CBT-E3 Agricultural Gear Pumps 4–25 Cc With Shaft And Port Options

1 / 3

CBT-E3 model and performance specifications

Base model Displacement (ml/rev) Rated pressure (MPa) Nominal speed (rpm) Catalogue minimum speed (rpm) Catalogue rated input power (kW)
CBT-E304 4 16 2000 1100 2.63
CBT-E306 6 16 2000 1100 3.95
CBT-E308 8 16 2000 900 5.27
CBT-E310 10 16 2000 900 6.58
CBT-E312 12 16 2000 900 7.90
CBT-E314 14 16 2000 900 9.22
CBT-E316 16 16 2000 900 10.53
CBT-E320 20 16 2000 900 13.17
CBT-E325 25 16 2000 900 16.46

Suffixes select the shaft, oil ports, rotation and front cover. The reference table does not establish a universal maximum pressure or speed. Confirm the complete assembly specification before ordering. Rated input-power figures are catalogue references.

Selection item Details
Pictured configuration Rectangular four-hole flange; threaded shaft ends with nuts; two side-port arrangements
Rotation L: counterclockwise; R: clockwise, viewed from shaft end. Select the required build; this does not imply a pump can reverse under load.
Housing Aluminium-alloy body; cover material and finish confirmed by approved drawing
Front-cover selection Four-hole cover codes 2 and 11 are distinguished in the series coding guide; verify which applies to the supplied pump
OEM / material number No universal equipment material number verified. Quote against full pump code, nameplate and drawing.
Applications Agricultural and other hydraulic systems; exact tractor or harvester fitment requires dimensional and circuit verification
Product Information

CBT-E3 gear pumps for agricultural hydraulic systems

Olive Branch Hydraulics is a Chinese hydraulic component manufacturer supporting OEM/ODM production, custom tooling and sample-based development. This page brings the CBT-E3 displacement range, shaft choices and oil-port arrangements together so buyers can specify a complete pump without navigating separate pages for each shaft. The approved photograph shows two examples with rectangular four-hole mounting flanges and shaft-end nuts. Their visible differences are primarily the oil-port arrangements; the photograph does not establish every shaft option or displacement.

Nine catalogue models and alternative names

The verified performance table covers CBT-E304, CBT-E306, CBT-E308, CBT-E310, CBT-E312, CBT-E314, CBT-E316, CBT-E320 and CBT-E325. Displacement ranges from 4 to 25 ml per revolution. The rated pressure in this table is 16 MPa and nominal speed is 2000 rpm. CBT-E3, CBT E3 and CBTE3 are family search terms. The following formatting variants help identify enquiries and must be completed with configuration suffixes before manufacture.

Base model Search names / formatting variants
CBT-E304 CBTE304 / CBT E304 / CBT E3-4
CBT-E306 CBTE306 / CBT E306 / CBT E3-6
CBT-E308 CBTE308 / CBT E308 / CBT E3-8
CBT-E310 CBTE310 / CBT E310 / CBT E3-10
CBT-E312 CBTE312 / CBT E312 / CBT E3-12
CBT-E314 CBTE314 / CBT E314 / CBT E3-14
CBT-E316 CBTE316 / CBT E316 / CBT E3-16
CBT-E320 CBTE320 / CBT E320 / CBT E3-20
CBT-E325 CBTE325 / CBT E325 / CBT E3-25

The coding illustration also mentions 18 ml/rev, but the referenced performance table does not provide a CBT-E318 row. That option requires separate technical confirmation. CBT-F3 denotes a different pressure-grade designation and is not treated as an equivalent ordering code for CBT-E3.

