Orbital Motor Shaft Seal Looks Uneven? Check Before Fitting
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
| Model pattern | Displacement (mL/r) | L1 (mm) | L (mm) | Reference weight (kg) | Volumetric efficiency ≥ (%) |
|---|---|---|---|---|---|
| CBT-F304-**** | 4 | 49 | 100 | 2.5 | 90 |
| CBT-F306-**** | 6 | 51 | 103 | 2.6 | 90 |
| CBT-F308-**** | 8 | 52 | 106 | 2.7 | 90 |
| CBT-F310-**** | 10 | 53.5 | 109 | 2.8 | 91 |
| CBT-F312-**** | 12 | 55 | 112.5 | 2.9 | 91 |
| CBT-F314-**** | 14 | 57 | 115 | 3.0 | 91 |
| CBT-F316-**** | 16 | 58 | 118 | 3.1 | 92 |
| CBT-F318-**** | 18 | 59.5 | 121 | 3.2 | 92 |
| CBT-F320-**** | 20 | 61 | 124 | 3.3 | 92 |
| CBT-F322-**** | 22 | 63 | 128 | 3.4 | 92 |
Rated pressure: 20 MPa (200 bar). Maximum catalogue pressure: 25 MPa (250 bar). Optimum speed: 1500–2500 rpm. Catalogue speed range: 800–3000 rpm. Efficiency values apply under the catalogue test conditions. Model asterisks are configuration placeholders.
Oval flange: A pilot Ø82.55 mm; A1 pilot Ø80 mm. Drawing: 106 mm mounting-slot centres, 11 mm slot width, 130 mm overall flange width. Screw-port configuration: M22×1.5 inlet and M18×1.5 outlet, 16 mm depth as shown by the screw-port detail. Flange-port configurations are separate options.
| Shaft option | Original drawing specification |
|---|---|
| P keyed shaft | Nominal Ø18 mm, key width 6 mm; overall projection 36 mm, keyed dimension 20 mm |
| H4 rectangular spline | 4 teeth; major Ø18 mm, minor Ø14.4 mm, tooth width 5 mm; overall projection 36 mm, spline dimension 21 mm |
| SAE 9-tooth spline | 16/32 DP, 30° pressure angle; major Ø15.45 mm, minor Ø12.28 mm; projection 31 mm, spline dimension 20 mm |
| SAE 10-tooth spline | 16/32 DP, 30° pressure angle; major Ø17.04 mm, minor Ø13.86 mm; projection 36 mm, spline dimension 25 mm |
Rotation: clockwise or counterclockwise versions, confirmed from the shaft-end view before manufacture. Photos show the four-tooth rectangular spline version; other shaft options are documented by the original drawing.
Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM production from approved samples and drawings. This listing groups the CBT3 / CBT-F300 oval-flange single pump style, ten catalogue displacement sizes and four documented shaft options. The photographs show an aluminium pump body, oval flange with mounting slots, side threaded ports and a four-tooth rectangular spline drive shaft.
The verified catalogue models are CBT-F304, CBT-F306, CBT-F308, CBT-F310, CBT-F312, CBT-F314, CBT-F316, CBT-F318, CBT-F320 and CBT-F322, corresponding to 4, 6, 8, 10, 12, 14, 16, 18, 20 and 22 mL per revolution. Search spellings include CBT3, CBT 3 series, CBT-F300 and CBT F300. These family and size references are grouped in one product; a complete order code must retain the selected mounting, port, shaft and rotation suffixes.
This photographed oval-flange style is distinct from the square-flange CBT-E3 listing. A matching CBT prefix alone does not establish the same pressure grade, mounting dimensions or shaft configuration. Do not combine suffix systems from different manufacturers without checking the applicable drawing.
The original drawing documents a plain keyed shaft, an H4 four-tooth rectangular spline, a 9-tooth SAE involute spline and a 10-tooth SAE involute spline. Their reference dimensions are listed in the technical section. Only the four-tooth version is illustrated by the sample photographs. The other shaft designs are drawing-supported options, not additional photographed samples.
Both SAE options use 16/32 diametral pitch and a 30-degree pressure angle, but their diameters and projections differ. Confirm tooth count, profile, engagement length and mating coupling. The keyed and rectangular spline dimensions must also be checked against the final approved drawing before manufacture.
