Orbital Motor Shaft Seal Looks Uneven? Check Before Fitting
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
| Model | Displacement (mL/rev) | L1 / L (mm) | Reference weight (kg) |
|---|---|---|---|
| CBHZA-F23-ALΦ10* | 23 | 60.5 / 117 | 4.1 |
| CBHZA-F25-ALΦ10* | 25 | 62 / 120 | 4.3 |
| CBHZA-F28-ALΦ10* | 28 | 64 / 124 | 4.6 |
| CBHZA-F32-ALΦ10* | 32 | 66 / 128 | 5 |
| CBHZA-F36-ALΦ10* | 36 | 68.5 / 133 | 5.4 |
Rated pressure: 20 MPa. Maximum pressure: 25 MPa. Preferred speed: 1500–2500 rpm. Published operating range: 800–3000 rpm. Minimum catalogue volumetric efficiency: 92%.
| Interface | Drawing reference |
|---|---|
| Mounting | A oval flange; Ø82.55 mm pilot; 106 mm mounting-slot centres; two 11 mm open slots; overall flange width 130 mm |
| Drive shaft | SAE 10-tooth spline; 16/32 diametral pitch; 30° pressure angle; major Ø17.04 mm; minor Ø13.8 mm; shaft projection 36 mm; spline length 25 mm |
| Inlet | G3/4 thread, depth 18 mm |
| Outlet | G1/2 thread, depth 16 mm |
| Body | Ductile cast iron pumping-section housing |
| Rotation | L: counterclockwise; clockwise suffix omitted in catalogue. Confirm direction viewed from the shaft end. |
L1 and L are defined in the original installation drawing. Dimensions and weights are catalogue references; confirm the selected execution, fits and final production drawing before ordering.
Olive Branch Hydraulics offers manufacturing and OEM/ODM support for the CBHZA single-section gear pump family. This page groups five documented displacements in the same external body style: 23, 25, 28, 32 and 36 mL/rev. The catalogue configuration uses an oval mounting flange, threaded oil ports and an SAE 10-tooth spline shaft.
The listed model family comprises CBHZA-F23-ALΦ10, CBHZA-F25-ALΦ10, CBHZA-F28-ALΦ10, CBHZA-F32-ALΦ10 and CBHZA-F36-ALΦ10, followed by the specified rotation suffix where applicable. The spline symbol may be rendered as Φ, Ø, 0 or O in catalogue text, producing spellings such as AL010 and ALO10. Treat these as typography references and verify the complete original nameplate and drawing before ordering.
Common descriptions include CBHZA hydraulic gear pump, CBHZA single gear pump, oval-flange threaded-port gear pump and 10-tooth spline hydraulic pump. Pressure code F denotes the 20 MPa rated grade, A the oval mounting flange, L the threaded-port connection and Φ10 the documented shaft. Only the SAE 10-tooth execution is verified in this catalogue; additional shaft options require a separate drawing or sample review.
General catalogue application categories include agricultural machinery, loaders, forklifts, cranes and other mobile hydraulic equipment. These categories do not confirm fitment to a specific tractor, harvester, loader or engine. Identify the original pump using the nameplate, equipment details and measured interfaces. Match displacement, rotation, shaft engagement, mounting pilot, bolt pattern and port threads as a complete configuration.
The reference drawing in the gallery shows the inlet and outlet thread details and spline specification. Catalogue dimensions and weights refer to the listed displacement models. Confirm the approved production drawing before manufacture. Maximum pressure is not an unrestricted continuous working rating; confirm the required duty cycle, operating speed and circuit protection settings.
No equipment-manufacturer OEM material number or machine-specific part-number cross-reference has been verified for these five models. CBHZA-F23 through CBHZA-F36 are pump model designations, not verified OEM material numbers. Send the original part number, clear nameplate photographs, equipment brand and model, interface measurements and required rotation for identification.
The gallery contains two product views with other manufacturer markings removed, plus the original dimension drawing. Images illustrate the body style; the final configuration is confirmed by the agreed technical specification. Olive Branch Hydraulics is a hydraulic-component manufacturer supporting OEM/ODM projects, sample-based manufacture and tooling development. Provide quantity, pressure, speed and complete interface requirements for review and quotation. Exact sample replication is evaluated using the physical sample and agreed technical requirements.
These suggested product identification phrases cover different languages and markets. They are not measured search-volume or ranking data. Combine the family name with the exact displacement and confirmed configuration.
| Language / market | Suggested search phrases |
|---|---|
| English | CBHZA gear pump; CBHZA-F23 F25 F28 F32 F36; oval flange hydraulic pump; SAE 10 tooth shaft; 23 25 28 32 36 cc |
| Russian — Russia / Kazakhstan | CBHZA шестерённый гидронасос; овальный фланец; вал 10 шлицев; 23 25 28 32 36 см³ |
| Spanish — Nicaragua / Mexico / Latin America | CBHZA bomba hidráulica de engranajes; brida ovalada; eje de 10 dientes; 23–36 cm³ |
| Arabic — Egypt / Iraq | CBHZA مضخة تروس هيدروليكية؛ فلنجة بيضاوية؛ عمود 10 أسنان؛ 23–36 سم³ |
| Turkish | CBHZA hidrolik dişli pompa; oval flanş; 10 dişli mil; 23–36 cm³ |
| Portuguese — Brazil | CBHZA bomba hidráulica de engrenagens; flange oval; eixo de 10 dentes; 23–36 cm³ |
| Vietnamese | CBHZA bơm thủy lực bánh răng; mặt bích ô van; trục then hoa 10 răng; 23–36 cm³ |
| Indonesian | CBHZA pompa hidrolik roda gigi; flensa oval; poros spline 10 gigi; 23–36 cc |
| French | CBHZA pompe hydraulique à engrenages; bride ovale; arbre 10 cannelures; 23–36 cm³ |
Orbital motor shaft seal looks uneven? Learn what photos to send, how to check the drawing, and what to verify…
Can gear pumps run in reverse? Learn how bidirectional gear pump operation works, key design differences, and…
Vane pump vs gear pump: Compare efficiency, noise, cost & applications to find the best hydraulic pump for you…
Discover if gear pumps can safely run in reverse. Learn about bidirectional operation, seal design, and key tr…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.