CBGJL Cast Iron Tandem Gear Pumps 80/50–100/63 Cc With 14-Tooth Shaft

1 / 4

CBGJL Technical Specifications

Model Displacement, front/rear (mL/rev) L1 / L2 / L (mm) Weight (kg)
CBGJL-G80/G50-BFΦ14* 80 / 50 110 / 216 / 317 32.1
CBGJL-G80/G63-BFΦ14* 80 / 63 110 / 220 / 325 33.1
CBGJL-G100/G63-BFΦ14* 100 / 63 117.5 / 270 / 337.5 35.1

Rated pressure: 25 MPa; maximum pressure: 28 MPa. Preferred operating speed: 1500–2500 rpm; published speed range: 600–3000 rpm. Minimum catalogue volumetric efficiency: 92%. Confirm allowable continuous duty for the selected operating conditions.

Interface Drawing reference
Mounting B square flange; Ø127 mm pilot; 114.5 × 114.5 mm mounting centres; two Ø14.5 holes and two open mounting slots as drawn
Drive shaft SAE 14-tooth spline; 12/24 diametral pitch; 30° pressure angle; major Ø31.2 mm; minor Ø27 mm; projection 56 mm; spline length 45 mm
Inlet flange patterns Front: Ø50, 77.8 × 42.9 mm, four M12 depth 14. Rear: Ø38, 69.9 × 35.7 mm, four M12 depth 18.
Outlet flange patterns Front: Ø32, 58.7 × 30.2 mm. Rear: Ø25, 52.4 × 26.2 mm. Four M10 depth 18 on each.
Rotation L: counterclockwise; clockwise suffix omitted in catalogue. Confirm direction viewed from the drive shaft before ordering.

Dimensions are catalogue references in millimetres. L1, L2 and L refer to the attached drawing. The published L2 value for the 100/63 configuration is retained as listed and requires confirmation against the production drawing before manufacture.

Product Information

CBGJL Cast Iron Tandem Hydraulic Gear Pumps

Olive Branch Hydraulics offers manufacturing and OEM/ODM support for CBGJL tandem gear pumps. This page groups the same square-flange body style in 80/50, 80/63 and 100/63 mL/rev configurations. The two pumping sections share a mechanical drive and provide separate hydraulic outputs. Select the displacement pair together with the complete mounting, port and shaft dimensions.

The cast iron construction is intended for mobile hydraulic duties. General application categories include agricultural machinery and construction equipment such as loaders, forklifts and cranes. These are application categories, not confirmation of installation on a particular tractor, combine harvester or machine model. Equipment compatibility must be established from the original pump and circuit requirements.

Models, Names And Ordering Codes

Catalogue model names: CBGJL-G80/G50-BFΦ14, CBGJL-G80/G63-BFΦ14 and CBGJL-G100/G63-BFΦ14, with a final rotation suffix where specified. The catalogue may render Φ as Ø or as the numeral 0 in BF014. These are search and typography variants; confirm the complete engraved model before ordering. Common descriptive names include CBGJL tandem gear pump, CBGJL double gear pump, cast iron dual-section hydraulic pump and 14-tooth shaft tandem pump.

Code G identifies the 25 MPa pressure grade; the paired numbers identify front and rear displacement. B identifies the square mounting flange, F the flange oil-port connection and Φ14 the SAE 14-tooth shaft. Only this shaft execution is documented for the present series. Other shaft designs require a separate sample or drawing review and are not listed as verified standard options.

Model Identification And OEM Material Numbers

No machine-manufacturer OEM material number or equipment-specific part-number cross-reference has been verified for these three configurations. CBGJL-G80/G50, CBGJL-G80/G63 and CBGJL-G100/G63 are pump model designations, not verified OEM material numbers. Send a clear nameplate photograph, original part number, equipment brand and model, shaft dimensions and port measurements for identification. Do not select a pump from appearance alone.

Manufacturing And Enquiry Information

As a hydraulic-component manufacturer, Olive Branch Hydraulics supports sample-based production, drawing review, OEM/ODM projects and tooling development. Send the required quantity, displacement pair, working pressure, speed, rotation, mounting pilot, bolt pattern, shaft details and oil-port dimensions. New tooling and exact sample replication are evaluated after reviewing the physical sample and complete technical requirements.

The original reference drawing is included in the image gallery. Confirm all dimensions and the final production specification before ordering, especially the 100/63 model length references. The published maximum pressure is a limit reference and must not be treated as an unrestricted continuous operating pressure. No machine-specific performance or interchangeability is implied without technical verification.

International Product Search Terms

The phrases below help buyers identify the product in different languages. They are suggested product search terms, not measured search-volume or ranking data. Use the exact displacement pair with the series name.

Language / market Suggested search phrases
English CBGJL tandem gear pump; cast iron double hydraulic pump; 80/50 80/63 100/63 cc; 14 tooth spline gear pump
Russian — Russia / Kazakhstan CBGJL тандемный шестерённый насос; чугунный двухсекционный гидронасос; вал 14 шлицев
Spanish — Nicaragua / Mexico / Latin America CBGJL bomba hidráulica doble de engranajes; bomba de hierro fundido; eje estriado de 14 dientes
Arabic — Egypt / Iraq CBGJL مضخة تروس هيدروليكية مزدوجة؛ جسم من الحديد الزهر؛ عمود مسنن 14 سنًا
Turkish CBGJL tandem dişli pompa; dökme demir çift hidrolik pompa; 14 dişli mil
Portuguese — Brazil CBGJL bomba hidráulica dupla de engrenagens; corpo de ferro fundido; eixo estriado de 14 dentes
Vietnamese CBGJL bơm thủy lực bánh răng kép; thân gang; trục then hoa 14 răng
Indonesian CBGJL pompa hidrolik roda gigi tandem; bodi besi cor; poros spline 14 gigi
French CBGJL pompe hydraulique double à engrenages; corps en fonte; arbre cannelé 14 dents

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.