NSH40 / NSH50 / NSH63 Reversible Hydraulic Gear Pumps

Reversible NSH Series Selection

Item Configuration reference
Brand / manufacturing service Olive Branch Hydraulics, China; OEM / ODM to agreed specification
Displacement options 40, 50 or 63 cm³/rev; one displacement per pump
Pump construction Fixed-displacement external gear pump, reversible reference execution
Procurement references HDX-NSH-40 / 50 / 63; HDXNSH40 / HDXNSH50 / HDXNSH63, supplier identification codes only
Mounting / drive family NSH 32–50 mounting and shaft reference; verify exact dimensions
Reference port choices 40 cc: G 3/4; 50 and 63 cc: G 1; confirm port positions and sealing on drawing
Pressure reference Supplier lists 25 MPa; continuous, peak and test conditions require confirmed supply data
Speed / rotation Reversible configuration; approved speed limits and port functions to be confirmed
63 cc drawing reference 90 mm pilot; 110 × 86 mm bolt centres, four 11 mm holes; nominal 25 mm shaft — reference drawing only
Photograph One supplier series reference, nameplate removed; not an Olive Branch production-batch photograph
Product Information

Reversible Gear Pumps With NSH Mounting Interfaces

The 40, 50 and 63 cm³/rev reversible NSH configurations cover three displacement choices in a common external construction family. Each is a single fixed-displacement gear pump. They are grouped together for model selection, with the actual displacement and interfaces confirmed on the order drawing. The reference construction has a closed front mounting plate, a splined shaft and threaded oil connections.

Olive Branch Hydraulics is a Chinese hydraulic-component manufacturer providing OEM and ODM services. Supply specifications are agreed against the existing pump marking, measured interfaces and hydraulic duty. A shared mounting-family description does not establish that every NSH32 or NSH50 installation accepts this construction.

Models and Procurement References

Enquiry reference Nominal displacement Supplier-listed port reference
HDX-NSH-40 / HDX-НШ-40 / HDXNSH40 40 cm³/rev G 3/4
HDX-NSH-50 / HDX-НШ-50 / HDXNSH50 50 cm³/rev G 1
HDX-NSH-63 / HDX-НШ-63 / HDXNSH63 63 cm³/rev G 1

These HDX codes are market supplier identification references. They identify the configuration being discussed and are not Olive Branch part numbers or an assertion of brand affiliation. Retain the Cyrillic suffix РУЧ, any additional marking and the original equipment assembly number when requesting a matched quotation.

Reversible Configuration and Flow Selection

Reversible execution must be confirmed as a complete pump specification. Do not assume an ordinary pump with a fixed rotation can be converted by reversing its drive. The supplied drawing must define rotation, port functions and any operating restrictions for both directions. Confirm the intended circuit and control arrangement before connecting hoses.

Displacement is oil volume per revolution, not a constant flow rate. At 1,000 rpm the theoretical flows are 40, 50 and 63 L/min respectively, before leakage. A larger displacement changes both flow and drive loading at the same pressure and speed. Provide the required delivery, available drive speed and pressure duty when selecting the model.

Mounting, Ports and Operating Limits

The supplier lists an NSH 32–50 mounting and shaft family. Its 63 cc reference drawing shows a 90 mm locating pilot, a 110 by 86 mm fixing-hole pattern with four 11 mm holes, and a nominal 25 mm shaft. These are identification dimensions from that drawing, not an approved installation drawing for every displacement or supplier execution.

Check spline profile, engagement length, shaft projection, flange thickness and overall clearance. Verify the thread standard, sealing method and position of each connection. The supplier lists G 3/4 ports for the 40 cc reference and G 1 for the 50 and 63 cc references; confirm the actual build rather than ordering hose fittings from a photograph.

A 25 MPa pressure figure appears in the supplier references. It is not a substitute for the supplied pump data sheet. Continuous, intermittent, peak and test pressures need separate confirmation. Likewise, the approved speed range, oil viscosity, temperature and inlet conditions must correspond to the quoted configuration.

Frequently Asked Questions

1. Are 40, 50 and 63 separate pump sections?

No. They are alternative single-pump displacements, grouped in one construction family.

2. Can I reverse any standard NSH pump?

No. Order a confirmed reversible execution with the correct circuit and port specification.

3. Does NSH 32–50 mounting guarantee fit?

No. Check the pilot, flange pattern, spline, shaft length and ports against the existing installation.

4. Does the photograph show every displacement?

No. One supplier series photograph is available. Its nameplate has been removed for presentation; it is not a production-batch photograph or a separately identified sample of each option.

5. Is a machine part number available?

There is no verified universal equipment part number for all applications. Send the old pump marking and machine identification for review.

6. How are quotation and supply confirmed?

Send displacement, quantity, destination, interfaces and operating duty. The quotation confirms the agreed build, technical documents and delivery terms.

Enquiry Terms

Reversible NSH gear pump; 40 cc, 50 cc or 63 cc hydraulic pump; HDXNSH40, HDXNSH50, HDXNSH63; реверсивный насос НШ 40 / 50 / 63; NSH双向旋转齿轮泵、40/50/63排量液压泵.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.