3597706M91 3774612M91 Hydraulic Gear Pump For Massey Ferguson Tractors

Item Catalogue reference and verification
Part references 3595202M91, 3597692M91, 3597706M1, 3597706M91, 3774612V91, 3701005M91, 3774612M91
Equipment Selected MF 362, 365, 375, 383 and 390 tractors. Tandem assembly. Verify by model suffix and serial number.
Interface Confirm shaft profile, mounting pilot, bolt pattern, port dimensions and rotation from the original pump or approved drawing.
Development Dedicated tooling required. One-time tooling fee paid upfront and refunded in full at the agreed cumulative purchase quantity.
Warranty One year. Coverage is detailed in the written quotation.
Product Information

3597706M91 3774612M91 Hydraulic Gear Pump for Massey Ferguson Tractors

Tandem Gear Pump

The 3597706M91 3774612M91 hydraulic gear pump is a tandem assembly for selected MF 362, 365, 375, 383 and 390 tractors. We build it only to a drawing you have confirmed.

The most expensive mistake with this pump is ordering it from a part number and a photo alone. Tandem gear pumps on these tractor series can look alike from the outside and still differ in section order, port orientation, shaft or flange details. A unit that bolts on but does not suit the hydraulic circuit usually comes back as a return. The fix is to match the configuration against a confirmed drawing before any production tooling is cut.

Production runs on dedicated tooling. You pay a one-time tooling fee, and it is refunded in full once your cumulative orders of this model reach a quantity agreed in writing. Each pump carries a one-year warranty under written terms. Goods are supplied EXW Hebei, China.

3597706M91 / 3774612M91 Tandem Gear Pump: Matching the Right Unit to MF 362, 365, 375, 383 and 390

The two reference numbers 3597706M91 and 3774612M91 identify a tandem hydraulic gear pump used on selected MF 362, 365, 375, 383 and 390 tractors. Within those models, build year and installed equipment can change which pump configuration is fitted. For that reason, a reference number is a starting point and does not settle the specification on its own. Olive Branch Hydraulics manufactures this pump in Hebei to the configuration recorded on a drawing approved by the customer.

Product photos on this page are for identification only. They help you recognise the assembly, but they do not define displacement, rotation, port threads or section arrangement. Those values are taken from your confirmed drawing or sample and written into the quotation. Distributors in Spanish-speaking markets often list this part as a bomba hidráulica de engranajes. French catalogues use pompe hydraulique à engrenages, Russian listings use шестерённый гидронасос, and Arabic listings use مضخة تروس هيدروليكية. In every language, the same drawing-based check applies.

What to Send Us to Confirm Your Massey Ferguson Pump Configuration

Four inputs decide how accurately the pump can be matched.

Drawing

A dimensioned drawing fixes the flange, shaft and port geometry directly. It is the most reliable basis, and it becomes the reference document for tooling.

Original sample or clear photos

A physical sample can be measured, and section order and casting details can be verified on it. Photos work when they show the flange, shaft end, ports and nameplate from several angles.

Tractor model and serial information

The model, together with the serial or build data, narrows down which configuration was originally fitted. This matters because the same model range has used more than one variant.

Front/rear section and port details

Describe which section is front and which is rear, and how each port connects to the circuit. In a tandem unit, a reversed section or a misread port is the most common matching error.

Dedicated Tooling for This Tandem Gear Pump: One-Time Fee and Full Refund Terms

How the tooling fee works

This pump needs its own production tooling before the first batch can be made. After you receive the written quotation, you pay a one-time tooling fee upfront. The quotation also states the cumulative order quantity at which the fee is refunded. Every order you place for this same model counts toward that quantity. When the agreed total is reached, the full tooling fee is returned.

Why it suits distributors

For distributors, the fee works more like a deposit than a sunk cost. Repeat orders for the same model reduce the outstanding balance until it is fully cleared. You can therefore spread volume across several orders instead of committing to one large first purchase. Pricing for each order is set in the quotation according to its quantity, which leaves room to plan your resale margin.

Why it suits OEM programmes

OEM customers get tooling built to their approved drawing. Every later batch runs from that same tooling, so dimensions stay consistent from one order to the next. The refund threshold is fixed in writing at the start, so the cost picture is clear before the first sample is made.

The tooling fee and the refund quantity are both set in the written quotation before any payment is made.

From Drawing Approval to Repeat Production Orders

Each stage has a defined input and a written output. Lead times for every stage are confirmed in the written quotation.

