NSH32-16 / NSH50-16 Tandem Hydraulic Gear Pumps

Item Configuration reference
Brand Olive Branch Hydraulics
Model NSH32-16 / НШ32-16; NSH50-16 / НШ50-16
Pump type Two-section external gear pump; single drive shaft
Nominal displacement NSH32-16: 32 + 16 cm³/rev; NSH50-16: 50 + 16 cm³/rev; confirm quoted execution
Theoretical flow ratio NSH32-16: 2:1; NSH50-16: 3.125:1
Interfaces Splined shaft; flange and ports require drawing confirmation
Rotation Confirm viewed from drive-shaft end
Operating limits Pressure, speed, seals and oil requirements follow the approved assembly data sheet
Image NSH50-16 supplier reference; model-specific dimensions and current photographs require confirmation
Item Configuration reference
Brand Olive Branch Hydraulics
Model NSH50-16 / НШ50-16
Pump type Two-section external gear pump; single drive shaft
Nominal displacement 50 + 16 cm³/rev; confirm quoted execution
Theoretical flow ratio 3.125:1
Interfaces Splined shaft; flange and ports require drawing confirmation
Rotation Confirm viewed from drive-shaft end
Operating limits Pressure, speed, seals and oil requirements follow the approved assembly data sheet
Image Supplier reference; not an Olive Branch production-batch photograph
Product Information

NSH32-16 and NSH50-16: shared external construction, different displacement

This page groups two tandem gear-pump enquiry models with the same external construction style. Select the complete model and verify its drawing before ordering. Similar appearance does not establish equal dimensions or interchangeability.

Model / Russian reference Nominal sections Theoretical flow ratio
NSH32-16 / НШ32-16 / НШ 32/16 32 + 16 cm³/rev 2:1
NSH50-16 / НШ50-16 / НШ 50/16 50 + 16 cm³/rev 3.125:1

Chinese enquiry references: 32+16双联液压齿轮泵、50+16双联液压齿轮泵. The displayed photograph represents the NSH50-16 supplier reference. It is not a model-specific photograph or dimensional drawing for NSH32-16. Shaft, flange, ports, rotation and operating limits must be confirmed separately for each quoted execution.

NSH50-16 tandem hydraulic gear pump

The NSH50-16 is a two-section external gear-pump reference with nominal 50 and 16 cm³/rev sections driven by one shaft. Olive Branch Hydraulics is a hydraulic component manufacturer in China providing configuration review and OEM/ODM discussion for Russian and CIS equipment enquiries. Final supply is confirmed against an agreed specification and installation drawing.

Two unequal sections allow a single mechanical drive to serve two hydraulic flow requirements. At equal shaft speed the theoretical flow ratio is 50:16, or 3.125:1. Actual delivery depends on pressure, speed, temperature, viscosity and internal leakage. The displacement combination does not establish a guaranteed flow or a universal pressure rating.

Identify the complete pump before ordering

Enquiry spellings include NSH50-16, NSh 50-16, NSH 50/16, НШ50-16 and НШ 50-16. The Chinese search term is 50+16双联液压齿轮泵. Preserve every suffix, rotation arrow and original assembly or material number. No additional part number is assigned without supporting identification.

A 50+10, 50+32 or 50+50 tandem has a different displacement combination. Similar model names do not prove matching shafts, port positions, mounting dimensions or section order. Send readable nameplate photographs and measured interfaces instead of relying on the machine family alone.

Reference photograph and installation checks

The single photograph is a supplier reference associated with the NSH50-16 listing, not an Olive Branch production-batch photograph. Request current supply photographs and an approved drawing before confirming an order. The image does not establish internal dimensions, shaft-end rotation or operating limits.

Check shaft diameter, spline count, spline profile and projection. Confirm pilot diameter, flange thickness, mounting-hole centres and installation clearance. Identify each inlet and outlet connection separately, including thread or flange pattern and connection size. Determine rotation looking directly at the drive-shaft end.

Information for a matched quotation

  • Complete model, readable marking photographs, quantity and machine model.
  • Original assembly or material number where available.
  • Shaft, flange and port measurements or an installation drawing.
  • Pressure requirements for both circuits and shaft-speed range.
  • Hydraulic oil, operating temperature and seal requirements.
  • Packaging requirements and delivery destination.

The coupling and drive must support the combined torque demand of both sections. Separate circuits still share the mechanical input. Relief settings, filtration, inlet conditions and commissioning must follow the approved system specification. Continuous, intermittent and peak limits require separate confirmation for the quoted assembly.

Frequently asked questions

Does 50+16 mean 66 litres per minute?