Shaft configurations in one product family

Catalogue shaft code Configuration
No shaft symbol Four-tooth rectangular spline
E Straight keyed shaft, catalogue diameter 18 mm
E1 Straight keyed shaft, catalogue diameter 16 mm
B / B1 Flat shaft variants, catalogue diameters 15 / 18 mm
H Nine-tooth involute spline, 16/32 DP
S / S3 Keyed tapered shaft variants
S1 / S2 Additional tapered shaft variants shown in the shaft-detail drawing; verify key and projection

These codes follow the referenced CBT-E3 selection guide and are not universal across manufacturers. The photographed nut-ended shafts do not demonstrate the spline, flat or straight-key variants. Use the shaft drawing to discuss the required geometry, then confirm diameter, taper, key size, projection and coupling engagement against the order drawing. Retain the complete suffix when requesting an exact configuration.

Oil ports, rotation and mounting

The series guide distinguishes F, F3 and F5 flange-port arrangements and S metric-threaded ports for the indicated cover configuration. It also distinguishes four-hole front-cover codes 2 and 11. Other mounting-cover references shown in the technical sheets identify separate geometries and are included only to explain the code system. Verify the pilot, bolt-hole spacing, cover thickness, port orientation and thread sizes for the selected rectangular-flange assembly.

Technical drawings and dimensional references

The gallery includes the original series coding illustration and shaft/dimension reference sheet. They are catalogue references rather than an approved manufacturing drawing. Some fine text has limited resolution, so use the typed tables for initial selection and request a clear order drawing before installation or tooling. Dimensions A and B below follow the letters used on the source sheet; they are not shaft diameters.

Four-hole front-cover code 2: catalogue A/B dimensions

Catalogue configuration pattern A (mm) B (mm)
CBT-E304***2 45.5 95
CBT-E306***2 47 98
CBT-E308***2 48.25 100.5
CBT-E310***2 49.75 103.5
CBT-E312***2 51.75 107.5
CBT-E314***2 52.85 109.7
CBT-E316***2 54.25 112.5
CBT-E320***2 57.25 118.5
CBT-E325***2 61.25 126.5

Asterisks are configuration placeholders, not literal characters to put on a purchase order. For front-cover code 11, the sheet lists A/B values from CBT-E306 through CBT-E325 matching the corresponding values above; it does not list a CBT-E304 code-11 row. Do not infer a missing configuration.

Equipment matching and manufacturing enquiries

CBT-E3 pumps are used in agricultural and other hydraulic systems. A base model alone does not prove compatibility with a particular tractor, harvester or power unit. Send the machine identification, existing pump nameplate, shaft-end photographs and mounting measurements for an application review. We record any verified equipment material number against the confirmed drawing instead of assigning an unverified universal part number.

For a quotation, specify model, quantity, rotation viewed from the shaft end, operating pressure, drive speed, fluid and required port arrangement. Send a dimensioned drawing or sample when an identical configuration is required. Custom shaft and cover development, sample inspection, production checks, packaging and lead time are agreed against the technical specification. Search terms: CBT-E3 agricultural gear pump, CBT E3 tractor hydraulic pump, CBTE3 hydraulic pump, four-hole flange gear pump, keyed tapered shaft pump, OEM ODM hydraulic pump manufacturer.

International Search Terms

These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.

Market / language Product search phrases
English — international buyers CBT-E3 hydraulic gear pump; CBT-E3 gear oil pump
Russia / Kazakhstan — Russian CBT-E3 шестеренный насос; CBT-E3 гидравлический насос
Mexico / Nicaragua / Latin America — Spanish bomba hidráulica de engranajes CBT-E3; bomba CBT-E3
Egypt / Iraq / Arabic-speaking markets مضخة تروس هيدروليكية CBT-E3
Türkiye — Turkish CBT-E3 hidrolik dişli pompa; CBT-E3 dişli pompa
Brazil — Portuguese bomba hidráulica de engrenagens CBT-E3
Vietnam — Vietnamese bơm bánh răng thủy lực CBT-E3
Indonesia — Indonesian pompa roda gigi hidrolik CBT-E3
French-speaking markets pompe hydraulique à engrenages CBT-E3

Model Identification And OEM Material Numbers

Search family reference: CBT-E3. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.

Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.

You May Also Like

Related Articles

Can A Gear Pump Be Reversed?

Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.