Orbital Motor Shaft Seal Looks Uneven? Check Before Fitting
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
| Base model | Displacement (mL/rev) | Screw inlet | Screw outlet | L1 (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| CBTQ-F410 | 10 | M22×1.5, depth 16 mm | M18×1.5, depth 16 mm | 57 | 116 | 3.4 |
| CBTQ-F416 | 16 | M22×1.5, depth 16 mm | M18×1.5, depth 16 mm | 60 | 122 | 3.7 |
| CBTQ-F422 | 22 | M33×2, depth 20 mm | M27×2, depth 18 mm | 63.5 | 129 | 4.0 |
| CBTQ-F425 | 25 | M33×2, depth 20 mm | M27×2, depth 18 mm | 66 | 133 | 4.2 |
Rated pressure: 20 MPa. Maximum pressure: 25 MPa. Optimum speed: 1500–2500 rpm. Catalogue operating range: 800–3000 rpm. Volumetric efficiency: ≥92%.
Oval mounting alternatives: A nominal 100 mm pilot or A1 nominal 101.6 mm pilot. Shaft: 13-tooth SAE spline, 16/32 diametral pitch, 30° pressure angle. F flange or L screw port options require the matching configuration drawing. Left-hand and right-hand rotation are separate ordering choices.
Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM production, sample-based development and manufacture to approved drawings. This CBTQ family uses an oval two-hole mounting arrangement and a 13-tooth SAE spline drive shaft. The verified catalogue range comprises four displacement choices from 10 to 25 mL per revolution.
This product groups the four base models for the selected body style. Three product images illustrate the overall pump, shaft-end flange and side port arrangement. The installation drawing is included in the gallery. Pump length varies with displacement; photographs do not establish every configuration, rotation or individual model dimension.
| Base model | Displacement (mL/rev) | Screw inlet | Screw outlet | L1 (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| CBTQ-F410 | 10 | M22×1.5, depth 16 mm | M18×1.5, depth 16 mm | 57 | 116 | 3.4 |
| CBTQ-F416 | 16 | M22×1.5, depth 16 mm | M18×1.5, depth 16 mm | 60 | 122 | 3.7 |
| CBTQ-F422 | 22 | M33×2, depth 20 mm | M27×2, depth 18 mm | 63.5 | 129 | 4.0 |
| CBTQ-F425 | 25 | M33×2, depth 20 mm | M27×2, depth 18 mm | 66 | 133 | 4.2 |
Displacement in mL/rev is numerically equal to cc/rev. Catalogue lengths and weights apply to the illustrated configuration. The screw-port values in the model table describe threaded variants and must not be applied automatically to a flange-port assembly.
Customer search descriptions include CBTQ hydraulic gear pump, CBTQ-F4 gear pump, CBTQ oval flange pump and CBTQ 13 tooth SAE spline pump. Base model spellings include CBTQ-F410, CBTQ-F416, CBTQ-F422 and CBTQ-F425. Variants written with spaces, such as CBTQ F410, are search spellings of the base designation, subject to the complete order code.
The catalogue uses configuration placeholders after the model, including patterns with the SAE 13-tooth shaft symbol. Asterisks are placeholders rather than complete orderable part numbers. The reference photograph marking includes CBTQ-F22/360B; that marking must be checked against the original assembly and is not treated as a universal suffix equivalence.
F denotes the listed 20 MPa grade and 4 identifies the series. A identifies the nominal 100 mm pilot, A1 the nominal 101.6 mm pilot, F a flange port connection and L a screw connection. Rotation L is counterclockwise; clockwise R is normally omitted in the catalogue code. Confirm rotation as viewed from the shaft end before ordering.
No separate machine OEM material number or exact tractor, harvester or loader fitment has been verified for these catalogue configurations. Similar series names from another manufacturer do not establish interchangeability.
All four listed models have catalogue rated pressure of 20 MPa, maximum pressure of 25 MPa, optimum speed of 1500–2500 rpm, operating range of 800–3000 rpm and volumetric efficiency of at least 92%. Maximum pressure is a catalogue limit, not a continuous-duty operating recommendation.
Select the displacement against the required hydraulic flow, drive speed and available power. Actual flow depends on displacement, speed, pressure, oil condition and temperature. Verify the inlet conditions and complete duty cycle before confirming the assembly.
| Interface | Original drawing reference |
|---|---|
| Pilot alternatives | A nominal 100 mm or A1 nominal 101.6 mm; select the matching mounting version |
| Mounting flange | 175 mm overall width; 140 mm or 146 mm bolt centres as shown for the alternative mounting arrangements; two 14 mm holes |
| SAE shaft | 13 teeth, 16/32 diametral pitch and 30° pressure angle |
| Spline diameters | Major reference 21.8 mm and minor reference 18.63 mm; drawing tolerances control coupling fit |
| Extension | 39 mm overall projection reference and 27 mm spline dimension shown |
Only the documented 13-tooth SAE shaft is included for this selected catalogue family. Shaft engagement, pilot fit and mounting pattern require confirmation on the approved installation drawing.
The source drawing documents both flange and threaded port arrangements. Its flange detail identifies a nominal 20 mm inlet, 15 mm outlet and M6 fixing holes, 13 mm deep, for the depicted connections. Confirm flange geometry, seals, fittings and port orientation before manufacture.
The threaded variants differ by displacement: 10 and 16 mL/rev models use the M22×1.5 inlet and M18×1.5 outlet listed in the table, while 22 and 25 mL/rev models use M33×2 and M27×2. Thread sizes alone do not specify every sealing detail; use the matching original diagram and approved assembly drawing.
The catalogue describes a high-strength aluminium-alloy housing with axial clearance compensation, radial balancing and self-lubricating bearings. The family can be evaluated for agricultural and mobile hydraulic machinery where the mounting, shaft, flow and port requirements match. Exact equipment fitment requires the original pump marking, measurements and operating requirements.
Provide the complete pump nameplate, clear photographs, required displacement, operating pressure and speed, rotation, shaft measurements, pilot and bolt dimensions, and port details. Olive Branch Hydraulics can evaluate your original sample or drawing and confirm a manufacturing specification. An exact new configuration may require a sample and tooling.
Customer search keywords: CBTQ F410 F416 F422 F425 hydraulic pump, CBTQ 10 16 22 25 cc gear pump, oval flange SAE 13 tooth pump, agricultural hydraulic gear pump, flange port screw port gear pump, China hydraulic pump manufacturer.
These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.
| Market / language | Product search phrases |
|---|---|
| English — international buyers | CBTQ hydraulic gear pump; CBTQ gear oil pump |
| Russia / Kazakhstan — Russian | CBTQ шестеренный насос; CBTQ гидравлический насос |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica de engranajes CBTQ; bomba CBTQ |
| Egypt / Iraq / Arabic-speaking markets | مضخة تروس هيدروليكية CBTQ |
| Türkiye — Turkish | CBTQ hidrolik dişli pompa; CBTQ dişli pompa |
| Brazil — Portuguese | bomba hidráulica de engrenagens CBTQ |
| Vietnam — Vietnamese | bơm bánh răng thủy lực CBTQ |
| Indonesia — Indonesian | pompa roda gigi hidrolik CBTQ |
| French-speaking markets | pompe hydraulique à engrenages CBTQ |
Search family reference: CBTQ. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.
Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Can gear pumps run in reverse? Learn how bidirectional gear pump operation works, key design differences, and…
Vane pump vs gear pump: Compare efficiency, noise, cost & applications to find the best hydraulic pump for you…
Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.