What Is a Hydraulic Gear Pump? A Plain-English Guide for Industry Pros
Discover how hydraulic gear pumps work, why they still dominate industry, and key components to watch when spe…
| Item | Specification |
|---|---|
| Manufacturer | Olive Branch Hydraulics |
| Product group | CBN-F300 diamond-flange single external gear pump |
| Displacements | 4.5, 6, 8, 10, 12, 14 and 16 cm³/rev |
| Nominal pressure reference | 20 MPa / 200 bar; final rating subject to the approved pump specification |
| Maximum pressure reference | 25 MPa / 250 bar for CBN-F304.5 through CBN-F314.0; CBN-F316.0 peak rating requires confirmation |
| Speed reference | Rated 2,000 rpm; maximum 3,000 rpm, subject to operating conditions |
| Rotation reference | Left-hand catalogue configuration; confirm arrow and shaft-end viewing direction |
| Mounting | Diamond cover with two opposing open mounting slots; confirm pilot and mounting centres |
| Shaft | Splined configuration shown; tooth count, profile and shaft dimensions confirmed per order |
| Ports | Side oil ports; confirm inlet/outlet identification, connection type and dimensions |
| Applications | Agricultural auxiliary hydraulic systems; specific machine fitment requires verification |
| OEM / material number | Confirmed against the original nameplate, machine model and approved drawing |
Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM development for agricultural and mobile hydraulic equipment. This product page groups the CBN-F300 diamond-cover style by displacement, keeping the model selection and drive requirements together for distributors and equipment service businesses.
The approved product reference images show the overall housing, rear cover and shaft-end mounting face. Use these views to compare the installation with the existing pump before sending an enquiry. The exact shaft, locating pilot and port connection must match the approved assembly drawing.
| Catalogue model | Displacement, cm³/rev |
|---|---|
| CBN-F304.5 | 4.5 |
| CBN-F306.0 | 6 |
| CBN-F308.0 | 8 |
| CBN-F310.0 | 10 |
| CBN-F312.0 | 12 |
| CBN-F314.0 | 14 |
| CBN-F316.0 | 16 |
Search enquiries may omit the trailing decimal, for example CBN-F306, CBN-F308, CBN-F310, CBN-F312, CBN-F314 or CBN-F316. These abbreviated spellings help identify a size; they do not establish an identical mounting or drive connection. Preserve the complete marking and all suffixes when requesting a quotation.
The photographs show a splined drive. Send the spline tooth count, major diameter, minor diameter and engagement length for confirmation. Keyed, flat-end or other shaft enquiries for this body style can be evaluated against a sample or dimensional drawing and remain within this product group after technical confirmation.
A similar outside appearance does not establish that two shafts fit the same coupling. For a keyed shaft, provide its diameter, projection and key dimensions. For a flat-end shaft, provide the flat thickness and engagement dimensions. Do not select a drive from the CBN designation alone.
Record the mounting pilot diameter, slot spacing, flange thickness, clearance around the pump and both oil-port dimensions. Confirm the rotation arrow from the drive-shaft end and identify the inlet and outlet before connecting the hydraulic lines. Provide the continuous working pressure, peak pressure, speed range, oil type and operating temperature with the enquiry.
For a first flow estimate, multiply displacement in cm³/rev by shaft speed in rpm and divide by 1,000. A 10 cm³/rev selection at 1,000 rpm provides a theoretical 10 L/min before leakage. Actual output and drive-power requirements depend on the agreed operating conditions.
This group can be assessed for tractor and harvester auxiliary hydraulic circuits and agricultural hydraulic power units. A specific machine model or OEM material number is confirmed from technical evidence for each enquiry. Send photographs of the installed pump, its full identification and the mating coupling so that the configuration can be checked before production.
For custom manufacture, provide an original sample or a complete drawing together with the required quantity. We will evaluate the body, shaft, mounting and oil connections, then agree the inspection scope, identification and packing requirements. Sample testing and tooling arrangements are confirmed for the project.
