Orbital Motor Shaft Seal Looks Uneven? Check Before Fitting
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
| Model pattern | Displacement (mL/rev) | Catalogue outlet thread | L (mm) | Weight (kg) |
|---|---|---|---|---|
| CBNZB-F520-BL** | 20 | M22×1.5, depth 16 mm | 141 | 5.7 |
| CBNZB-F525-BL** | 25 | M22×1.5, depth 16 mm | 145 | 5.8 |
| CBNZB-F532-BL** | 32 | M22×1.5, depth 16 mm | 146 | 5.9 |
| CBNZB-F540-BL** | 40 | M27×2, depth 18 mm | 152 | 6.2 |
| CBNZB-F550-BL** | 50 | M27×2, depth 18 mm | 160 | 7.9 |
| CBNZB-F563-BL** | 63 | M27×2, depth 18 mm | 171 | 8.4 |
Rated pressure: 20 MPa. Maximum pressure: 25 MPa. Optimum speed: 1500–2500 rpm. Catalogue speed range: 600–3000 rpm. Volumetric efficiency: at least 92% across the listed range.
Square four-hole mounting: 90 mm pilot, 110 × 86 mm bolt pattern, four 11 mm holes. Rear-facing screw ports: inlet M33×2, depth 20 mm; outlet varies by model as listed. Shaft options: P plain key or H6a six-tooth rectangular spline. Complete configuration suffix and rotation require drawing confirmation.
Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM production, sample-based development and manufacture to approved drawings. The CBNZB-F5 family uses a square four-hole mounting arrangement and rear-facing threaded inlet and outlet connections. This listing groups six verified displacement choices for the selected body style, with plain keyed and rectangular-spline shaft options.
The two real product photographs show the overall pump and shaft-end arrangement. They illustrate a rectangular-spline shaft configuration; the keyed shaft is documented in the original installation drawing supplied in the gallery. Body length varies with displacement. The photos are configuration references rather than separate photographs of every model and rotation.
| Model pattern | Displacement (mL/rev) | Catalogue outlet thread | L (mm) | Weight (kg) |
|---|---|---|---|---|
| CBNZB-F520-BL** | 20 | M22×1.5, depth 16 mm | 141 | 5.7 |
| CBNZB-F525-BL** | 25 | M22×1.5, depth 16 mm | 145 | 5.8 |
| CBNZB-F532-BL** | 32 | M22×1.5, depth 16 mm | 146 | 5.9 |
| CBNZB-F540-BL** | 40 | M27×2, depth 18 mm | 152 | 6.2 |
| CBNZB-F550-BL** | 50 | M27×2, depth 18 mm | 160 | 7.9 |
| CBNZB-F563-BL** | 63 | M27×2, depth 18 mm | 171 | 8.4 |
Displacement in mL/rev is numerically equal to cc/rev. Catalogue lengths and weights apply to the illustrated configuration; the complete assembly drawing controls final installation. Model patterns contain configuration placeholders and must be completed before ordering.
Customer search descriptions include CBNZB-F5 gear pump, CBNZB rear-port hydraulic pump, CBNZB square-flange gear pump and CBNZB rear inlet rear outlet pump. Base models are CBNZB-F520, CBNZB-F525, CBNZB-F532, CBNZB-F540, CBNZB-F550 and CBNZB-F563. Spacing variants such as CBNZB F520 and CBNZBF520 refer to the same written base designation, subject to the full configuration.
The catalogue uses patterns such as CBNZB-F520-BL**. F denotes the listed 20 MPa pressure grade, 5 identifies the series, and 20 denotes displacement for this example. B identifies square mounting and L identifies screw ports. P identifies the plain keyed shaft and H6a the rectangular spline. Rotation L is counterclockwise; clockwise R is normally omitted. The asterisks are placeholders, not a literal complete part number. Confirm direction as viewed from the shaft end.
No separate machine OEM material number or exact tractor, harvester or loader fitment has been verified for these catalogue configurations. A matching series prefix from another manufacturer does not establish interchangeability.
