CBHLAH Tandem Gear Pumps 50/20 And 50/40 Cc With Common Inlet

1 / 3

CBHLAH Tandem Gear Pump Specifications

Catalogue model pattern Front/rear displacement (mL/rev) L1 (mm) L2 (mm) L (mm) Weight (kg)
CBHLAH-F550/F520-ALH6f* 50/20 80 223.5 290 16.3
CBHLAH-F550/F540-ALH6f* 50/40 80 235.5 314 17.1

Rated pressure: 20 MPa. Maximum pressure: 25 MPa. Optimum speed: 1500–2500 rpm. Catalogue operating range: 800–3000 rpm. Volumetric efficiency: ≥92%.

A oval mounting: nominal 101.6 mm pilot, 146 mm bolt centres and two 14 mm holes. L screw connections: common inlet M48×2, depth 25 mm; section outlets M33×2, depth 20 mm. H6f rectangular-spline shaft. Rotation is selected separately. The asterisk is a configuration placeholder, not a literal complete part number.

Product Information

CBHLAH Common-Inlet Dual Gear Pump

Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM production, sample-based development and manufacture to approved drawings. The CBHLAH family combines two gear pumping sections with a common inlet arrangement, separate section outlets and an oval two-hole mounting flange.

This product groups the two verified displacement combinations, 50/20 and 50/40 mL per revolution. The overall and side photographs illustrate the selected external body and rectangular-spline shaft. The source photograph marking identifies the 50/40 combination. Photographs are configuration references, not separate proof of every displacement and rotation. The original installation drawing is included in the gallery.

Models And Catalogue Dimensions

Catalogue model pattern Front/rear displacement (mL/rev) L1 (mm) L2 (mm) L (mm) Weight (kg)
CBHLAH-F550/F520-ALH6f* 50/20 80 223.5 290 16.3
CBHLAH-F550/F540-ALH6f* 50/40 80 235.5 314 17.1

Displacement in mL/rev is numerically equal to cc/rev. The first figure identifies the front section and the second the rear section. Catalogue lengths and weights apply to the illustrated configuration. Confirm the complete assembly envelope, shaft and ports on the approved drawing before manufacture or installation.

Alternative Names And Ordering Code

Customer search descriptions include CBHLAH tandem gear pump, CBHLAH twin hydraulic pump, CBHLAH common inlet gear pump, CBHLAH 50/20 pump and CBHLAH 50/40 pump. Base model spellings include CBHLAH-F550/F520 and CBHLAH F550/F520, and CBHLAH-F550/F540 and CBHLAH F550/F540. The full catalogue patterns are listed in the model table.

F denotes the listed 20 MPa pressure grade. The catalogue identifies series 5/5, A oval mounting, L screw connections and H6f rectangular spline. Rotation L is counterclockwise; clockwise R is normally omitted. The final asterisk is an ordering placeholder and must be completed for the confirmed configuration. Abbreviated markings on a photograph must be checked against the actual shaft and rotation rather than treated as a universal suffix equivalence.

No separate machine OEM material number or exact tractor, harvester or loader fitment has been verified for these catalogue configurations. Similar family names from different makers do not establish interchangeability.

Pressure And Speed

The catalogue lists rated pressure of 20 MPa, maximum pressure of 25 MPa, optimum speed of 1500–2500 rpm, operating range of 800–3000 rpm and volumetric efficiency of at least 92%. Maximum pressure is a catalogue limit, not a continuous-duty operating recommendation. Check each circuit pressure, required flow, oil temperature, inlet conditions and combined shaft torque when selecting the pump.

The two sections supply different flows at the same shaft speed. Actual delivered flow depends on displacement, speed, pressure, temperature and internal leakage. The common inlet must be sized for the combined section demand.

Mounting, Shaft And Port Drawing

Interface Original drawing reference
Mounting Oval two-hole flange; nominal 101.6 mm pilot, 146 mm bolt centres and two 14 mm mounting holes
H6f rectangular spline Six-tooth form documented; nominal major diameter 25 mm, minor reference 20 mm and tooth width 5 mm. Drawing tolerances control coupling fit.
Shaft extension 63 mm overall projection reference and 42 mm engagement reference shown; axial M6 thread, 20 mm deep
Common inlet M48×2, depth 25 mm; 65 mm spotface
Section outlets M33×2, depth 20 mm; 50 mm spotfaces

The original diagram identifies the common inlet on the opposite side from the two section outlets. Confirm port orientation, sealing faces, fittings, mounting clearance and coupling engagement against the approved installation drawing. Only the documented rectangular-spline shaft is included for this selected configuration; no keyed or SAE involute option is inferred from another pump.

Agricultural And Mobile Hydraulic Applications

The catalogue describes a high-strength aluminium-alloy housing, axial clearance compensation, radial balancing and self-lubricating bearings. This tandem family can be evaluated for agricultural and mobile machinery requiring two hydraulic flows from one drive shaft. Exact equipment fitment requires the original pump marking, both displacements, pressure and speed requirements, mounting, shaft, ports and rotation.

OEM/ODM Enquiries

Provide the complete nameplate, clear photographs of both port sides, front/rear displacement, required pressures and speeds, shaft measurements, pilot and bolt dimensions, port details and rotation. Olive Branch Hydraulics can evaluate your sample or drawing and confirm a manufacturing specification. An exact new configuration may require a sample and tooling.

Customer search keywords: CBHLAH F550 F520 tandem pump, CBHLAH F550 F540 hydraulic gear pump, common inlet double gear pump, 50 20 cc hydraulic pump, 50 40 cc tandem pump, oval flange H6f spline pump, China agricultural hydraulic pump manufacturer.

International Search Terms

These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.

Market / language Product search phrases
English — international buyers CBHLAH tandem hydraulic gear pump; CBHLAH double gear pump
Russia / Kazakhstan — Russian CBHLAH сдвоенный шестеренный насос; CBHLAH двухсекционный гидравлический насос
Mexico / Nicaragua / Latin America — Spanish bomba hidráulica doble de engranajes CBHLAH; bomba CBHLAH
Egypt / Iraq / Arabic-speaking markets مضخة تروس هيدروليكية مزدوجة CBHLAH
Türkiye — Turkish CBHLAH tandem hidrolik dişli pompa; CBHLAH çift dişli pompa
Brazil — Portuguese bomba hidráulica dupla de engrenagens CBHLAH
Vietnam — Vietnamese bơm bánh răng thủy lực đôi CBHLAH
Indonesia — Indonesian pompa roda gigi hidrolik tandem CBHLAH
French-speaking markets pompe hydraulique double à engrenages CBHLAH

Model Identification And OEM Material Numbers

Search family reference: CBHLAH. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.

Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.

You May Also Like

Related Articles

Can A Gear Pump Be Reversed?

Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.