Orbital Motor Shaft Seal Looks Uneven? Check Before Fitting
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
| Model pattern | Displacement (mL/r) | L1 (mm) | L (mm) | Reference weight (kg) |
|---|---|---|---|---|
| CBTGX-G304-**** | 4 | 49 | 100 | 2.50 |
| CBTGX-G304.5-**** | 4.5 | 49.3 | 101 | 2.53 |
| CBTGX-G305-**** | 5 | 49.5 | 101.5 | 2.55 |
Rated pressure: 25 MPa (250 bar). Maximum catalogue pressure: 28 MPa (280 bar). Optimum speed: 1500–2500 rpm. Catalogue speed range: 600–4000 rpm. Volumetric efficiency: ≥92% under specified test conditions.
Oval mounting flange: A = Ø82.55 mm pilot; A1 = Ø80 mm pilot. Mounting slot centres: 106 mm; slot width: 11 mm; overall flange width: 123 mm. Shaft: 9-tooth SAE involute spline, 16/32 diametral pitch, 30° pressure angle, major diameter Ø15.45 mm, minor diameter Ø12.28 mm. Drawing shows 32 mm shaft projection and 24 mm spline length.
Ports: screw connection L; drawing shows G1/2 ports, 16 mm thread depth and Ø40 mm spot faces on both sides. Rotation: clockwise or counterclockwise configurations, specified when viewed from the shaft end; confirm the ordered rotation before manufacture.
Olive Branch Hydraulics manufactures hydraulic gear pumps and offers OEM/ODM production from confirmed samples and drawings. This product groups the CBTGX-G304, CBTGX-G304.5 and CBTGX-G305 model patterns in one body style. Their nominal displacements are 4, 4.5 and 5 mL per revolution. The photographed reference pump carries the marking CBTGX-G304-ALΦ9L[A]. This observed marking identifies the reference sample; additional suffixes must be checked against the original nameplate and drawing.
Search names include CBTGX gear pump, CBTGX-G304 pump, CBTGX-G304.5 pump, CBTGX-G305 pump, CBTGX 4 cc pump, 4.5 cc hydraulic pump, 5 cc gear pump and 9-tooth SAE spline gear pump. These names describe this listed family and are grouped here rather than published as separate products. The asterisks in the model table are configuration placeholders, not a complete order code.
The catalogue identifies G as the 25 MPa pressure grade, 3 as the product series, A and A1 as alternative oval pilot configurations, L as the screw-port connection and Φ9 as the SAE spline shaft option. A rotation letter can also appear in the full code. Code position and clockwise omission conventions should be confirmed using the specific drawing before an order is released.
The photographed style has an aluminium body, dark end covers, an oval mounting flange with open-ended mounting slots, side threaded ports and a 9-tooth drive shaft. The original installation drawing is included in the image gallery. It shows the two pilot alternatives and the SAE spline dimensions. A and A1 are separate mounting choices; the images do not establish that both pilot diameters are interchangeable in a machine.
Check pilot diameter, mounting-slot centres, shaft projection, spline geometry, port position and overall length against the original pump. Only the documented 9-tooth shaft is listed for this family. Other shaft designs require an approved sample or manufacturing drawing and are not represented by the photographs.
The model table gives 25 MPa rated pressure and 28 MPa maximum pressure, an optimum speed of 1500–2500 rpm and a wider catalogue range of 600–4000 rpm. Maximum pressure and maximum speed are not a promise of continuous simultaneous operation. Working limits depend on the duty cycle, hydraulic fluid, inlet conditions, temperature and the confirmed production specification.
Theoretical flow at 1500 rpm is 6 L/min for 4 cc, 6.75 L/min for 4.5 cc and 7.5 L/min for 5 cc. Actual delivered flow is lower because of internal leakage and changes with pressure, temperature and operating conditions. Reference lengths and weights differ by displacement as shown in the technical table.
This catalogue family is primarily described for aerial work platforms. Machine-specific agricultural compatibility has not been verified, so no tractor or harvester model is assigned to it. Confirm installation and operating requirements before selecting it for another hydraulic system. No independently verified equipment OEM material number is available for this listing. The CBTGX codes are pump model references, not verified machine OEM part numbers.
For a production quotation, send clear photographs of the complete pump, its nameplate, shaft end, mounting flange and both oil ports. Include displacement, required rotation, operating pressure, speed, pilot diameter, mounting dimensions, spline details, thread specification and quantity. We can assess sample-based manufacture, drawing-based production and tooling requirements after technical review. Final dimensions, material specification, inspection criteria and any special marking are agreed before manufacture.
These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.
| Market / language | Product search phrases |
|---|---|
| English — international buyers | CBTGX hydraulic gear pump; CBTGX gear oil pump |
| Russia / Kazakhstan — Russian | CBTGX шестеренный насос; CBTGX гидравлический насос |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica de engranajes CBTGX; bomba CBTGX |
| Egypt / Iraq / Arabic-speaking markets | مضخة تروس هيدروليكية CBTGX |
| Türkiye — Turkish | CBTGX hidrolik dişli pompa; CBTGX dişli pompa |
| Brazil — Portuguese | bomba hidráulica de engrenagens CBTGX |
| Vietnam — Vietnamese | bơm bánh răng thủy lực CBTGX |
| Indonesia — Indonesian | pompa roda gigi hidrolik CBTGX |
| French-speaking markets | pompe hydraulique à engrenages CBTGX |
Search family reference: CBTGX. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.
Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Can gear pumps run in reverse? Learn how bidirectional gear pump operation works, key design differences, and…
Vane pump vs gear pump: Compare efficiency, noise, cost & applications to find the best hydraulic pump for you…
Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.