CBGJ4 Cast Iron Gear Pumps 180–200 Cc With Square Flange

1 / 4

CBGJ4 Technical Specifications

Model Displacement (mL/rev) Rated / maximum pressure (MPa) L1 / L (mm) Weight (kg)
CBGJ-4180-BF** 180 17.5 / 22.5 173.5 / 267 33.7
CBGJ-4190-BF** 190 14 / 17.5 176.5 / 270 34.5
CBGJ-4200-BF** 200 14 / 17.5 179.5 / 273 35

Preferred speed: 1500–2200 rpm; published operating range: 800–2500 rpm. Minimum catalogue volumetric efficiency: 92%. Pressure ratings differ by model; do not apply the 180 cc pressure rating to the 190 or 200 cc configurations.

Interface Original drawing reference
Mounting B square flange; Ø127 mm pilot; 114.5 × 114.5 mm hole centres; four Ø14.5 mounting holes; flange width 146 mm
SAE spline shaft reference 14 teeth; 12/24 diametral pitch; 30° pressure angle; major Ø31.2 mm; minor Ø27 mm; projection 56 mm; spline length 42 mm
H8b rectangular spline reference 8 teeth; nominal tooth width 6 mm; major Ø36 mm; minor Ø32 mm; projection 60 mm; M10 threaded end, depth 25 mm. Confirm all fits against the original drawing.
Inlet flange Ø50 mm passage; 77.8 × 42.9 mm pattern; M12 threads, depth 20 mm, as drawn
Outlet flange Ø38 mm passage; 69.9 × 35.7 mm pattern; M12 threads, depth 20 mm, as drawn
Rotation L: counterclockwise; clockwise suffix omitted in catalogue. Confirm direction viewed from the shaft end.

Photo identification: the supplier photographs show a smooth external shaft surface. They do not verify a 14-tooth or eight-tooth shaft on the pictured sample. The spline specifications above are separate catalogue drawing references. Confirm the exact shaft execution and complete production drawing before ordering.

Product Information

CBGJ4 Large-Displacement Cast Iron Gear Pumps

Olive Branch Hydraulics offers manufacturing and OEM/ODM support for CBGJ4 square-flange gear pumps. This page groups the same body family in 180, 190 and 200 mL/rev sizes. Select the exact model together with the required pressure, shaft interface, rotation and oil-port connection.

Models, Names And Pressure Ratings

The documented catalogue models are CBGJ-4180-BF**, CBGJ-4190-BF** and CBGJ-4200-BF**. Search-name variations include CBGJ4, CBG J4, CBGJ-4 series, CBGJ 4180, CBGJ 4190 and CBGJ 4200 gear pump. Spaces and hyphens are text variations; verify the complete original model before placing an order. The asterisks represent configuration positions and are not literal order suffixes.

CBGJ-4180 is listed at 17.5 MPa rated and 22.5 MPa maximum pressure. CBGJ-4190 and CBGJ-4200 are listed at 14 MPa rated and 17.5 MPa maximum. These ratings must remain separate. Maximum pressure is not an unrestricted continuous working specification; confirm the required duty cycle, operating speed and circuit protection.

Product Photographs And Shaft Drawing References

The gallery includes three supplier product photographs, with manufacturer markings removed where present, and the original installation drawing. The photographs show a smooth external shaft surface. They do not establish that the pictured sample has either of the spline executions shown in the drawing, and no plain-shaft dimensions or pressure rating are assigned to that sample from appearance alone.

The separate drawing lists an SAE 14-tooth spline and an H8b rectangular eight-tooth spline. These catalogue options are grouped on this page as drawing references. They must not be described as photographed shaft variants. Confirm the shaft tooth count, major and minor diameters, engagement length, end thread and coupling fit from a production drawing or physical sample before ordering.

Application And Installation Review

General catalogue application categories include agricultural machinery, loaders, forklifts, cranes and other mobile hydraulic equipment. No specific tractor, harvester, loader or engine model has been verified for this configuration. Check the original pump nameplate, mounting pilot, bolt centres, shaft dimensions, port patterns and rotation together with the hydraulic circuit requirements.

Catalogue dimensions and weights in the specification table refer to the listed models. L1 and L are defined in the attached drawing. Confirm the final configuration and approved production drawing before manufacture rather than selecting a pump solely from its external appearance.

Model Identification And OEM Material Numbers

No equipment-manufacturer OEM material number or machine-specific cross-reference has been verified for these three models. CBGJ-4180, CBGJ-4190 and CBGJ-4200 are pump model designations, not verified OEM material numbers. Send clear nameplate photographs, the original part number, equipment brand and model, interface measurements and required rotation for identification.

Manufacturing Support

Olive Branch Hydraulics is a hydraulic-component manufacturer supporting OEM/ODM production, sample-based manufacture and tooling development. Provide quantity, displacement, pressure, speed and complete interface requirements for technical review and quotation. Exact sample replication is evaluated using the physical sample and agreed technical specification.

International Product Search Terms

These suggested identification phrases cover different languages and markets. They are not measured search-volume or ranking data. Combine the family name with the exact displacement and confirmed configuration.

Language / market Suggested search phrases
English CBGJ4 hydraulic gear pump; CBGJ-4180 CBGJ-4190 CBGJ-4200; cast iron gear pump 180 190 200 cc; square flange gear pump; H8b shaft drawing; SAE 14 tooth shaft drawing
Russian — Russia / Kazakhstan CBGJ4 шестерённый гидронасос; чугунный насос 180 190 200 см³; квадратный фланец; чертёж вала H8b
Spanish — Nicaragua / Mexico / Latin America CBGJ4 bomba hidráulica de engranajes; hierro fundido; 180 190 200 cm³; brida cuadrada; plano de eje H8b
Arabic — Egypt / Iraq CBGJ4 مضخة تروس هيدروليكية؛ جسم من الحديد الزهر؛ 180 190 200 سم³؛ فلنجة مربعة؛ رسم عمود H8b
Turkish CBGJ4 hidrolik dişli pompa; dökme demir gövde; 180 190 200 cm³; kare flanş; H8b mil çizimi
Portuguese — Brazil CBGJ4 bomba hidráulica de engrenagens; ferro fundido; 180 190 200 cm³; flange quadrada; desenho do eixo H8b
Vietnamese CBGJ4 bơm thủy lực bánh răng; thân gang; 180 190 200 cm³; mặt bích vuông; bản vẽ trục H8b
Indonesian CBGJ4 pompa hidrolik roda gigi; bodi besi cor; 180 190 200 cc; flensa persegi; gambar poros H8b
French CBGJ4 pompe hydraulique à engrenages; corps en fonte; 180 190 200 cm³; bride carrée; plan arbre H8b

You May Also Like

Related Articles

Can A Gear Pump Be Reversed?

Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.