Snowplow Motor Buying Guide: Comparing Hydraulic, Electric & Replacement Options for Pro Operators
Snowplow motor buying guide for contractors and fleets. Compare hydraulic vs electric, top brands, cold-weathe…
| Base model | Displacement (ml/rev) | Rated pressure (MPa) | Catalogue maximum pressure (MPa) | Optimum speed (rpm) | Catalogue speed range (rpm) | Volumetric efficiency (%) |
|---|---|---|---|---|---|---|
| CBW-F304 | 4 | 20 | 25 | 1500–2500 | 800–3000 | ≥90 |
| CBW-F306 | 6 | 20 | 25 | 1500–2500 | 800–3000 | ≥90 |
| CBW-F308 | 8 | 20 | 25 | 1500–2500 | 800–3000 | ≥90 |
| CBW-F310 | 10 | 20 | 25 | 1500–2500 | 800–3000 | ≥91 |
| CBW-F314 | 14 | 20 | 25 | 1500–2500 | 800–3000 | ≥91 |
| CBW-F316 | 16 | 20 | 25 | 1500–2500 | 800–3000 | ≥92 |
| CBW-F320 | 20 | 20 | 25 | 1500–2500 | 800–3000 | ≥92 |
Data follows the selected CBW-F3 catalogue configuration. Maximum pressure is not a continuous rating for every duty cycle. Confirm speed, fluid temperature and circuit conditions for the ordered assembly.
| Selection item | Specification |
|---|---|
| Family | CBW-F3; CBW-F300 is also used as a family search designation |
| Pictured mounting | Rectangular four-hole front flange; verify pilot, hole spacing and thickness against the selected drawing |
| Shaft options | P: plain key; B: flat end; H4: rectangular spline. The photographs show the splined configuration. |
| Port options | F: flange connection; L: threaded connection. Confirm inlet/outlet position and actual size. |
| Rotation | L: counterclockwise; R: clockwise according to the catalogue. Confirm the viewing direction and complete suffix. |
| OEM / material number | Equipment-specific material numbers are verified from the existing nameplate or machine documentation; no universal OEM number assigned. |
| Equipment application | Agricultural and other hydraulic systems; exact tractor or harvester compatibility requires drawing and circuit verification. |
Olive Branch Hydraulics is a Chinese hydraulic component manufacturer providing OEM/ODM production, custom tooling and sample-based development. This page combines seven CBW-F3 displacement models with their shaft and oil-port choices. The approved photographs show the same external family from two angles: an aluminium body, a rectangular four-hole front flange and a splined drive shaft. These reference views help identify the configuration for an enquiry; the final production drawing defines the exact assembly.
The selected catalogue lists CBW-F304, CBW-F306, CBW-F308, CBW-F310, CBW-F314, CBW-F316 and CBW-F320. Their displacements range from 4 to 20 ml per revolution. CBW-F3 and CBW F3 identify the series. CBW-F300 is another family search description used in the market, but a family name does not establish interchangeable dimensions or ratings between manufacturers.
| Catalogue model | Search spellings / spacing variants |
|---|---|
| CBW-F304 | CBWF304 / CBW F304 / CBW F3-4 |
| CBW-F306 | CBWF306 / CBW F306 / CBW F3-6 |
| CBW-F308 | CBWF308 / CBW F308 / CBW F3-8 |
| CBW-F310 | CBWF310 / CBW F310 / CBW F3-10 |
| CBW-F314 | CBWF314 / CBW F314 / CBW F3-14 |
| CBW-F316 | CBWF316 / CBW F316 / CBW F3-16 |
| CBW-F320 | CBWF320 / CBW F320 / CBW F3-20 |
Keep the displacement digits and complete configuration suffix in a purchase specification. Search spellings are provided for identification and are not additional mechanical designs. The asterisks in a catalogue pattern such as CBW-F320-**** represent configuration fields to be completed; they are not literal ordering characters. Additional displacement codes found in another manufacturer catalogue need a separate drawing review before being added to this selected configuration.
| Shaft code | Description | Selection note |
|---|---|---|
| P | Plain-key shaft | The reference drawing shows a 16 mm keyed shaft; confirm projection and key dimensions. |
| B | Flat-end shaft | The pictured technical sheet limits its illustrated flat-end shaft to displacement ≤10 ml/rev. Larger-displacement requests require confirmation. |
| H4 | Rectangular spline shaft | This is the shaft category shown in the approved product photographs; confirm spline dimensions and coupling engagement. |
The two photographs show different views of a splined pump, not separate evidence of every shaft variant. Straight-key and flat-end options are documented in the technical drawing. Send a shaft-end photograph, coupling measurements or a dimensioned sample drawing when an identical interface is required. Other spline standards or special shafts require engineering review rather than an assumed match.
