Orbital Motor Shaft Seal Looks Uneven? Check Before Fitting
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
| Model | Displacement (mL/rev) | L1 / L (mm) | Weight (kg) |
|---|---|---|---|
| CBGJE-F3120-BF** | 120 | 140 / 221 | 25.8 |
| CBGJE-F3134-BF** | 134 | 143 / 227 | 27 |
| CBGJE-F3140-BF** | 140 | 144 / 229 | 28 |
| CBGJE-F3152-BF** | 152 | 146 / 234 | 29.1 |
| CBGJE-F3160-BF** | 160 | 150 / 238 | 30 |
Rated pressure: 20 MPa. Maximum pressure: 25 MPa. Preferred speed: 1500–2200 rpm. Published operating range: 600–2500 rpm. Minimum catalogue volumetric efficiency: 92%. Values apply to the listed catalogue configurations; confirm duty conditions before ordering.
| Feature | Drawing reference |
|---|---|
| Body and mounting | Cast iron; B square flange; Ø125 mm pilot; 115 × 115 mm mounting-hole centres; four Ø14 holes; flange width 146 mm. |
| SAE spline option | 14 teeth; 12/24 diametral pitch; 30° pressure angle; major Ø31.2 mm; minor Ø27 mm; spline length 40 mm; M10 threaded shaft end, depth 25 mm. |
| H8b rectangle spline option | 8 splines; major Ø36 mm; minor Ø32 mm; nominal tooth width 6 mm; projection 42 mm; M10 threaded end, depth 25 mm. See original drawing for fits and tolerances. |
| Inlet flange | Ø50 mm passage; 77.8 × 42.9 mm bolt pattern; four M12 holes, depth 20 mm. |
| Outlet flange | Ø32 mm passage; 58.7 × 30.2 mm bolt pattern; four M10 holes, depth 20 mm. |
| Rotation | L: counterclockwise; clockwise suffix omitted in catalogue. Confirm direction viewed from the shaft end. |
L1 and L refer to the attached installation drawing. Dimensions are in millimetres. Catalogue overview stroke/length references must be checked against the selected shaft execution and final production drawing.
Olive Branch Hydraulics offers manufacturing and OEM/ODM support for the CBGJE3 square-flange gear pump family. The same body style is grouped here in five displacements: 120, 134, 140, 152 and 160 mL/rev. Two documented drive-shaft options are included on this page: H8b rectangular spline and SAE 14-tooth spline. The selected shaft, rotation and oil-port interfaces must be confirmed as a complete configuration.
The catalogue family heading is CBGJE3, while the individual models are written CBGJE-F3120-BF**, CBGJE-F3134-BF**, CBGJE-F3140-BF**, CBGJE-F3152-BF** and CBGJE-F3160-BF**. The asterisks indicate configuration positions and are not literal order suffixes. Common product descriptions include CBGJE3 gear pump, CBGJE-F3 series hydraulic gear pump, cast iron external gear pump and large-displacement square-flange hydraulic pump.
Pressure code F denotes the 20 MPa rated grade. B identifies the square mounting flange, and F in the connection position identifies flange oil ports. H8b denotes the rectangular spline execution; the SAE option is identified by its spline specification. Different text renderings of the spline symbol, such as Φ and Ø, should be checked against the nameplate and drawing. No additional unverified shaft types are presented as standard catalogue options.
The pump family is used for mobile hydraulic applications. General catalogue application categories include agricultural machinery, loaders, forklifts, cranes and other construction machinery. These categories do not establish fitment to a specific tractor, harvester, loader or engine. Verify the original pump model, pilot diameter, mounting centres, shaft engagement, rotation and flange connections before selecting a configuration.
The technical table and original drawing provide reference dimensions for identification. Catalogue weights and body lengths are configuration references. Confirm the approved production drawing before manufacture, particularly shaft projection, spline fit, threaded-end depth and port orientation. Maximum pressure must be considered together with the required duty cycle, operating speed and circuit protection settings.
No equipment-manufacturer OEM material number or machine-specific part-number cross-reference has been verified for these five models. The CBGJE-F3 numbers listed here identify pump models and must not be represented as verified OEM material numbers. For identification, provide the original part number, clear nameplate photographs, equipment brand and model, measurements and required rotation.
The two external views in the gallery are manufacturer-supplied appearance illustrations, not photographs of delivered production units. The third image is the original installation drawing showing both shaft options. These views support product identification; final dimensions and manufactured appearance are confirmed in the agreed specification.
Olive Branch Hydraulics is a hydraulic-component manufacturer supporting OEM/ODM projects, sample-based manufacture and tooling development. Send your quantity, target displacement, pressure, speed and complete interface requirements for review. Exact sample replication is assessed using the physical sample and technical requirements. Contact our team for configuration confirmation and a production quotation.
These are suggested product identification phrases for different languages and markets, not measured search-volume or ranking data. Combine the family name with the exact model, displacement and shaft option.
| Language / market | Suggested search phrases |
|---|---|
| English | CBGJE3 hydraulic gear pump; CBGJE-F3120 F3134 F3140 F3152 F3160; cast iron gear pump 120 134 140 152 160 cc; 14 tooth spline pump; H8b shaft |
| Russian — Russia / Kazakhstan | CBGJE3 шестерённый гидронасос; чугунный насос 120–160 см³; вал 14 шлицев; вал H8b |
| Spanish — Nicaragua / Mexico / Latin America | CBGJE3 bomba hidráulica de engranajes; cuerpo de hierro fundido; 120–160 cm³; eje de 14 dientes; eje H8b |
| Arabic — Egypt / Iraq | CBGJE3 مضخة تروس هيدروليكية؛ جسم من الحديد الزهر؛ سعة 120–160 سم³؛ عمود 14 سنًا؛ H8b |
| Turkish | CBGJE3 hidrolik dişli pompa; dökme demir gövde; 120–160 cm³; 14 dişli mil; H8b mil |
| Portuguese — Brazil | CBGJE3 bomba hidráulica de engrenagens; corpo de ferro fundido; 120–160 cm³; eixo de 14 dentes; eixo H8b |
| Vietnamese | CBGJE3 bơm thủy lực bánh răng; thân gang; 120–160 cm³; trục then hoa 14 răng; trục H8b |
| Indonesian | CBGJE3 pompa hidrolik roda gigi; bodi besi cor; 120–160 cc; poros spline 14 gigi; poros H8b |
| French | CBGJE3 pompe hydraulique à engrenages; corps en fonte; 120–160 cm³; arbre cannelé 14 dents; arbre H8b |
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Snowplow motor buying guide for contractors and fleets. Compare hydraulic vs electric, top brands, cold-weathe…
Vane pump vs gear pump: Compare efficiency, noise, cost & applications to find the best hydraulic pump for you…
Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.