1434-503-200-00 Hydraulic Gear Pump For Iseki Tractors

1 / 2
Item Catalogue reference and verification
Part references 1434-503-200-00; 1434-503-2000-0 (catalogue formatting)
Equipment Selected Iseki TX2140 and TX2160 tractors. Catalogue format 1434-503-2000-0, figure 31. Verify by model suffix and serial number.
Interface Confirm shaft profile, mounting pilot, bolt pattern, port dimensions and rotation from the original pump or approved drawing.
Development Dedicated tooling required. One-time tooling fee paid upfront and refunded in full at the agreed cumulative purchase quantity.
Warranty One year. Coverage is detailed in the written quotation.
Product Information

1434-503-200-00 Hydraulic Gear Pump for Iseki TX2140 and TX2160 Tractors

Drawing-Matched Gear Pump

The 1434-503-200-00 hydraulic gear pump is built for selected Iseki TX2140 and TX2160 tractors, and every unit is produced against a drawing that you and we have both signed off.

This pump is not quoted from a photo and not shipped from a shelf. Production needs dedicated tooling and an approved sample unit first, so it does not suit a purchase that has to skip the tooling stage. It does suit a distributor building a repeat-supply line for Iseki TX2140 and TX2160 tractors, or a brand owner who wants the pump under its own label.

Your first order carries a one-time tooling fee. Cumulative orders of this same model count toward the quantity written into your quotation, and the full fee is refunded once that quantity is reached. Pumps leave our Hebei, China plant on EXW terms with a one-year warranty, and the coverage terms are set out in writing.

Catalogue reference

Listed as 1434-503-2000-0 in the parts catalogue, figure 31.

Warranty

One year, with coverage terms defined in the written agreement.

Trade term

EXW, Hebei, China.

Matching 1434-503-200-00 to Your Iseki TX2140 and TX2160 Tractors

Two number formats point to one pump, and the drawing decides the final configuration.

Part number and catalogue format

Parts lists and parts catalogues write the same number differently. Part number 1434-503-200-00 appears in the catalogue format as 1434-503-2000-0 under figure 31, and both refer to this hydraulic gear pump. Some catalogue pages print one format and some print the other. Quote either one on an RFQ and we will cross-check it against figure 31 before any drawing work starts.

Why photos are for identification only

The product photos help you recognise the pump body, but they do not confirm port positions, shaft details or rotation. Selected TX2140 and TX2160 tractors can differ by build period, so the final configuration is fixed only by a drawing that both sides confirm. Distributors who source in several languages may list the same item as a bomba hidráulica de engranajes, a pompe hydraulique à engrenages, a шестерённый гидронасос or a مضخة تروس هيدروليكية. The same drawing check applies whatever name appears on your purchase order. The Iseki name and tractor model names are used only to identify the application.

Details to Confirm Before We Quote This Iseki Tractor Gear Pump

Our engineers check four inputs item by item against the drawing before a price is issued.

Part number and figure reference

Send 1434-503-200-00 or 1434-503-2000-0 together with the catalogue figure number. A matching figure reference removes most ambiguity before any engineering time is spent.

Original sample or drawing

A physical sample or a dimensioned drawing is required. Photos alone cannot carry the tolerances that the tooling is built from, so quotation waits until one of the two is received.

Mounting interface and rotation

Flange pattern, shaft form, port positions and direction of rotation are compared against your reference. These are the points where tractor builds most often differ.

Tractor model and year

State whether the units go on TX2140 or TX2160 tractors, and give the build year where you know it. This narrows the configuration check when two drawing versions exist.

Dedicated Tooling for 1434-503-200-00 and How the Tooling Fee Is Refunded

One set of tooling, one fee paid upfront, and a written quantity that triggers a full refund.

How the fee works

This model cannot go into production on shared tooling. A dedicated set has to be made to the confirmed drawing. After you accept the written quotation, you prepay a one-time tooling fee and tooling work begins. Every later order of this same model adds to your cumulative total. When that total reaches the quantity stated in the written agreement, the full tooling fee is refunded.

What it changes for distributors and OEM buyers

For a distributor, the fee works as an advance against volume rather than a sunk cost. The refund is tied to cumulative orders, not to a single large first order, so you can stage purchases to match sell-through. For an OEM or private-label buyer, the tooling is built to a drawing you approved, and every later batch comes off the same geometry. The fee amount and the refund quantity both appear in your quotation, so you can calculate landed cost before you commit.