The listed range has rated pressure of 20 MPa, maximum pressure of 25 MPa, optimum speed of 1500–2500 rpm and catalogue operating range of 600–3000 rpm. Listed volumetric efficiency is at least 92% across the selected models. Maximum pressure is a catalogue limit, not a continuous-duty recommendation. Actual flow depends on displacement, speed, pressure, oil condition and temperature.
Choose the displacement against the required circuit flow and available drive power. Verify operating pressure, inlet conditions, oil temperature and duty cycle before confirming an assembly.
| Feature | Original drawing reference |
|---|---|
| Mounting flange | 134 × 110 mm upper flange outline; four 11 mm holes on a 110 × 86 mm pattern |
| Pilot | Nominal diameter 90 mm |
| P plain keyed shaft | Nominal diameter 25 mm; key width 8 mm; projection reference 40 mm |
| H6a rectangular spline | Six-tooth form; nominal major diameter 25 mm, minor reference 20.1 mm, tooth width 6 mm; projection reference 35 mm |
Drawing tolerances control pilot and shaft fit. Both documented shaft choices are grouped on this page, but they require matching couplings. The photographs establish the rectangular-spline appearance only. No additional shaft form is claimed from an unrelated pump image.
The original rear view shows the inlet and outlet together on the rear cover. The inlet is M33×2, depth 20 mm, with a 50 mm spotface. For 20, 25 and 32 mL/rev versions, the catalogue outlet is M22×1.5, depth 16 mm, with a 35 mm spotface. For 40, 50 and 63 mL/rev versions, it is M27×2, depth 18 mm, with a 45 mm spotface.
The drawing includes inlet sealing geometry and different port sizes. Confirm fittings, sealing faces, thread engagement, rotation and rear installation clearance on the approved assembly drawing. Do not select a fitting solely from a pump name or assume that a side-port version has the same installation envelope.
The catalogue describes a high-strength aluminium-alloy housing with axial clearance compensation, radial balancing and self-lubricating bearings. The family can be evaluated for agricultural and other mobile hydraulic machinery where the mounting, drive and rear-port layout match. Exact equipment fitment requires the original marking, displacement, pressure, shaft, ports and rotation; no unsupported machine brand or model is assigned.
Send the complete pump nameplate, clear front and rear photographs, required displacement, operating pressure and speed, rotation, shaft measurements, pilot and bolt dimensions, and port details. Olive Branch Hydraulics can evaluate your original sample or drawing and confirm a manufacturing specification. An exact new configuration may require a sample and tooling.
Customer search keywords: CBNZB F520 F525 F532 hydraulic gear pump, CBNZB F540 F550 F563 pump, rear port gear pump, rear inlet rear outlet hydraulic pump, square flange keyed shaft pump, six tooth rectangular spline pump, China agricultural hydraulic pump manufacturer.
These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.
| Market / language | Product search phrases |
|---|---|
| English — international buyers | CBNZB-F5 hydraulic gear pump; CBNZB-F5 gear oil pump |
| Russia / Kazakhstan — Russian | CBNZB-F5 шестеренный насос; CBNZB-F5 гидравлический насос |
| Mexico / Nicaragua / Latin America — Spanish | bomba hidráulica de engranajes CBNZB-F5; bomba CBNZB-F5 |
| Egypt / Iraq / Arabic-speaking markets | مضخة تروس هيدروليكية CBNZB-F5 |
| Türkiye — Turkish | CBNZB-F5 hidrolik dişli pompa; CBNZB-F5 dişli pompa |
| Brazil — Portuguese | bomba hidráulica de engrenagens CBNZB-F5 |
| Vietnam — Vietnamese | bơm bánh răng thủy lực CBNZB-F5 |
| Indonesia — Indonesian | pompa roda gigi hidrolik CBNZB-F5 |
| French-speaking markets | pompe hydraulique à engrenages CBNZB-F5 |
Search family reference: CBNZB-F5. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.
Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Snowplow motor buying guide for contractors and fleets. Compare hydraulic vs electric, top brands, cold-weathe…
Vane pump vs gear pump: Compare efficiency, noise, cost & applications to find the best hydraulic pump for you…
Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.