Submit data and confirm drawing

You send the drawing, sample or photos, plus tractor details. We return a drawing for your approval, which becomes the reference for tooling and inspection.

Written quotation

This document states the unit pricing by quantity, the tooling fee, the refund quantity, the warranty terms and the EXW terms.

Tooling fee payment

You pay the one-time tooling fee, and dedicated tooling work begins.

Tooling and sample approval

Samples made from the new tooling are checked against the approved drawing. You approve them before batch production starts.

Batch production

Orders are produced from the approved tooling and inspected against the drawing before dispatch.

Cumulative count to refund

Quantities from each order are added to a running total. The full tooling fee is refunded once the agreed quantity is reached.

Consistent Quality Across Every Batch of MF Hydraulic Gear Pumps

Quality checks are tied to the drawing you approved, not to a general catalogue specification.

Configuration check against the approved drawing

Section order, port positions and mounting interfaces are verified against the approved drawing. Any deviation is resolved before the batch ships, not after it arrives.

Same tooling for every batch

Repeat orders run on the dedicated tooling approved at the sample stage. Consistency between batches therefore depends on that tooling, and any drawing revision needs a new approval.

Inspection before dispatch

Pumps are inspected before they leave the factory. The inspection items can be listed in the quotation if you need them for your own incoming checks.

One-year warranty

Every pump is covered for one year. Coverage scope and claim procedure are set out in the written warranty terms.

White-Label and Custom Packaging for Distributors

These options apply to branded and resale programmes.

Private label

Your brand marking can be applied in place of ours.

Custom packaging

Box printing and labelling follow your artwork.

Volume-based pricing

Unit prices are quoted by order quantity in the written quotation.

EXW Hebei, China

Goods are handed over at our facility in Hebei.

Built to order

Pumps are produced against confirmed orders rather than supplied from stock.

Buying Questions on the 3597706M91 3774612M91 Gear Pump

What is the MOQ and lead time?
Both are stated in the written quotation. They depend on your confirmed configuration and order quantity, and they are fixed before tooling begins.
When is the tooling fee refunded?
The fee is refunded in full once cumulative orders of this model reach the quantity agreed in writing. Every order for the same model counts toward that total.
What does the one-year warranty cover?
Coverage follows the written warranty terms issued with your quotation. Those terms define the scope and the claim process.
Can you develop the pump from my sample?
Yes. We measure the sample, prepare a drawing for your approval and build the tooling from that approved drawing.
What trade terms apply?
Goods are supplied EXW Hebei, China. Payment terms are confirmed in the written quotation.

Request a Written Quotation for Your MF Tandem Pump

Send us your drawing, sample photos or tractor model and serial details, along with your estimated annual quantity. We will reply with a written quotation covering unit pricing by quantity, the tooling fee and the cumulative quantity at which that fee is fully refunded.

Drawing, sample or clear photos

Tractor model and serial information

Estimated order quantity

Send Drawing for Quotation

Tooling, Pricing & Warranty

This model requires dedicated tooling before production. We first review your original pump sample or approved drawing to confirm the mounting interface, drive and ports.

Before development begins, we confirm the one-time tooling fee and the qualifying purchase quantity in writing. The tooling fee is paid upfront. We refund it in full once cumulative purchases of this model reach the agreed quantity. Multiple orders for this model can count towards that total.

Olive Branch Hydraulics offers competitive pricing, consistent product quality and a one-year warranty. We quote against the confirmed specification and order quantity. Warranty coverage and the tooling refund terms are stated in the written quotation.

Catalogue and fitment references

3595202M91, 3597692M91, 3597706M1, 3597706M91, 3774612V91, 3701005M91, 3774612M91

Selected MF 362, 365, 375, 383 and 390 tractors. Tandem assembly. The photo shows a reference configuration for identification.

View the catalogue reference

Regional search terms: bomba hidráulica de engranajes 3597706M91 3774612M91, pompe hydraulique à engrenages 3597706M91 3774612M91, шестерённый гидронасос 3597706M91 3774612M91, مضخة تروس هيدروليكية 3597706M91 3774612M91.

Sparex S.42143 reference dimensions: overall length 180.7 mm, rear inlet fixing-hole spacing 39.7 mm, and M8 fixing threads. Before ordering, compare the mounting flange, shaft and port layout with your original pump. Source: https://us.sparex.com/tandem-hydraulic-pump-42143.html

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.