The images are product reference views of this mounting style and the illustrated shaft configuration. Housing length can vary with displacement, and the images do not represent individual photographs of every listed size. Final dimensions and performance are defined in the approved order specification.
Yes. State the quantity and complete technical requirements for each configuration so that each shaft execution can be confirmed separately within the same product group.
No. Provide its full marking, mounting dimensions, shaft measurements, oil connections and rotation.
Yes. Contact Olive Branch Hydraulics with clear photographs, dimensions and the quantity required to start the manufacturing assessment.
This guide maps the seven catalogue sizes to shortened or punctuation-free enquiry spellings. These are search forms for identifying a size, not additional certified assembly numbers.
| Catalogue model | Short spelling | Spacing / punctuation search forms | Displacement cm³/rev |
| CBN-F304.5 | CBN-F304.5 | CBNF304.5; CBN F304.5; CBN F 304.5 | 4.5 |
| CBN-F306.0 | CBN-F306 | CBNF306; CBN F306; CBN F 306 | 6 |
| CBN-F308.0 | CBN-F308 | CBNF308; CBN F308; CBN F 308 | 8 |
| CBN-F310.0 | CBN-F310 | CBNF310; CBN F310; CBN F 310 | 10 |
| CBN-F312.0 | CBN-F312 | CBNF312; CBN F312; CBN F 312 | 12 |
| CBN-F314.0 | CBN-F314 | CBNF314; CBN F314; CBN F 314 | 14 |
| CBN-F316.0 | CBN-F316 | CBNF316; CBN F316; CBN F 316 | 16 |
Chinese: CBN-F300菱形盖齿轮泵、CBN300菱形法兰齿轮泵、CBN花键轴液压油泵、CBN农机齿轮泵。 English: CBN-F300 diamond-flange gear pump; CBN300 diamond-cover hydraulic pump; CBN splined-shaft hydraulic gear pump; agricultural hydraulic oil gear pump.
Series-level enquiries may use CBN300, CBN-300, CBN3, CBN-3, CBN-F300 or CBN F300. These names identify a broad family; match the flange, shaft, ports and rotation before choosing an assembly.
Include the complete nameplate code when ordering. Pressure letters, mounting codes, shaft codes, port codes and left/right rotation suffixes vary by manufacturer. R/L or CW/CCW in an enquiry must be checked against the manufacturer convention and shaft-end viewing direction. CBN-E and CBN-G pressure classes, and CBT or CBW series, are not alternate names for the illustrated CBN-F assembly. The 4 cm³/rev CBN-F304 is not the 4.5 cm³/rev CBN-F304.5.
These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.
| Market / language | Product search phrases |
|---|---|
| English — international buyers | CBN-F300 diamond-flange hydraulic gear pump |
| Russia / Kazakhstan — Russian | CBN-F300 шестеренный насос с ромбовидным фланцем |
| Mexico / Nicaragua / Latin America — Spanish | bomba de engranajes con brida romboidal CBN-F300 |
| Egypt / Iraq / Arabic-speaking markets | مضخة تروس هيدروليكية بفلنجة معينية CBN-F300 |
| Türkiye — Turkish | CBN-F300 eşkenar dörtgen flanşlı hidrolik dişli pompa |
| Brazil — Portuguese | bomba de engrenagens com flange losangular CBN-F300 |
| Vietnam — Vietnamese | bơm bánh răng thủy lực mặt bích hình thoi CBN-F300 |
| Indonesia — Indonesian | pompa roda gigi hidrolik flensa belah ketupat CBN-F300 |
| French-speaking markets | pompe hydraulique à engrenages à bride losange CBN-F300 |
Search family reference: CBN-F300 diamond flange. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.
Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.
Discover how hydraulic gear pumps work, why they still dominate industry, and key components to watch when spe…
Skip priming and your gear pump dies in seconds. Learn the 5-minute procedure that prevents scoring, cavitatio…
Compare the most trusted hydraulic gear pump brands with a data-driven ranking built for procurement teams who…
Engineer's guide to selecting a hydraulic gear pump for crane duty: pressure, displacement, MTBF, and the 4 sp…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.