84263360 Hydraulic Gear Pump For New Holland And Case IH Tractors

1 / 6
Item Catalogue reference and verification
Main part number 84263360
Earlier catalogue references 47135548, 87319386, 87319389
Reference displacement 25.67 cm³/rev (CNH catalogue)
Reference continuous pressure and speed 210 bar maximum continuous pressure and 3,000 rpm at maximum working pressure (CNH catalogue). Final specifications are agreed during development.
Equipment examples Selected New Holland and Case IH tractors, including catalogue-listed Puma 115/125 and Magnum 180/190/210 configurations. Confirm model, serial and transmission.
Drive and fitment checks Verify shaft spline, pilot diameter, flange hole centres, port configuration and rotation with the sample or approved drawing.
Development Dedicated tooling is required. The quotation sets out the upfront tooling fee and the cumulative purchase quantity that qualifies for a full refund.
Product Information

84263360 Hydraulic Gear Pump for New Holland and Case IH Tractors

The 84263360 hydraulic gear pump is developed against the CNH reference of 25.67 cm³/rev and 3000 rpm maximum speed, then built to your original sample or approved drawing.

On a Case IH Puma or Magnum doing loader and three-point hitch work, a worn gear pump usually shows up first as slow lift and weak auxiliary response once the oil is hot. Before you order, you need to know which pump is fitted. The part number on the old unit, the tractor serial and the transmission type decide that.

We match the configuration of the 84263360 gear pump to a physical sample or a drawing you approve, so the shaft end, flange, ports and rotation follow your unit and not a generic catalogue picture. Goods are supplied EXW Hebei, China, in neutral, white-label or custom packaging.

Reference data — 25.67 cm³/rev displacement and 3000 rpm maximum speed, as listed by CNH.

Development basis — Original sample or approved drawing review before any tooling is made.

3000rpm

CNH reference maximum speed

25.67cm³/rev

CNH reference displacement

84263360 Hydraulic Gear Pump Built to Your Approved Drawing or Sample

Distributors, OEM buyers and private-label brand owners use this product for one CNH reference: 84263360. Each pump is configured from the factory in Hebei against an original sample or a drawing that has passed our review. Quotations are issued EXW Hebei. Sample evaluation comes before volume orders.

The CNH catalogue photos are provided for identification. Olive Branch Hydraulics develops this pump to the agreed configuration after reviewing your sample or drawing.

How to Identify the 84263360 Gear Pump on Your Tractor: Current and Earlier CNH References

84263360 is the current CNH reference. The three numbers below appear in earlier catalogues.

A matching number on its own does not confirm fit. Compare the nameplate and the physical pump with the tractor serial before you request a quote.

CNH reference Catalogue status What to verify
84263360 Current reference Nameplate on pump, tractor serial number
47135548 Earlier catalogue reference Old unit in hand, tractor serial number
87319386 Earlier catalogue reference Old unit in hand, tractor serial number
87319389 Earlier catalogue reference Old unit in hand, tractor serial number

25.67 cm³/rev and 3000 rpm: What the 84263360 Reference Figures Mean

Displacement and theoretical flow

Theoretical flow is displacement multiplied by drive speed. At the 3000 rpm maximum, 25.67 cm³/rev gives about 77.0 L/min. At 2000 rpm it gives about 51.3 L/min. Real output is typically lower than the theoretical figure because of internal leakage, and that loss increases with oil temperature and working pressure.

Interface details come from your sample

The two figures above are the only CNH reference data quoted here. Shaft end, flange pattern, port sizes and orientation, and direction of rotation are taken only from your original sample or approved drawing. We do not list a pressure rating or tolerances that have not been verified. The confirmed parameters are recorded in the product attribute table for each approved configuration.

Displacement 25.67 cm³/rev (CNH reference)
Maximum speed 3000 rpm (CNH reference)
Theoretical flow at 3000 rpm approx. 77.0 L/min
Shaft, flange, ports, rotation Per sample or approved drawing

Which Case IH Puma, Magnum and New Holland Tractors Use This Pump?

Catalogue listings show where the pump is used. The serial number and transmission type confirm whether it fits a particular tractor.

Case IH Puma 115 and 125

These Puma configurations are listed against the 84263360 reference. Fit is confirmed only after the tractor serial and transmission type are checked, because pump specification can differ between build periods.

Case IH Magnum 180, 190 and 210

These Magnum models appear in the same catalogue listing. Confirm the serial and transmission before quoting, because a model name alone does not cover every year or option package.

