CBN300 Square-Flange Hydraulic Gear Pumps With Multiple Shaft Options

1 / 4
Item Specification
Manufacturer Olive Branch Hydraulics
Series CBN300 / CBN-300 single external gear pump
Construction Aluminium body, square four-hole mounting flange
Displacement references 304: 4; 306: 6; 310: 10; 314: 14; 316: 16; 320: 20; 325: 25 cm³/rev
Shaft selection Plain keyed and splined configurations; flat-end and tapered-key enquiries assessed against the required drawing
Rotation Confirm clockwise or counterclockwise from the drive-shaft end
Ports Side port arrangement; confirm thread or flange connection dimensions
Application Tractor, harvester and agricultural auxiliary hydraulic circuits, subject to verified installation requirements
OEM part number Use the complete original pump marking and machine reference; assigned per confirmed application
OEM/ODM Sample-based development, shaft and mounting assessment, tooling evaluation and private-label packing
Product Information

CBN300 square-flange gear pumps with multiple shaft options

Olive Branch Hydraulics manufactures hydraulic gear pumps for agricultural and mobile equipment. This product group brings together the illustrated CBN300 body style and its shaft configurations, allowing distributors to discuss the pump size and drive connection on one page.

The illustrated construction has a silver aluminium body, square four-hole mounting flange and side oil ports. The gallery shows a straight keyed shaft and a splined configuration. Select the shaft to match the drive coupling, then confirm the mounting and port dimensions before ordering.

Model and displacement references

Model size Nominal displacement, cm³/rev
CBN-304 4
CBN-306 6
CBN-310 10
CBN-314 14
CBN-316 16
CBN-320 20
CBN-325 25

These are size references, not complete assembly numbers. Retain pressure letters and all suffixes from the original nameplate. Common search spellings include CBN300 gear pump, CBN-300 hydraulic pump, CBN314 pump, CBN316 pump and CBN320 agricultural hydraulic pump. Other marked sizes can be assessed from a sample or complete drawing.

Shaft options within one product group

Drive connection Information needed for selection
Straight cylindrical keyed shaft Shaft diameter, projection, key width, key height and key length
Splined shaft Tooth count, major and minor diameters, spline profile and working length
Flat-end shaft enquiry Flat thickness, width, engagement length and mating drive dimensions
Tapered-key shaft enquiry Taper, end diameter, key dimensions and retaining thread

Flat-end and tapered-key executions require drawing approval for this mounting style. The photographed splined shaft must be identified by its measured profile; the gallery does not establish a universal tooth count. A 16 mm shaft and an 18 mm shaft also require separate dimensional confirmation within the same product group.

Operating requirements and machine fitment

Specify continuous and peak circuit pressure, operating speed, oil viscosity and temperature. Pressure and speed limits depend on displacement and the selected execution. Theoretical flow in litres per minute equals displacement in cm³/rev multiplied by shaft speed and divided by 1,000. For example, 14 cm³/rev at 1,000 rpm gives 14 L/min before leakage losses.

Potential uses include tractor lifting circuits, harvester auxiliary hydraulics and agricultural hydraulic power units. Machine-specific compatibility and OEM material numbers are confirmed from the installed pump and equipment details. Supply the complete pump code, equipment model, rotation arrow and clear photographs of both ports and the shaft end.

Manufacturing and quotation

For OEM/ODM enquiries, send a sample or a complete dimensional drawing together with the required quantity. We will evaluate the housing, drive shaft, flange, port layout and sealing arrangement, then agree the technical specification and inspection requirements. Private-label identification and export packing can be discussed with the order.

The product photographs are reference views of the illustrated body style and shaft configurations, with third-party markings removed. They do not represent a separate photographed unit for every displacement. The approved order drawing defines the supplied pump dimensions and performance.

Frequently asked questions

Can different shafts be ordered under this product group?

Yes. Specify the required drive connection and provide its dimensions. Each shaft configuration is confirmed in the quotation and order drawing.

Can rotation be identified from the photo alone?

No. Provide the shaft-end viewing direction and original rotation marking so that the correct execution can be confirmed.

Are pumps with the same CBN314 marking always identical?

No. Compare the complete marking, shaft, mounting pilot, bolt centres and oil ports before selecting the assembly.

Model size names and customer search spellings

The following search forms refer to size identifiers from this product group. They do not replace a full pressure, mounting, shaft, port and rotation code.

Series size Spacing / punctuation search forms Displacement cm³/rev
CBN-304 CBN304; CBN 304 4
CBN-306 CBN306; CBN 306 6
CBN-310 CBN310; CBN 310 10
CBN-314 CBN314; CBN 314 14
CBN-316 CBN316; CBN 316 16
CBN-320 CBN320; CBN 320 20
CBN-325 CBN325; CBN 325 25

Series and product names

Series searches: CBN300, CBN-300, CBN3, CBN-3 and CBN 300. Chinese: CBN300方形法兰齿轮泵、CBN四孔法兰液压泵、CBN平键轴齿轮泵、CBN花键轴齿轮泵、农机液压油泵。 English: CBN300 square-flange hydraulic gear pump; CBN four-bolt mounting gear pump; CBN keyed-shaft gear pump; CBN splined-shaft hydraulic pump; tractor auxiliary hydraulic oil pump.

Pressure letters and shaft variants

Customers may enquire using CBN-E300, CBN-F300 or CBN-G300 family notation. These pressure-class names are not interchangeable assembly numbers. Supply the full original marking, including all suffixes, before selection. Plain key shaft, straight keyed shaft, cylindrical keyed shaft and 平键轴 describe the keyed connection. Spline shaft, splined drive and 花键轴 describe a splined connection; tooth count and profile remain essential. Flat shaft, flat-end shaft, tang drive and 扁键/扁口轴 are enquiry terms requiring a matching drawing. Tapered shaft and taper-key shaft also require dimensional approval.

Confirm 16 mm or 18 mm shaft diameter, key or spline dimensions and rotation for every configuration. Manufacturer-specific code letters must be read from the original catalogue; do not infer a complete order code by combining generic options. CBT, CBW and CBN500 are separate series and are not alternate names for this pump.

International Search Terms

These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.

Market / language Product search phrases
English — international buyers CBN300 square-flange hydraulic gear pump
Russia / Kazakhstan — Russian CBN300 шестеренный насос с квадратным фланцем
Mexico / Nicaragua / Latin America — Spanish bomba de engranajes con brida cuadrada CBN300
Egypt / Iraq / Arabic-speaking markets مضخة تروس هيدروليكية بفلنجة مربعة CBN300
Türkiye — Turkish CBN300 kare flanşlı hidrolik dişli pompa
Brazil — Portuguese bomba de engrenagens com flange quadrado CBN300
Vietnam — Vietnamese bơm bánh răng thủy lực mặt bích vuông CBN300
Indonesia — Indonesian pompa roda gigi hidrolik flensa persegi CBN300
French-speaking markets pompe hydraulique à engrenages à bride carrée CBN300

Model Identification And OEM Material Numbers

Search family reference: CBN300 square flange. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.

Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.