
CBNT-F525/F416 25/16 68.5 155 219.5 11.0
CBNT-F532/F416 32/16 71.5 161 225.5 11.3
CBNT-F540/F420 40/20 74.5 169.5 236 11.8
CBNT-F550/F425 50/25 78.5 181 250.5 12.4
CBNT-F563/F425 63/25 84 192 261.5 12.9

Rated pressure: 20 MPa. Maximum pressure: 25 MPa. Optimum speed: 1500–2500 rpm. Catalogue operating range: 800–3000 rpm. Volumetric efficiency: ≥92%.

B mounting: square four-hole flange with 90 mm pilot, 110 × 86 mm bolt pattern and four 11 mm holes. P: plain keyed shaft; H6a: rectangular spline shaft. F: flange ports; L: screw ports. Rotation: L counterclockwise; clockwise R is normally omitted in the catalogue code. Confirm direction from the shaft end against the final drawing.

Dimensions and weights refer to the illustrated catalogue configuration. Complete shaft, port and rotation suffixes require confirmation; the model code alone does not specify every installation detail.

Product Information

CBNT 5/4 Dual Hydraulic Gear Pump

Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM production, sample-based development and manufacture to approved drawings. The CBNT 5/4 tandem arrangement combines a larger front gear section with a smaller rear section on one drive shaft, providing two hydraulic flows from a compact assembly.

This listing groups the six verified displacement combinations for the photographed four-hole square-flange body style. The photographs show a rectangular-spline shaft and blue port covers. A plain keyed shaft is documented in the installation drawing; it is not presented as an additional photographed configuration. The photos have had the original manufacturer nameplate removed for presentation.

Models, Displacements And Catalogue Dimensions

Model family Front/rear displacement (mL/rev) L1 (mm) L2 (mm) L (mm) Weight (kg)
CBNT-F525/F410 25/10 68.5 152 213 10.7
CBNT-F525/F416 25/16 68.5 155 219.5 11.0
CBNT-F532/F416 32/16 71.5 161 225.5 11.3
CBNT-F540/F420 40/20 74.5 169.5 236 11.8
CBNT-F550/F425 50/25 78.5 181 250.5 12.4
CBNT-F563/F425 63/25 84 192 261.5 12.9

The two figures in each displacement pair identify the front and rear sections. For example, CBNT-F525/F410 specifies a 25 mL/rev front section with a 10 mL/rev rear section. Catalogue lengths and weights are references for the illustrated assembly; shaft, mounting and connection changes require a confirmed configuration drawing.

Alternative Names And Ordering Codes

Customer search descriptions include CBNT tandem gear pump, CBNT dual gear oil pump, CBNT double hydraulic pump, CBNT 5/4 hydraulic pump and CBNT-F5/F4 gear pump. Common spelling variants include CBNT-F525/F410, CBNT F525/F410 and CBNTF525/F410. The same spacing and hyphen variations apply to F525/F416, F532/F416, F540/F420, F550/F425 and F563/F425.

The reference catalogue uses model patterns such as CBNT-F525/F410-****. The asterisks indicate missing configuration choices and are not a complete orderable suffix. F is the 20 MPa pressure grade in the main model; B identifies the square mounting arrangement, F or L identifies flange or screw ports, and P or H6a identifies the shaft option. Left-hand rotation is marked L; right-hand R is normally omitted. Complete the actual order code only after confirming the drawing and rotation.

No separate machine OEM material number or specific tractor/harvester fitment has been verified for these catalogue configurations. Similar prefixes from another manufacturer do not establish dimensional or functional interchangeability.

Pressure And Speed Selection

The catalogue lists rated pressure of 20 MPa, maximum pressure of 25 MPa, optimum speed of 1500–2500 rpm and an operating range of 800–3000 rpm. Listed volumetric efficiency is at least 92%. Maximum pressure is not a continuous-duty operating recommendation. Select both sections against the required pressure, oil temperature, speed, inlet conditions and combined shaft torque.

