Como Funciona uma Bomba de Engrenagem Tandem?
As bombas de engrenagem tandem fornecem fluxo independente a partir de um único eixo. Saiba como as bombas de…
| Parameter | Specification |
|---|---|
| Part number | A45E7-10202 |
| Pump type | Tandem gear pump |
| Catalog notation | 36R/4R |
| Listed application | Selected Viper 5–10T configurations |
| MOQ (stocked models) | 1 piece |
| Lead time (stocked models) | 3–5 business days |
| Inspection | 100% final inspection before packaging |
| Warranty | One year, terms per written quotation |
| Incoterm | EXW Hebei, China |
| Customization | P/T port configurations, OEM builds to approved drawing |
The A45E7-10202 tandem hydraulic gear pump is a two-section replacement pump, catalogued as 36R/4R and listed for selected Viper 5–10T configurations. It is supplied against the original part number and an approved drawing, not a brand cross-reference chart.
A typical cross-reference sends the same pump body to every machine that shares a brand or series name. On a tandem unit, that approach can go wrong in three places: section order, port positions and the mounting interface. If any of them differs from the pump being replaced, the pump arrives in good condition and still cannot be fitted.
Each A45E7-10202 is matched from the original product code, the machine model and the equipment details. Before shipment, the build is checked section by section against a drawing you have approved. Brand names and model numbers appear on this page only to identify the replacement. Interchangeability is confirmed by the complete assembly code.
Three pieces of information settle most interchangeability questions before a quote is issued.
Start with the original product code, A45E7-10202, exactly as it appears on the old pump or in the parts book. Add the machine model, the serial range where available, and any equipment details that affect the hydraulic circuit, such as mast type or attachments. A clear photo of the nameplate and a second photo of the port side let us read stamped codes and check port layout. The photos also catch digits that are often lost when a part number is retyped.
Two pumps can share a brand reference and still differ in shaft, flange, rotation or port orientation. For that reason we match each replacement against the complete assembly code and the machine data, item by item, and we do not rely on the series name alone. If the code on your pump has a suffix or revision letter that differs from A45E7-10202, send it as well. That detail can change which build is correct.
The listed data identifies the pump. Dimensional detail comes from the approved drawing.
We publish no pressure, flow or displacement ratings here. Those values are confirmed for your build and stated in the drawing and quotation documents.
Part number
A45E7-10202
Pump type
Tandem gear pump
Catalog notation
36R/4R
Listed application
Selected Viper 5–10T configurations
Dimensions, port sizes and mounting
As per approved drawing
Section order and port positions
Verified against approved drawing before shipment
Only the Viper 5–10T configurations are listed. Fit on any other machine is confirmed case by case.
This is the application listed for A45E7-10202. Fit still depends on the specific configuration, so the machine model and equipment details are checked before the order is confirmed.
Forklifts and similar lift trucks often use tandem gear pumps to supply lift and steering from one drive. Fit outside the listed Viper range is confirmed by matching the original part number and equipment data.
Tractor hydraulic circuits use a wide variety of tandem gear pumps. We match a tractor application only after checking the original code and drawing. A shared catalog notation alone is not enough.
Compact construction equipment can use similar two-section layouts but different mounting flanges and shafts. Each application is verified against the original assembly before it is quoted.
Workshops and parts distributors can quote A45E7-10202 as a replacement line, with interchangeability confirmed by the complete assembly code for each end customer.
Tandem replacements that fail at installation usually fail for mechanical reasons. The front and rear sections are reversed, so the larger section ends up on the wrong circuit. Pressure and tank ports can be rotated relative to the original, which forces the hoses to be rerouted. The flange, pilot or shaft may not mate with the drive. None of these faults appears on a part-number match alone.
For this pump, the section order, port positions and mounting interface are checked against the drawing you approved. They are not checked against a general catalogue specification. Any deviation is corrected before the batch ships, not after it arrives at your warehouse. The approved drawing also becomes the reference for repeat orders of the same build.
Every unit receives a final inspection before it is packed. The quotation agrees the inspection scope, which can include dimensional checks, leak inspection and pressure or flow testing where applicable, and it lists the documents supplied with the shipment. The pump carries a one-year warranty, and the exact coverage terms are set out in the written quotation.
Fit is decided at the bench against the drawing, before the pump is packed.
The standard replacement follows the original part. Custom builds start from a drawing that you approve.
This build is matched to the original A45E7-10202 assembly code and machine data. It suits like-for-like repairs where the existing hoses and mounting stay unchanged.
Distributors can specify pressure and tank port positions to suit their regional fleet or their stock policy. Changing the port layout produces a new build, so it is drawn and approved separately from the standard part.
Design drafts and 3D renders are sent for your approval before any sample is made. Layout or interface changes are made at this drawing stage, where they cost less than changes to a finished sample.
OEM builds are produced on tooling made to your approved drawing. Later batches use the same tooling, so dimensions stay consistent from one order to the next.
Quantities from each order are added to a running total. Once the agreed quantity is reached, the full tooling fee is refunded. The refund threshold is fixed in writing before tooling begins.
The written quotation fixes all commercial terms before production starts.
The MOQ is 1 piece, and stocked models ship within 3–5 business days.
MOQ and lead time depend on the confirmed configuration and order quantity. Both are stated in the quotation and fixed before tooling begins.
Goods are supplied EXW Hebei, China, and handed over at the manufacturer's facility.
Payment terms are confirmed in the written quotation.
The quotation lists unit pricing by quantity tier, the tooling fee, the refund quantity, the warranty terms and the EXW terms.
Send the part number or original product code, the quantity you need, your destination port, and the machine model and equipment details. For a custom build, attach your drawing or your P/T port requirements. You will receive a matched quotation within 24 hours.
As bombas de engrenagem tandem fornecem fluxo independente a partir de um único eixo. Saiba como as bombas de…
Trocando a bomba de engrenagens tandem de uma retroescavadeira? Teste pressão e vazão primeiro e confira se as…
Descubra como funcionam as bombas hidráulicas de engrenagem, por que ainda dominam a indústria e os componente…
Compare as marcas de bombas de engrenagens hidráulicas mais confiáveis com uma classificação baseada em dados,…
Entre em contato agora para obter uma solução profissional e um orçamento rápido.
Fill in your info to start a conversation.