NSH28-10-10 Three-Section Hydraulic Gear Pump

1 / 3

NSH28-10-10 Technical Reference

Item Specification / confirmation
Model / procurement reference NSH28-10-10 / НШ28-10-10
Pump construction Three external gear sections driven by one input shaft
Nominal displacement 28 + 10 + 10 cm³/rev; confirm section order on drawing
Theoretical flow ratio 2.8 : 1 : 1 at equal shaft speed, before volumetric losses
Pressure and speed Working / peak pressure and speed limits to be confirmed for the ordered build
Drive shaft and spline Splined reference shown; tooth count, diameter and projection require drawing confirmation
Mounting flange Pilot diameter, bolt pattern and overall length to be matched to the installation
Ports and rotation Confirm every inlet / outlet connection and rotation viewed from the shaft end
Equipment application Multi-circuit hydraulic systems; machine model and installation must be checked individually
Manufacturing service Olive Branch Hydraulics, China; OEM / ODM quotation to agreed specification
Product Information

One Drive, Three Gear-Pump Sections

The NSH28-10-10 is a three-section hydraulic gear-pump configuration with nominal displacements of 28, 10 and 10 cm³ per revolution. Its larger front section and two smaller rear sections distinguish this assembly from the twin-section NSH pumps in our range. A common mechanical drive turns the sections together, allowing a machine designer to supply several hydraulic circuits from one pump assembly.

Olive Branch Hydraulics is a Chinese hydraulic-component manufacturer providing OEM and ODM services. For an NSH28-10-10 enquiry, send the complete pump marking, machine information and clear photographs. We review the required build against the available drawing or physical sample before confirming production details, delivery and quotation.

Displacement and Circuit Planning

The nominal section combination is 28+10+10 cc/rev. At the same shaft speed, the theoretical flow ratio is 2.8:1:1. For example, at 1,000 rpm the ideal section flows are 28, 10 and 10 L/min before internal leakage. This calculation illustrates displacement only; it does not establish a permitted operating speed or guarantee delivered flow under load.

Each circuit needs a suitable system design, including pressure protection, oil supply and compatible connections. Specify the simultaneous load conditions for all three sections. Pressure, shaft torque, temperature and drive capacity must be reviewed together for the ordered assembly. Please provide your required continuous pressure, peak pressure, speed range, oil type and operating temperature with the enquiry.

Confirm the Installation Before Ordering

Start with the drive shaft: spline tooth count, outside diameter, engagement length and shaft projection. Then confirm the mounting pilot, fixing-hole centres, flange thickness and total assembly length. Record the port size, sealing arrangement and position on every section. Specify rotation as viewed from the shaft end; an abbreviation or photograph alone can be ambiguous.

The intended application is a multi-circuit hydraulic system. Tractor, agricultural-machine and construction-equipment enquiries are assessed individually using machine model, existing pump identification and installation dimensions. A matching model string alone is insufficient to confirm a direct fit. Include the original equipment part number when available; there is no verified universal equipment part number for every pump using this designation.

Frequently Asked Questions

1. What does 28-10-10 describe?

It identifies the nominal 28+10+10 cm³/rev section combination. Confirm the section sequence and full suffix on the quotation drawing.

2. Is this a twin or triple pump?

This page covers the three-section structure shown in the reference photographs. It has one larger front pumping section followed by two smaller sections.

3. Are similar model spellings interchangeable?

NSH28-10-10, НШ28-10-10 and НШ 28-10-10 are useful search forms. Additional letters or suffixes may identify different specifications and need verification.

4. Can I order a different displacement combination?

Send the required combination and installation drawing for an OEM review. Variants sharing this external structure can be quoted together after technical confirmation.

5. Do the photographs show the supplied production batch?

They are supplier reference photographs with the nameplate removed for presentation. They illustrate the configuration; final dimensions, markings and supplied build follow the approved order specification.

6. What should I send for a quotation?

Send quantity, destination, full model marking, equipment part number, shaft and flange dimensions, port details, rotation and duty requirements. A drawing or sample helps resolve uncertain details.

Search and Enquiry References

English: NSH28-10-10 triple gear pump, three-section hydraulic pump, 28+10+10 cc gear pump. Russian: насос НШ28-10-10, трехсекционный шестеренный насос. Chinese: NSH28-10-10三联齿轮泵、28+10+10排量液压泵. Use these references together with your machine details when contacting Olive Branch Hydraulics.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.