How Does A Tandem Gear Pump Work?
Tandem gear pumps deliver independent flow from one shaft. Learn how dual stage gear pumps power complex hydra…
| Item | Catalogue / drawing reference |
|---|---|
| Model | CBGJL-F3120/F3120-BF*; catalogue family heading: CBGJL3 |
| Front / rear displacement | 120 / 120 mL/rev |
| Rated / maximum pressure | 20 / 25 MPa |
| Preferred / published speed range | 1200–2300 / 800–2500 rpm |
| Minimum catalogue volumetric efficiency | 92% |
| L1 / L2 / L | 144 / 285 / 366 mm, referenced to installation drawing |
| Reference weight | 50 kg |
| Mounting | B square flange, Ø127 mm pilot; 114.5 × 114.5 mm mounting centres; two Ø14.5 holes and two open slots; flange width 146 mm |
| SAE shaft | 14 teeth; 12/24 diametral pitch; 30° pressure angle; major Ø31.2 mm; minor Ø27 mm; spline length 40 mm; M10 end thread, depth 20 mm |
| Rectangular spline drawing | 8 splines, nominal tooth width 6 mm, major Ø36 mm, minor Ø32 mm; projection 42 mm; M10 end thread, depth 20 mm. Catalogue text calls this H6b, which must be verified against the drawing before ordering. |
| Inlet flanges, both sections | Ø50 mm passage; 77.8 × 42.9 mm pattern; four M12 holes, depth 20 mm on each |
| Outlet flanges, both sections | Ø32 mm passage; 58.7 × 30.2 mm pattern; four M10 holes, depth 18 mm on each |
| Rotation | L: counterclockwise; clockwise suffix omitted in catalogue. Confirm direction viewed from the shaft end. |
Dimensions are catalogue references in millimetres. Confirm the complete production drawing and shaft tolerances before manufacture. The rectangular-shaft designation remains subject to verification; the drawing shows eight splines.
Olive Branch Hydraulics offers manufacturing and OEM/ODM support for the CBGJL3 cast iron tandem pump family. This page covers the documented CBGJL-F3120/F3120 configuration with 120 mL/rev displacement in each section. The two pumping sections share one mechanical drive and provide separate hydraulic outputs. Both documented shaft references are grouped on this page.
The catalogue family heading is CBGJL3. The model table and code diagram use CBGJL-F3120/F3120-BF*. Common descriptive names include CBGJL3 tandem gear pump, CBGJL-F3120/F3120 double gear pump, 120/120 cc dual-section hydraulic pump and cast iron square-flange tandem pump. The final asterisk represents a configuration position, not a literal order suffix. Pressure code F denotes the 20 MPa rated grade; B identifies the square mounting flange, and F in the connection position denotes flange oil ports.
The SAE shaft drawing specifies 14 teeth, 12/24 diametral pitch and a 30° pressure angle. A second drawing shows an eight-tooth rectangular spline with nominal Ø36 mm major and Ø32 mm minor diameters. The catalogue text labels the rectangular option H6b, but that designation does not resolve the drawing's eight-tooth detail. Therefore, H6b is retained only as an unverified catalogue designation, not as confirmation of tooth count or interchangeability. Confirm the original shaft dimensions and approved drawing before ordering.
General application categories include agricultural machinery, loaders, forklifts, cranes and other mobile hydraulic equipment. These categories do not confirm installation on a particular tractor, harvester or loader model. Match the original pump's mounting pilot, bolt pattern, shaft engagement, rotation and flange connections together with the hydraulic circuit requirements.
The reference drawing is included in the gallery. Catalogue lengths and weight refer to the listed configuration. Verify tolerances, port orientation and final production dimensions for the selected shaft execution. Confirm allowable working pressure and duty cycle; maximum pressure is not an unrestricted continuous operating specification.
No equipment-manufacturer OEM material number or machine-specific part-number cross-reference has been verified for this configuration. CBGJL-F3120/F3120 is a pump model designation, not a verified OEM material number. Send clear nameplate photographs, the original part number, equipment brand and model, interface measurements and the required rotation for identification.
The three exterior views are manufacturer-supplied appearance illustrations rather than photographs of delivered production units. The fourth gallery image is the original dimension drawing showing both shaft options. Olive Branch Hydraulics is a hydraulic-component manufacturer supporting OEM/ODM production, sample-based manufacture and tooling development. Provide the quantity, pressure, speed and complete interface specification for technical review and quotation. Exact replication is evaluated from the physical sample and agreed technical requirements.
These suggested identification phrases cover different languages and markets; they are not measured search-volume or ranking data. Combine the series name with the exact 120/120 displacement and confirmed shaft option.
| Language / market | Suggested search phrases |
|---|---|
| English | CBGJL3 tandem gear pump; CBGJL-F3120/F3120; 120/120 cc double hydraulic pump; cast iron tandem pump; 14 tooth spline shaft |
| Russian — Russia / Kazakhstan | CBGJL3 двухсекционный шестерённый насос; гидронасос 120/120 см³; чугунный корпус; вал 14 шлицев |
| Spanish — Nicaragua / Mexico / Latin America | CBGJL3 bomba hidráulica doble de engranajes; 120/120 cm³; cuerpo de hierro fundido; eje de 14 dientes |
| Arabic — Egypt / Iraq | CBGJL3 مضخة تروس هيدروليكية مزدوجة؛ 120/120 سم³؛ جسم من الحديد الزهر؛ عمود 14 سنًا |
| Turkish | CBGJL3 tandem dişli pompa; 120/120 cm³ çift hidrolik pompa; dökme demir gövde; 14 dişli mil |
| Portuguese — Brazil | CBGJL3 bomba hidráulica dupla de engrenagens; 120/120 cm³; corpo de ferro fundido; eixo de 14 dentes |
| Vietnamese | CBGJL3 bơm thủy lực bánh răng kép; 120/120 cm³; thân gang; trục then hoa 14 răng |
| Indonesian | CBGJL3 pompa hidrolik roda gigi tandem; 120/120 cc; bodi besi cor; poros spline 14 gigi |
| French | CBGJL3 pompe hydraulique double à engrenages; 120/120 cm³; corps en fonte; arbre cannelé 14 dents |
Tandem gear pumps deliver independent flow from one shaft. Learn how dual stage gear pumps power complex hydra…
Replacing a backhoe tandem gear pump? Test pressure and flow first, then match both sections, rotation, shaft…
Snowplow motor buying guide for contractors and fleets. Compare hydraulic vs electric, top brands, cold-weathe…
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.