CBN-E500 Hydraulic Gear Pumps 20–63 Cc With Square Mounting Flange

1 / 3
Item Specification
Manufacturer Olive Branch Hydraulics
Series CBN-E500 single external gear pump
Displacements 20, 25, 32, 40, 50 and 63 cm³/rev
Rated pressure reference 16 MPa / 160 bar
Maximum pressure reference 20 MPa / 200 bar; final duty limit confirmed per supplied execution
Speed reference Rated 2,000 rpm; maximum 2,500 rpm
Rotation reference Left-hand catalogue execution; confirm the arrow and shaft-end viewing direction
Mounting Square four-hole flange; confirm mounting centres, pilot and flange thickness
Shaft Splined drive shown; confirm tooth count, profile, diameter and engagement length
Oil connections Side oil-port faces; confirm inlet/outlet positions and connection dimensions
Application Agricultural auxiliary hydraulics and hydraulic power units, subject to verified fitment
OEM/material number Confirmed from the original pump identification, machine reference and approved drawing
Product Information

CBN-E500 hydraulic gear pumps for agricultural equipment

Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM projects for agricultural and mobile equipment. This page groups the reviewed CBN-E500 mounting style and six displacement sizes so that distributors can compare models and drive requirements within one product family.

The approved reference images show the overall pump, the shaft and side connection face, and the front mounting flange. Use these views to identify the body style before confirming a supply specification. Body length and drive execution can vary with the required pump size.

Six model sizes in one product group

Model Nominal displacement cm³/rev
CBN-E520 20
CBN-E525 25
CBN-E532 32
CBN-E540 40
CBN-E550 50
CBN-E563 63

The operating references for this catalogue group are listed in the specification table above. Maximum pressure is not a continuous-duty permission. Confirm operating pressure, speed, oil viscosity, temperature and expected duty with the enquiry so that the selected execution can be assessed.

Model names and search spellings

Catalogue model Spacing / punctuation enquiry forms Displacement cm³/rev
CBN-E520 CBNE520; CBN E520; CBN E 520 20
CBN-E525 CBNE525; CBN E525; CBN E 525 25
CBN-E532 CBNE532; CBN E532; CBN E 532 32
CBN-E540 CBNE540; CBN E540; CBN E 540 40
CBN-E550 CBNE550; CBN E550; CBN E 550 50
CBN-E563 CBNE563; CBN E563; CBN E 563 63

These punctuation and spacing variants help identify a model enquiry; they are not additional certified part numbers. Series searches may use CBN-E500, CBNE500, CBN E500, CBN500 or CBN-500. Preserve the complete pressure letter and all suffixes from the original marking when ordering.

Chinese descriptions include CBN-E500齿轮泵、CBN500液压油泵、CBN-E5系列齿轮泵、方形法兰花键轴齿轮泵 and 农机液压齿轮泵. English enquiry terms include CBN-E500 hydraulic gear pump, CBN500 external gear pump, square-flange hydraulic oil pump, splined-shaft gear pump and agricultural auxiliary hydraulic pump.

The CBN-E prefix must be retained when confirming the exact assembly. A pump carrying another pressure-class letter or a different series designation requires its own technical comparison.

Different shafts within the same body-style page

The confirmed images show a splined shaft. Send the tooth count, major and minor diameters, tooth profile, engagement length and mating coupling details. Splined shaft, spline drive and 花键轴 are enquiry terms for the drive connection, but none of them establishes the exact spline dimensions.

Plain key shaft, keyed cylindrical shaft, flat-end shaft or other drive enquiries can be evaluated from a sample or complete drawing. Confirmed shaft executions for this body style remain within this product group. For a keyed connection, include shaft diameter, projection and key dimensions; for a flat end, include the flat thickness and coupling engagement dimensions.

Installation and equipment identification

Measure the mounting pilot, bolt-hole centres, flange thickness and clearance around the installed pump. Record the connection dimensions and position of both hydraulic lines. Rotation must be checked using the original arrow and the correct viewing direction from the shaft end.

Potential enquiries include tractor and harvester auxiliary circuits and agricultural hydraulic power units. A machine model or OEM material number is assigned only after checking the original pump identification and installation data. Send photographs of the existing unit from the shaft end, port faces and rear cover together with its full marking.

Manufacturing and quotation

For OEM/ODM development, supply an original sample or a complete dimensional drawing and the required quantity. We will evaluate the housing, mounting, drive, oil connections and sealing arrangement before agreeing the technical specification, inspection scope, identification and packing.

The three reference images illustrate the approved body style and pictured drive configuration. They are not separate photographs of all six model sizes. The final order drawing and agreed performance specification define the supplied pump.

Frequently asked questions

Are CBN-E520 and CBN-E563 the same displacement?

No. Select the required size from the model table, then confirm its installation dimensions and drive connection.

Can I order different shaft versions together?

Yes, subject to technical confirmation. List the required quantity and drive dimensions for each execution within this product group.

What is needed for a quotation?

Send the complete pump marking, equipment model, clear photographs, dimensions, operating requirements and quantity. Olive Branch Hydraulics will confirm the proposed configuration and production requirements.

International Search Terms

These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.

Market / language Product search phrases
English — international buyers CBN-E500 hydraulic gear pump; CBN-E500 gear oil pump
Russia / Kazakhstan — Russian CBN-E500 шестеренный насос; CBN-E500 гидравлический насос
Mexico / Nicaragua / Latin America — Spanish bomba hidráulica de engranajes CBN-E500; bomba CBN-E500
Egypt / Iraq / Arabic-speaking markets مضخة تروس هيدروليكية CBN-E500
Türkiye — Turkish CBN-E500 hidrolik dişli pompa; CBN-E500 dişli pompa
Brazil — Portuguese bomba hidráulica de engrenagens CBN-E500
Vietnam — Vietnamese bơm bánh răng thủy lực CBN-E500
Indonesia — Indonesian pompa roda gigi hidrolik CBN-E500
French-speaking markets pompe hydraulique à engrenages CBN-E500

Model Identification And OEM Material Numbers

Search family reference: CBN-E500. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.

Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.