5 Common Symptoms of Hydraulic Gear Pump Problems
Spot the 5 early warning signs of hydraulic gear pump failure. Prevent costly downtime with expert troubleshoo…
| Model | Front / rear displacement (mL/rev) | Minimum volumetric efficiency, front/rear (%) | L1 / L2 / L (mm) | Weight (kg) |
|---|---|---|---|---|
| CBHY-G36/F3.5-ATΦ13* | 36 / 3.5 | 92 / 85 | 123 / 123 / 205 | 6.8 |
| CBHY-G36/F4.5-ATΦ13* | 36 / 4.5 | 92 / 90 | 123 / 123 / 208 | 7 |
| CBHY-G32/F3.5-ATΦ13* | 32 / 3.5 | 92 / 85 | 118 / 118 / 200 | 6.5 |
| CBHY-G32/F4.5-ATΦ13* | 32 / 4.5 | 92 / 90 | 118 / 118 / 203 | 6.7 |
| CBHY-G30/F3.5-ATΦ13* | 30 / 3.5 | 92 / 85 | 116 / 116 / 198 | 6.1 |
| CBHY-G30/F4.5-ATΦ13* | 30 / 4.5 | 92 / 90 | 116 / 116 / 201 | 6.4 |
| CBHY-G28/F3.5-ATΦ13* | 28 / 3.5 | 92 / 85 | 114 / 114 / 196 | 6.1 |
| CBHY-G28/F4.5-ATΦ13* | 28 / 4.5 | 92 / 90 | 114 / 114 / 199 | 6.2 |
| CBHY-G25/F3.5-ATΦ13* | 25 / 3.5 | 92 / 85 | 110 / 110 / 192 | 5.8 |
| CBHY-G25/F4.5-ATΦ13* | 25 / 4.5 | 92 / 90 | 110 / 110 / 195 | 5.9 |
Front / rear rated pressure: 25 / 20 MPa. Front / rear maximum pressure: 28 / 25 MPa. Preferred speed: 1500–2500 rpm. Published operating range: 800–3000 rpm.
| Interface | Drawing reference |
|---|---|
| Construction | Cast iron front pumping-section body and aluminium-alloy rear housing; common inlet with separate outputs |
| Mounting | A oval flange; Ø82 mm pilot; 106 mm mounting-slot centres; two 11 mm open slots; overall flange width 130 mm |
| Drive shaft | SAE 13-tooth spline; 16/32 diametral pitch; 30° pressure angle; major Ø21.8 mm; minor Ø18.63 mm; projection 42 mm; spline length 32 mm |
| Common inlet | Ø32 mm passage; 58.7 × 30.2 mm flange pattern; four M10 × 1.25 threads, depth 15 mm, as drawn |
| Separate outlets | Two G1/2 threaded outlets, depth 16 mm. Additional section detail includes a G3/4 thread reference; confirm its exact position and execution from the original drawing. |
| Rotation | L: counterclockwise; clockwise suffix omitted in catalogue. Confirm direction viewed from the shaft end. |
L1, L2 and L are catalogue references in millimetres. The source table lists identical L1 and L2 values for each displacement pair; these values are retained for identification and require confirmation against the final production drawing. Confirm the selected oil-port execution and shaft tolerances before manufacture.
Olive Branch Hydraulics offers manufacturing and OEM/ODM support for the CBHY oval-flange tandem gear pump family. This page groups ten documented displacement pairs in one body family. Front sections of 25, 28, 30, 32 and 36 mL/rev are each paired with a 3.5 or 4.5 mL/rev rear section. The drawing shows a common inlet and separate hydraulic outputs.
The complete model list is CBHY-G25/F3.5, CBHY-G25/F4.5, CBHY-G28/F3.5, CBHY-G28/F4.5, CBHY-G30/F3.5, CBHY-G30/F4.5, CBHY-G32/F3.5, CBHY-G32/F4.5, CBHY-G36/F3.5 and CBHY-G36/F4.5. The catalogue suffix is ATΦ13 followed by a configuration-dependent rotation position. The spline symbol may appear as Φ, Ø or 0 in text, including AT013. Confirm the complete nameplate model rather than selecting by typography alone.