Confidentiality of tooling and drawings

Drawings, samples and tooling records are handled under the confidentiality terms both parties agree in writing. An NDA can be signed before you send drawings.

The tooling fee is paid once, and it is refunded in full when cumulative orders of this model reach the agreed written quantity.

From Sample or Drawing to Production Order

Six stages, each closed out in writing before the next one starts.

Submit sample or drawing

Send the part number, a physical sample or a dimensioned drawing, and your target quantity.

Configuration check

Engineers compare interfaces, rotation and dimensions, then return a drawing for joint confirmation.

Written quotation

The quotation covers unit pricing by quantity tier, the tooling fee, the refund quantity, MOQ and packaging.

Tooling fee and tooling

Once the tooling fee is prepaid, dedicated tooling is made to the confirmed drawing.

Sample approval

Sample pumps from the new tooling are sent for your check, and batch production waits for your written approval.

Batch production and EXW handover

Batches are built to the approved sample and released EXW from our plant in Hebei, China.

How We Keep Every Gear Pump Batch Consistent

Consistency comes from fixing the reference before production, not from sorting parts afterwards.

Each batch is produced from one confirmed drawing and one dedicated tooling set. Once the sample is approved, that sample becomes the physical reference, and batch parts are compared against it and against the drawing. Configuration changes are not made mid-run. A revision means a revised drawing, confirmed by both sides, before the next batch starts.

Every pump carries a one-year warranty. The coverage, the claim process and any exclusions are written into the sales agreement rather than left to interpretation. Our work in gear pump manufacturing and sample-based tooling development is the reason this sequence is fixed: drawing, tooling, sample approval, then volume.

Supply Options for Distributors and Private-Label Brands

The commercial terms are stated in the written quotation.

Tiered pricing

Unit prices step down by quantity tier, with each tier listed in the written quotation.

White-label or custom packaging

Choose neutral boxes or packaging printed with your brand and part labelling.

Cumulative tooling refund

Repeat orders of this model count toward the refund of the tooling fee.

MOQ in writing

The MOQ for each order stage is stated in your quotation.

Questions Buyers Ask About the 1434-503-200-00 Gear Pump

Can I order from the product photos alone?
No. Production requires a confirmed drawing or a physical sample, because photos cannot show rotation, port details or tolerances.
Why is the tooling fee paid upfront, and how is it refunded?
The fee covers dedicated tooling built only for this model. It is refunded in full once your cumulative orders of the same model reach the quantity stated in the written agreement.
Can the pump be packed under my own brand?
Yes. White-label and custom packaging are available, and the packaging details are agreed in the quotation.
What trade term applies?
EXW, from our plant in Hebei, China. Your forwarder collects the goods there.

Request a Written Quotation for 1434-503-200-00

Send the part number, a drawing or sample photos, your estimated annual quantity and your packaging requirement, whether neutral, white-label or private-label. You will receive a written quotation with tiered pricing, the tooling fee, the refund quantity and a tooling plan.

Part number or catalogue figure reference

Drawing, sample, or photos of your sample

Estimated quantity and packaging type

Request a Written Quotation

Tooling, Pricing & Warranty

This model requires dedicated tooling before production. We first review your original pump sample or approved drawing to confirm the mounting interface, drive and ports.

Before development begins, we confirm the one-time tooling fee and the qualifying purchase quantity in writing. The tooling fee is paid upfront. We refund it in full once cumulative purchases of this model reach the agreed quantity. Multiple orders for this model can count towards that total.

Olive Branch Hydraulics offers competitive pricing, consistent product quality and a one-year warranty. We quote against the confirmed specification and order quantity. Warranty coverage and the tooling refund terms are stated in the written quotation.

Catalogue and fitment references

1434-503-200-00; 1434-503-2000-0 (catalogue formatting)

Selected Iseki TX2140 and TX2160 tractors. Catalogue format 1434-503-2000-0, figure 31. The photo shows a reference configuration for identification.

View the catalogue reference

Regional search terms: bomba hidráulica de engranajes 1434-503-200-00, pompe hydraulique à engrenages 1434-503-200-00, шестерённый гидронасос 1434-503-200-00, مضخة تروس هيدروليكية 1434-503-200-00.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.