332/F9030 OEM-Quality Tandem Hydraulic Gear Pump For JCB

1 / 4
Parameter Specification
Catalogue references 332/F9030, 20/925580, 332/G7135, 7029120048, 7029120025
Pump type Two-section tandem external gear pump
Drive shaft SAE B-B, 15 teeth, 1 in nominal, 16/32 DP. Nominal shaft projection 46.0 mm.
Mounting SAE B two-bolt flange. Nominal pilot Ø101.6 mm, bolt centres 146.0 mm, 2 × Ø14.3 mm holes.
Application JCB 3CX / 4CX main pump enquiries; confirm by PIN and drawing
Displacement (front / rear) 36 / 29 cm³/rev
Rotation Clockwise (CW), viewed from the shaft end
Suction inlet Single 2 in SAE four-bolt flange
Outlet threads (front / rear) 1-1/16–12 UN / 7/8–14 UNF
Fit verification PIN, shaft, flange, ports, rotation
Customization Shaft, flange, ports, logo, packaging
MOQ Confirmed on quotation
Lead time Confirmed on quotation
Trade term EXW Hebei, China
Supplier brand / quality Olive Branch Hydraulics; original-equipment quality (原厂原装品质)
Product Information

Product Overview: 332/F9030 Tandem Gear Pump

Olive Branch Hydraulics manufactures the 332/F9030 hydraulic pump, a two-section tandem gear pump built to original-equipment quality (原厂原装品质). It is offered for JCB 3CX and 4CX main hydraulic pump enquiries, subject to machine and interface verification. The 36/29 cm³/rev build is listed under JCB references 332/F9030, 20/925580 and 332/G7135. The catalogue lists 7029120048 and 7029120025 as Parker references.

A shared catalogue row does not guarantee fit without checks. Before we quote, we confirm each pump against your machine PIN and the interface drawing: shaft, flange, ports and rotation.

Buyers also search this part as 332F9030, 332-F9030, 20925580 and 20-925580. Spanish, French and Russian searches include bomba hidráulica 332/F9030, pompe hydraulique 332/F9030 and гидронасос 332/F9030.

We are a gear pump manufacturer in Hebei, China. All prices are quoted EXW Hebei.

Key Features

The catalogue photos show a two-section pump, splined shaft and two-hole flange. These interface features guide the selection checks.

Two-section tandem layout: both gear sections run on one drive input. On backhoe loaders, the sections usually feed separate circuits or combine their flow.

Splined drive shaft: we check spline count, major diameter and engagement length against your drawing or a returned sample before production.

2-hole mounting flange: we match pilot diameter, bolt spacing and flange thickness to the confirmed interface drawing.

Inlet and outlet ports: one shared 2 in SAE flange inlet feeds both sections. The front and rear outlet threads are listed in the specifications above.

Rotation: clockwise when viewed from the shaft end for the standard 332/F9030. We verify the rotation marking before assembly.

External gear construction: gear pumps like this one typically use pressure-loaded bushings or side plates. The exact internal build is listed on the order drawing.

We can also build custom shafts, flanges and ports. This suits fleets that run mixed machine builds.

Technical Specifications and Fit Verification

For this pump, matching the interface matters more than any single performance figure. We release a configuration for production only after the four checks below are confirmed.

Parameter What we verify What to send
Machine identity Model (3CX / 4CX) and build range Full machine PIN, nameplate photo
Section displacement Front and rear section sizes Old pump nameplate or measured data
Shaft and flange Spline profile, 2-hole flange pilot and bolt spacing Interface drawing or shaft/flange photos with a scale
Ports and rotation Port threads, positions, rotation direction Port photos, rotation viewed from the shaft end

The standard 332/F9030 displaces 36 cm³/rev at the front section and 29 cm³/rev at the rear. The table above lists its nominal installation dimensions. The supplied pump’s pressure and speed limits are confirmed on the approved build sheet.

See the H3 mounting flange and E1 drive shaft drawings in the Parker PGP/PGM 600 catalogue.

Why Choose Olive Branch Hydraulics

Every order is built to a drawing you approve, and checked against it before it leaves the factory. The table below shows how this works for each type of buyer.

Buyer type What we offer Order basis
Wholesalers and distributors Tiered pricing by quantity, configuration checks across the requested references Price tiers stated on the quotation
OEM/ODM buyers Drawing or sample matching, custom shafts, flanges and ports Requirement → sample → approval → batch production → delivery
Private label buyers White-label pumps, custom logo, labels and cartons MOQ agreed per configuration
Fleet and project buyers Small-batch trial before volume orders, staged shipments Quantities and schedule set on the proforma invoice

Every order gets a pre-shipment inspection. The check items are agreed with you before production.

Our documents cover only what was actually checked on your order. We do not issue generic certificates.

Sample timing is confirmed for the selected configuration. A small trial batch can be agreed before volume orders.

FAQ

Are 332/F9030, 20/925580 and 7029120048 interchangeable?

Not automatically. They appear in the same catalogue row, but we confirm the match on shaft, flange, ports, rotation and machine PIN.

Which JCB machines does this pump fit?

It is listed for the JCB 3CX and 4CX backhoe loader main pump position. Builds vary across production ranges, so we confirm fit by PIN.

What do you need to prepare a quote?

Send your machine PIN, photos of the old pump nameplate, shaft and ports, the order quantity and the destination country.

Can I order a sample or a small trial batch?

Yes. We quote sample cost and timing for the configuration you confirm.

Do you offer private label packaging?

Yes. We supply white-label pumps and custom logos, labels and cartons, and confirm the artwork before packing.

What happens before shipment?

Every order is inspected before shipment against the approved drawing and the agreed check items. Documents are issued only for checks we actually performed.

What are the delivery and trade terms?

Prices are EXW Hebei, China. Lead time and payment terms are stated on the proforma invoice for each quantity and configuration.

Call To Action

Send your machine PIN, old pump photos, quantity and destination market. You will receive a configuration check, an EXW Hebei quotation with quantity price tiers, and sample terms for the 332/F9030 tandem pump.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.