Actual flow depends on section displacement, speed and volumetric efficiency. Verify the required flow for each circuit independently. Confirm rotation as viewed from the shaft end before manufacturing or installing the pump.

Mounting And Shaft Options

Feature Reference drawing specification
B square flange 134 × 110 mm overall; four 11 mm mounting holes on a 110 × 86 mm pattern; nominal 90 mm pilot
P plain keyed shaft Nominal shaft diameter 25 mm; key width 8 mm; 40 mm projection shown
H6a rectangular spline Six-tooth form illustrated; nominal major diameter 25 mm, minor reference 20.1 mm; tooth width 6 mm; 35 mm projection shown

Drawing tolerances control the final shaft and pilot fit. The keyed and rectangular-spline versions belong to the selected family, but they require different couplings. The existing photographs establish the rectangular-spline appearance only. Do not infer a third shaft option from a similar pump elsewhere.

Flange And Screw Port Configurations

The source drawing includes flange connections and separate screw-port details for the front and rear sections. Port bore and flange hole pattern vary with the displacement combination. Use the complete model and the confirmed installation drawing when specifying ports, seals and mounting bolts.

Screw-port configuration Drawing detail
Front section, 25 or 32 mL/rev Inlet M27×2, depth 18 mm, spotface 45 mm
Front section, 40 mL/rev and above Inlet M33×2, depth 20 mm, spotface 50 mm
Rear section above 18 mL/rev Inlet M33×2, depth 20 mm; outlet M27×2, depth 18 mm; inlet/outlet spotfaces 50/45 mm
Rear section up to 18 mL/rev Inlet M22×1.5, depth 16 mm; outlet M18×1.5, depth 16 mm; both spotfaces 40 mm

These screw-port notes describe the illustrated threaded variants. They must not be applied to the photographed flange-port configuration without changing the specification. The original dimension drawing is provided in the image gallery as an installation reference.

Agricultural And Mobile Hydraulic Applications

Tandem gear pumps can supply separate working circuits on agricultural and mobile machinery. Exact fitment requires the original pump marking, both section displacements, mounting dimensions, shaft, port layout and rotation. Please send photographs and measurements of the original assembly when requesting a fitment evaluation.

OEM/ODM Manufacturing Enquiries

Provide the complete pump nameplate, front and rear section displacements, pressure and speed requirements, shaft measurements, flange dimensions, port details and direction of rotation. Olive Branch Hydraulics can evaluate your sample or drawing, confirm the assembly specification and discuss custom manufacture. An exact new configuration may require a sample and tooling.

Customer search keywords: CBNT agricultural tandem hydraulic pump, CBNT F525 F410 double gear pump, CBNT F540 F420 pump, CBNT F563 F425 hydraulic pump, square flange gear pump, keyed shaft tandem pump, six tooth rectangular spline pump, China hydraulic gear pump manufacturer.

International Search Terms

These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.

Market / language Product search phrases
English — international buyers CBNT 5/4 tandem hydraulic gear pump; CBNT 5/4 double gear pump
Russia / Kazakhstan — Russian CBNT 5/4 сдвоенный шестеренный насос; CBNT 5/4 двухсекционный гидравлический насос
Mexico / Nicaragua / Latin America — Spanish bomba hidráulica doble de engranajes CBNT 5/4; bomba CBNT 5/4
Egypt / Iraq / Arabic-speaking markets مضخة تروس هيدروليكية مزدوجة CBNT 5/4
Türkiye — Turkish CBNT 5/4 tandem hidrolik dişli pompa; CBNT 5/4 çift dişli pompa
Brazil — Portuguese bomba hidráulica dupla de engrenagens CBNT 5/4
Vietnam — Vietnamese bơm bánh răng thủy lực đôi CBNT 5/4
Indonesia — Indonesian pompa roda gigi hidrolik tandem CBNT 5/4
French-speaking markets pompe hydraulique double à engrenages CBNT 5/4

Model Identification And OEM Material Numbers

Search family reference: CBNT 5/4. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.

Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.