No. These are nominal displacement figures per revolution. Theoretical section flow in L/min equals displacement in cm³/rev multiplied by rpm and divided by 1,000. Delivery under load is lower.

Are all NSH50-16 pumps interchangeable?

No. Match the full marking, shaft, mounting flange, ports, rotation and operating requirements against the approved drawing.

Is the illustrated pump right-hand or left-hand?

Confirm the required execution from the shaft end. The photograph alone is insufficient to assign rotation.

Which pressure and speed limits apply?

Request the data sheet for the exact quoted assembly. Another supplier's values or another NSH model's rating do not establish a guarantee.

Can you review a sample or drawing?

Yes. Olive Branch Hydraulics can discuss configuration review, OEM/ODM work and sample production against an agreed specification.

How do I obtain price and delivery?

Send the full model, quantity and installation details. The quotation will confirm configuration, production schedule, packaging and commercial terms.

Russian enquiry terms

НШ50-16, НШ 50/16, насос шестеренный сдвоенный, тандемный гидравлический насос 50+16 см³. Укажите полную маркировку, направление вращения со стороны вала и размеры присоединений.

NSH50-16 tandem hydraulic gear pump

The NSH50-16 is a two-section external gear-pump reference with nominal 50 and 16 cm³/rev sections driven by one shaft. Olive Branch Hydraulics is a hydraulic component manufacturer in China providing configuration review and OEM/ODM discussion for Russian and CIS equipment enquiries. Final supply is confirmed against an agreed specification and installation drawing.

Two unequal sections allow a single mechanical drive to serve two hydraulic flow requirements. At equal shaft speed the theoretical flow ratio is 50:16, or 3.125:1. Actual delivery depends on pressure, speed, temperature, viscosity and internal leakage. The displacement combination does not establish a guaranteed flow or a universal pressure rating.

Identify the complete pump before ordering

Enquiry spellings include NSH50-16, NSh 50-16, NSH 50/16, НШ50-16 and НШ 50-16. The Chinese search term is 50+16双联液压齿轮泵. Preserve every suffix, rotation arrow and original assembly or material number. No additional part number is assigned without supporting identification.

A 50+10, 50+32 or 50+50 tandem has a different displacement combination. Similar model names do not prove matching shafts, port positions, mounting dimensions or section order. Send readable nameplate photographs and measured interfaces instead of relying on the machine family alone.

Reference photograph and installation checks

The single photograph is a supplier reference associated with the NSH50-16 listing, not an Olive Branch production-batch photograph. Request current supply photographs and an approved drawing before confirming an order. The image does not establish internal dimensions, shaft-end rotation or operating limits.

Check shaft diameter, spline count, spline profile and projection. Confirm pilot diameter, flange thickness, mounting-hole centres and installation clearance. Identify each inlet and outlet connection separately, including thread or flange pattern and connection size. Determine rotation looking directly at the drive-shaft end.

Information for a matched quotation

  • Complete model, readable marking photographs, quantity and machine model.
  • Original assembly or material number where available.
  • Shaft, flange and port measurements or an installation drawing.
  • Pressure requirements for both circuits and shaft-speed range.
  • Hydraulic oil, operating temperature and seal requirements.
  • Packaging requirements and delivery destination.

The coupling and drive must support the combined torque demand of both sections. Separate circuits still share the mechanical input. Relief settings, filtration, inlet conditions and commissioning must follow the approved system specification. Continuous, intermittent and peak limits require separate confirmation for the quoted assembly.

Frequently asked questions

Does 50+16 mean 66 litres per minute?

No. These are nominal displacement figures per revolution. Theoretical section flow in L/min equals displacement in cm³/rev multiplied by rpm and divided by 1,000. Delivery under load is lower.

Are all NSH50-16 pumps interchangeable?

No. Match the full marking, shaft, mounting flange, ports, rotation and operating requirements against the approved drawing.

Is the illustrated pump right-hand or left-hand?

Confirm the required execution from the shaft end. The photograph alone is insufficient to assign rotation.

Which pressure and speed limits apply?

Request the data sheet for the exact quoted assembly. Another supplier's values or another NSH model's rating do not establish a guarantee.

Can you review a sample or drawing?

Yes. Olive Branch Hydraulics can discuss configuration review, OEM/ODM work and sample production against an agreed specification.

How do I obtain price and delivery?

Send the full model, quantity and installation details. The quotation will confirm configuration, production schedule, packaging and commercial terms.

Russian enquiry terms

НШ50-16, НШ 50/16, насос шестеренный сдвоенный, тандемный гидравлический насос 50+16 см³. Укажите полную маркировку, направление вращения со стороны вала и размеры присоединений.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.