Selected New Holland tractor systems

Some New Holland hydraulic systems use this reference. We confirm each one from the serial, the transmission type and the old unit, and we do not assume fit across a whole model range.

Four Fitment Checks Before You Request a Quote

Purchasing managers and engineers each provide part of the information below.

Step 1

Check the part number

Read the reference on the pump nameplate or in the parts catalogue, whether 84263360 or one of the earlier numbers. Your purchasing manager can usually take this from the existing order history.

Step 2

Send the tractor details

Provide the tractor model, serial number and transmission type. These three details separate configurations that share a model name.

Step 3

Photograph the old unit

Your technician should send clear photos of the shaft end, the flange face, both ports and the rotation arrow. An original sample can also be sent for direct measurement.

Step 4

Share existing drawings

Engineers can submit drawings or 3D files for our review. We check every interface feature against the sample data before development is confirmed.

Developing a Custom 84263360-Pattern Gear Pump: Dedicated Tooling and Refundable Tooling Fee

Tooling and development basis

This model needs dedicated tooling. Development starts only from an original sample or a drawing that has passed our review. We confirm the one-time upfront tooling fee and qualifying quantity in writing before development begins. We refund the fee in full once your cumulative purchases of this model reach the agreed quantity. Multiple orders count toward that total.

Inspection against the confirmed drawing

Quality control is based on the drawing. Each dimension and interface feature on the confirmed drawing is checked item by item against the produced pumps, and the drawing stays the reference for every later batch. This keeps repeat orders consistent with the sample you approved.

Private label and packaging

Distributors can choose white-label supply or custom packaging with their own brand and carton marking. Packaging details are agreed together with the drawing, so labels and part references on the box match the approved configuration.

84263360 Gear Pump Questions from Distributors and OEM Buyers

What do the catalogue photos show?
The images show the CNH 84263360 reference configuration so you can compare the drive end, mounting face and ports.
Can you quote against 47135548, 87319386 or 87319389?
Yes. These earlier catalogue references can be quoted once the sample or drawing has been checked against the tractor serial and transmission type.
How is the tooling fee charged and refunded?
We confirm the one-time upfront tooling fee and qualifying quantity in writing before development begins. We refund the fee in full once your cumulative purchases of this model reach the agreed quantity. Multiple orders count toward that total.
How is distributor or bulk pricing set?
Each inquiry is quoted separately based on quantity and configuration, on EXW Hebei, China terms. Tiered pricing for larger volumes is set out in the quotation.
Can you supply private label or custom packaging?
Yes. White-label supply and custom packaging with your brand are available and are confirmed together with the approved drawing.

Request an 84263360 Gear Pump Quotation: Send Part Number, Serial and Photos

Send the part number, tractor serial, transmission type, old-unit photos or drawings, required quantity and packaging needs, and you will receive a drawing or sample review followed by an EXW Hebei quotation. Your catalogue may call this item a bomba hidráulica de engranajes, pompe hydraulique à engrenages, шестерённый гидронасос, مضخة تروس هيدروليكية or 农机液压齿轮泵. We quote against the reference number and the physical unit.

Part number, current or earlier reference

Tractor serial and transmission type

Photos of the shaft, flange, ports and rotation

Submit Your Pump Details for a Quote

Tooling & Production

To match the 84263360 pump to your application, we first review your original sample or approved drawing. This model requires dedicated tooling to reproduce the mounting interface, shaft fit and port layout.

Before development begins, we’ll confirm the one-time tooling fee and the qualifying purchase quantity with you in writing. The tooling fee is paid upfront and refunded in full once your cumulative purchases of this model reach the agreed quantity. Orders for this model can count towards the total over time, so you can plan your first order around your current needs.

Send us your original pump details and expected order quantities, and we’ll include the tooling fee, purchase threshold and refund terms in your quotation.

Catalogue and photo references

The five photos show the CNH 84263360 catalogue reference. See the CNH catalogue entry for reference specifications. The configuration and performance of the developed pump are confirmed against the approved drawing and test requirements.

Search references: bomba hidráulica de engranajes 84263360 (ES), pompe hydraulique à engrenages 84263360 (FR), шестерённый гидронасос 84263360 (RU), مضخة تروس هيدروليكية 84263360 (AR), bomba hidráulica de engrenagens 84263360 (PT), 84263360 hidrolik dişli pompa (TR), 84263360 农机液压齿轮泵 (ZH).

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.