Common descriptions include CBHY tandem gear pump, common-inlet double hydraulic pump, cast iron and aluminium tandem pump, oval-flange hydraulic gear pump and 13-tooth spline tandem pump. The documented shaft is SAE 13-tooth, 16/32 diametral pitch and 30° pressure angle. Other shaft executions are not listed here as verified standard catalogue options.
The front G section is rated at 25 MPa with 28 MPa maximum pressure. The rear F section is rated at 20 MPa with 25 MPa maximum. Catalogue minimum volumetric efficiency is 92% for the front section, 85% for the 3.5 mL/rev rear section and 90% for the 4.5 mL/rev rear section. These section-specific values must remain separate.
The front pumping-section body is cast iron and the rear housing is aluminium alloy. Before ordering, check the pilot diameter, mounting-slot centres, spline dimensions, common-inlet interface, outlet threads and rotation. The gallery includes the original installation drawing. Its L1 and L2 references require final production-drawing confirmation because the source table repeats identical values for both.
General catalogue application categories include agricultural machinery, loaders, forklifts, cranes and other mobile hydraulic equipment. No specific tractor, harvester or loader model is verified by these general categories. Identify the original pump using its nameplate, equipment details and measured interfaces.
No equipment-manufacturer OEM material number or machine-specific cross-reference has been verified for these ten displacement pairs. CBHY model codes identify pump configurations and must not be represented as verified OEM material numbers. Send the original part number, equipment brand and model, clear nameplate photographs and required rotation for identification.
Olive Branch Hydraulics is a hydraulic-component manufacturer supporting OEM/ODM projects, sample-based manufacture and tooling development. Provide quantity, displacement pair, pressure, speed and complete interface requirements for review and quotation. Exact replication is evaluated from the physical sample and agreed technical specification. Product photographs illustrate the body style; final details are confirmed in the approved drawing.
These suggested identification phrases cover different languages and markets; they are not measured search-volume or ranking data. Combine the family name with the exact front/rear displacement pair.
| Language / market | Suggested search phrases |
|---|---|
| English | CBHY tandem gear pump; common inlet double hydraulic pump; 13 tooth spline; CBHY-G25 G28 G30 G32 G36 with F3.5 F4.5 |
| Russian — Russia / Kazakhstan | CBHY двухсекционный шестерённый насос; общий вход; вал 13 шлицев; 25 28 30 32 36 см³ |
| Spanish — Nicaragua / Mexico / Latin America | CBHY bomba hidráulica doble de engranajes; entrada común; eje de 13 dientes; 3.5 o 4.5 cm³ |
| Arabic — Egypt / Iraq | CBHY مضخة تروس هيدروليكية مزدوجة؛ مدخل مشترك؛ عمود 13 سنًا؛ 3.5 أو 4.5 سم³ |
| Turkish | CBHY tandem dişli pompa; ortak emiş; 13 dişli mil; 3.5 veya 4.5 cm³ |
| Portuguese — Brazil | CBHY bomba hidráulica dupla de engrenagens; entrada comum; eixo de 13 dentes; 3.5 ou 4.5 cm³ |
| Vietnamese | CBHY bơm thủy lực bánh răng kép; cửa hút chung; trục then hoa 13 răng; 3.5 hoặc 4.5 cm³ |
| Indonesian | CBHY pompa hidrolik roda gigi tandem; saluran masuk bersama; poros spline 13 gigi; 3.5 atau 4.5 cc |
| French | CBHY pompe hydraulique double à engrenages; aspiration commune; arbre 13 cannelures; 3.5 ou 4.5 cm³ |
Spot the 5 early warning signs of hydraulic gear pump failure. Prevent costly downtime with expert troubleshoo…
Replacing a backhoe tandem gear pump? Test pressure and flow first, then match both sections, rotation, shaft…
Tandem gear pumps deliver independent flow from one shaft. Learn how dual stage gear pumps power complex hydra…
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.