The catalogue identifies the A oval pilot as 82.55 mm and A1 as 80 mm. The drawing shows the mounting-slot spacing and overall flange dimensions. Select the matching pilot and shaft specification for the installed equipment. The illustrated threaded-port pump and a flange-port configuration are separate connection choices; flange bore dimensions should not be used as thread specifications.
Specify clockwise or counterclockwise rotation as viewed from the shaft end. The catalogue describes clockwise omission in some ordering codes, so the full original marking and a confirmed rotation arrow should be supplied. Listing both directions does not establish that one supplied unit is a bidirectional pump.
The catalogue lists 20 MPa rated pressure and 25 MPa maximum pressure, optimum speed of 1500–2500 rpm and an operating range of 800–3000 rpm. Efficiency varies by displacement group as shown in the table. Actual output depends on speed, oil temperature, viscosity, pressure and leakage. Maximum pressure and maximum speed are not a guarantee of continuous simultaneous operation at both limits.
The series is described for agricultural and other mobile hydraulic machinery. No specific tractor, harvester, loader or forklift model is assigned without a verified equipment reference and matching installation dimensions. Send the original machine information and pump marking for an application review.
The reference photo carries the model marking CBT-F310-ALH and a separate numeric marking 181111001. The visible four-tooth shaft is consistent with the rectangular spline style; the catalogue calls its option H4, while the observed sample uses H. These suffixes are recorded separately and are not automatically treated as identical complete order codes. The numeric marking is a sample identification or traceability marking, not an independently verified equipment OEM material number.
No independent machine OEM part number or material-number cross-reference has been established for this specific photographed pump. The CBT-F3xx codes are pump model references. Provide an original equipment parts list or pump nameplate to verify an OEM number before ordering. Third-party product markings have been removed from the display photograph; mechanical features and the dimensional reference drawing are retained.
These are multilingual product search descriptions, not measured keyword-volume data or confirmed machine compatibility.
| Market / language | Search phrases |
|---|---|
| English — international buyers | CBT3 hydraulic gear pump; CBT-F300 oval flange pump; CBT-F310 four-tooth gear pump; CBT 9 tooth pump; CBT 10 tooth pump |
| Russia / Kazakhstan — Russian | CBT3 шестеренный насос; CBT-F300 гидравлический насос; насос CBT с четырёхзубым шлицевым валом |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica de engranajes CBT3; bomba CBT-F300 de brida ovalada; bomba CBT con eje estriado de 4 dientes |
| Egypt / Iraq — Arabic | مضخة تروس هيدروليكية CBT3؛ مضخة CBT-F300 بفلنجة بيضاوية؛ مضخة CBT بعمود مسنن بأربعة أسنان |
| Türkiye — Turkish | CBT3 hidrolik dişli pompa; CBT-F300 oval flanşlı pompa; CBT dört dişli yivli mil pompası |
| Brazil — Portuguese | bomba hidráulica de engrenagens CBT3; bomba CBT-F300 com flange oval; bomba CBT com eixo estriado de 4 dentes |
| Vietnam — Vietnamese | bơm bánh răng thủy lực CBT3; bơm CBT-F300 mặt bích ô van; bơm CBT trục then hoa 4 răng |
| Indonesia — Indonesian | pompa roda gigi hidrolik CBT3; pompa CBT-F300 flensa oval; pompa CBT poros spline 4 gigi |
| French-speaking markets | pompe hydraulique à engrenages CBT3; pompe CBT-F300 à bride ovale; pompe CBT à arbre cannelé 4 dents |
For a quotation, provide clear pump photographs, the complete original marking, displacement, operating pressure and speed, rotation, shaft dimensions, flange measurements, port specification and required quantity. Olive Branch Hydraulics can assess sample-based manufacture, drawing-based production and tooling requirements after technical review. Final dimensions, material specification, inspection requirements, marking and packaging are confirmed before production.
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Snowplow motor buying guide for contractors and fleets. Compare hydraulic vs electric, top brands, cold-weathe…
Vane pump vs gear pump: Compare efficiency, noise, cost & applications to find the best hydraulic pump for you…
Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.