The gallery includes the original installation and shaft-end drawing. It contains rectangular four-hole and oval two-hole mounting arrangements. The oval view explains an alternative series configuration and must not be applied to the photographed square-flange pump. For the rectangular view, the sheet shows a 70 × 100 mm mounting-hole spacing, four 9 mm holes and a 38 mm locating pilot. Confirm tolerances, flange thickness and the full configuration before installation.
| Model | Catalogue L1 (mm) | Catalogue L (mm) | Reference weight (kg) |
|---|---|---|---|
| CBW-F304 | 43.3 | 93 | 2.3 |
| CBW-F306 | 45 | 96.5 | 2.4 |
| CBW-F308 | 46.5 | 99.5 | 2.5 |
| CBW-F310 | 48 | 102.5 | 2.6 |
| CBW-F314 | 51 | 108.5 | 2.8 |
| CBW-F316 | 53 | 112.5 | 2.9 |
| CBW-F320 | 56.5 | 119.5 | 3.1 |
L1 and L follow the lettering used in this selected catalogue. Length and weight depend on the front cover, shaft and port configuration. These values support initial selection and are not a substitute for an approved manufacturing drawing. Other published CBW-F3 catalogues use different lengths or speed ratings for similarly named models; their values must not be mixed into this table.
The selected performance table gives 20 MPa rated pressure, 25 MPa catalogue maximum pressure, an optimum speed band of 1500–2500 rpm and a catalogue operating range of 800–3000 rpm. An optimum band is not a single rated-speed value. Select the operating point using the required flow, drive speed, fluid and relief-valve setting. Confirm maximum-pressure duration and permissible combined speed and pressure for the intended duty.
CBW-F3 pumps are used in agricultural and other machinery hydraulic systems. A base model alone does not identify an exact tractor, harvester or power-unit fitment. Send the existing pump nameplate, machine details, mounting dimensions and port layout for verification. Any confirmed equipment part number can then be recorded against the approved configuration.
To request a quotation, provide full model, quantity, required rotation, displacement, operating pressure, drive speed, shaft code and oil-port arrangement. Include clear front, rear and side photographs or a physical sample where precise duplication is needed. We review custom shaft and mounting requirements, agree the order drawing and inspection specification, and confirm packaging and delivery terms for the selected production build.
Search terms: CBW-F3 hydraulic gear pump, CBW F3 agricultural pump, CBW-F300 pump, CBW-F320 square flange gear pump, rectangular spline shaft pump, plain-key shaft hydraulic pump, flat-end gear pump, OEM ODM hydraulic pump manufacturer.
These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.
| Market / language | Product search phrases |
|---|---|
| English — international buyers | CBW-F3 hydraulic gear pump; CBW-F3 gear oil pump |
| Russia / Kazakhstan — Russian | CBW-F3 шестеренный насос; CBW-F3 гидравлический насос |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica de engranajes CBW-F3; bomba CBW-F3 |
| Egypt / Iraq / Arabic-speaking markets | مضخة تروس هيدروليكية CBW-F3 |
| Türkiye — Turkish | CBW-F3 hidrolik dişli pompa; CBW-F3 dişli pompa |
| Brazil — Portuguese | bomba hidráulica de engrenagens CBW-F3 |
| Vietnam — Vietnamese | bơm bánh răng thủy lực CBW-F3 |
| Indonesia — Indonesian | pompa roda gigi hidrolik CBW-F3 |
| French-speaking markets | pompe hydraulique à engrenages CBW-F3 |
Search family reference: CBW-F3. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.
Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.
Snowplow motor buying guide for contractors and fleets. Compare hydraulic vs electric, top brands, cold-weathe…
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Discover how hydraulic gear pumps work, why they still dominate industry, and key components to watch when spe…
Skip priming and your gear pump dies in seconds. Learn the 5-minute procedure that prevents scoring, cavitatio…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.