How To Add A Hydraulic Pump To A Tractor
Learn how to add an auxiliary hydraulic pump to your tractor. Covers pump selection, installation steps, and t…
| Item | Catalogue reference and verification |
|---|---|
| Part references | 38180-36100, 38180-76100, 38180-76120. Verify the actual bolt pattern and shaft before specifying a configuration. |
| Equipment | Selected Kubota B1902 and L-series tractors. Confirm 2-bolt vs 4-bolt mounting and drive profile. 38180-76120 is an additional reference. Verify by model suffix and serial number. |
| Interface | Confirm shaft profile, mounting pilot, bolt pattern, port dimensions and rotation from the original pump or approved drawing. |
| Development | Dedicated tooling required. One-time tooling fee paid upfront and refunded in full at the agreed cumulative purchase quantity. |
| Warranty | One year. Coverage is detailed in the written quotation. |
Drawing-Matched Gear Pump
The 38180-36100 and 38180-76100 hydraulic gear pumps fit selected Kubota B1902 and L-series tractors, and each order is built to a drawing you confirm before production, not matched from a catalogue photo.
Many listings for these two Kubota numbers ship one generic unit against several tractor models. The mounting face and shaft are the points most likely to differ. A 2-bolt flange will not bolt onto a 4-bolt housing, and a mismatched drive profile will not engage the pump drive. Our process starts with that check. Your part number, mounting style and shaft details go onto a confirmation drawing, and that drawing becomes the production reference.
Production uses dedicated tooling for this model. The one-time tooling fee is refunded in full once cumulative orders reach a quantity agreed in writing. Every unit carries a one-year warranty and ships EXW from Hebei, China.
38180-36100 and 38180-76100, with 38180-76120 as an additional cross-reference.
2-bolt or 4-bolt mounting and drive profile are confirmed on a drawing before quotation.
One year, with coverage terms set out in the written agreement.
Identical part numbers can still hide two flange layouts, so fitment is confirmed against a drawing.
Olive Branch Hydraulics manufactures this hydraulic gear pump in Hebei, China, for selected Kubota B1902 and L-series tractors. The working references are 38180-36100 and 38180-76100. We also use 38180-76120 as a cross-reference when your records or the tractor's parts book list it. Kubota names and part numbers on this page are used only for identification.
Two details decide whether a pump fits a given tractor: the mounting flange (2-bolt or 4-bolt) and the drive profile of the input shaft. Neither can be confirmed reliably from a product photo. Our photos are identification references. Each configuration is matched to the drawing you sign off, and units are machined and assembled to that drawing.
Distributors who serve several language markets catalogue the same part as a bomba hidráulica de engranajes, pompe hydraulique à engrenages, шестерённый гидронасос or مضخة تروس هيدروليكية. The cross-reference stays the same in every language: part number first, then mounting and shaft.
Four inputs are enough for us to draw the configuration and quote against it.
We return a confirmation drawing with the quotation. We do not publish dimensions or flow figures until you have confirmed the drawing.
Send the number stamped on the original pump or a clear photo of its nameplate. If the plate is worn, include the number from the tractor's parts book.
State whether the flange is 2-bolt or 4-bolt, and include a straight-on photo of the mounting face. The flange layout is the most common cause of wrong-fit returns on this pump family.
Send photos or a drawing of the input shaft end. We match the profile on the confirmation drawing and do not assume it from the part number alone.
Give the exact B1902 or L-series model designation. We use it to check your references against 38180-76120 and related numbers before we issue the drawing.
This model needs its own tooling before production, and the tooling fee is refundable.
We prepare a confirmation drawing from your part number, photos or a physical sample. You check the flange, shaft and porting and sign the drawing off.
The quotation lists the unit price, the one-time tooling fee and the cumulative order quantity that triggers the refund. All three figures are fixed in writing.
You pay the tooling fee once, after accepting the quotation. The tooling is dedicated to this model and is not charged again on repeat orders.
Pre-production samples are built on the new tooling and checked against the confirmed drawing. You approve the samples before bulk production starts.
Orders of this same model count toward the agreed quantity across shipments. When the cumulative total reaches that quantity, the full tooling fee is refunded.
Every batch is built and checked against the drawing you signed off.
The signed confirmation drawing is the single reference for machining, assembly and final checks. Inspectors compare parts against the drawing, not against a previous batch or a sample photo. The flange layout and shaft profile are verified at final inspection because they decide fitment on the tractor. If you need extra test items, such as a specific pressure check or witness inspection, they are added to the written agreement before production.
Checks run at incoming material, after machining of the gear and housing, after assembly, and before packing. A part that fails at one stage is held there and does not move to the next operation. Each inspection stage is tied to the batch, so a reorder can be traced to the build it came from.
Distributors restocking the same SKU need the third shipment to bolt on exactly like the first. OEM programmes running this pump into a build line need the same consistency. Fixed tooling and a fixed drawing remove most of the variation that appears when a pump is re-sourced from changing suppliers. Olive Branch Hydraulics keeps the approved drawing on file, and every repeat order is built to it unless you request a revision in writing.
Reorders are built to the drawing you approved, not to a newer catalogue version.
Options for resale and brand programmes on this pump.
White-label units are available under your brand, with no manufacturer marking on the product.
Boxes, labels and part-number cross-reference labels are made to your artwork.
Flange, shaft and porting are built to your confirmed drawing.
Quotations are tiered by quantity. The tooling refund lowers your effective cost as cumulative orders grow.
Warranty
One year
Coverage terms as set out in the written agreement
Incoterms
EXW
Hebei, China
Payment
Per written quotation
Confirmed together with the tooling fee
Lead time
Per written quotation
Set after sample approval
Send your part number, 2-bolt or 4-bolt mounting style, photos or a drawing of the drive shaft, and your order quantity. Olive Branch Hydraulics will reply with a confirmation drawing, a written quotation and the tooling plan, including the refund quantity.
Send Part Details for a Quote
Part number or nameplate photo
Flange and shaft photos or drawing
Tractor model and quantity
This model requires dedicated tooling before production. We first review your original pump sample or approved drawing to confirm the mounting interface, drive and ports.
Before development begins, we confirm the one-time tooling fee and the qualifying purchase quantity in writing. The tooling fee is paid upfront. We refund it in full once cumulative purchases of this model reach the agreed quantity. Multiple orders for this model can count towards that total.
Olive Branch Hydraulics offers competitive pricing, consistent product quality and a one-year warranty. We quote against the confirmed specification and order quantity. Warranty coverage and the tooling refund terms are stated in the written quotation.
38180-36100, 38180-76100, 38180-76120. Verify the actual bolt pattern and shaft before specifying a configuration.
Selected Kubota B1902 and L-series tractors. Confirm 2-bolt vs 4-bolt mounting and drive profile. 38180-76120 is an additional reference. The photo shows a reference configuration for identification.
View the catalogue reference
Regional search terms: bomba hidráulica de engranajes 38180-36100 38180-76100, pompe hydraulique à engrenages 38180-36100 38180-76100, шестерённый гидронасос 38180-36100 38180-76100, مضخة تروس هيدروليكية 38180-36100 38180-76100.
Learn how to add an auxiliary hydraulic pump to your tractor. Covers pump selection, installation steps, and t…
Skip priming and your gear pump dies in seconds. Learn the 5-minute procedure that prevents scoring, cavitatio…
Discover how hydraulic gear pumps work, why they still dominate industry, and key components to watch when spe…
Compare the most trusted hydraulic gear pump brands with a data-driven ranking built for procurement teams who…
Contact us now for a professional solution and fast quote.
Fill in your info to start a conversation.