CBK200 Compact Hydraulic Gear Pumps With Standard And Enlarged Shafts

1 / 4
Item Specification
Manufacturer Olive Branch Hydraulics
Product group CBK200 / CBK-F200 compact single external gear pump
Model coverage 19 distinct catalogue model names across standard-shaft and enlarged-shaft reference tables
Displacement range 0.45–7.8 cm³/rev; see individual model rows
Pressure references Model- and shaft-execution dependent; see the two tables below
Speed reference Rated 3,000 rpm; maximum 4,000 rpm, subject to supplied execution and duty
Rotation reference Left-hand catalogue execution; confirm the arrow and drive-shaft-end viewing direction
Drive Standard and enlarged drive configurations shown; dimensions confirmed against the mating coupling
Mounting / ports Compact mounting face and end-cover connection arrangement; verify pilot, hole centres and port dimensions
Equipment fitment Auxiliary hydraulic circuits and compact hydraulic power units, subject to verified installation requirements
OEM/material number Confirmed from the original pump marking, machine reference and approved drawing
OEM/ODM Sample or drawing evaluation, shaft configuration assessment, identification and export packing
Product Information

CBK200 compact gear pumps with two drive configurations

Olive Branch Hydraulics manufactures hydraulic gear pumps and supports OEM/ODM development for agricultural, mobile and industrial auxiliary hydraulic equipment. This product page groups the reviewed CBK200 standard-shaft and enlarged-shaft executions so that the required drive and displacement can be discussed within one product family.

The four approved reference images show the standard drive, rear connection, enlarged drive and enlarged-shaft front face. Compare the complete mounting and drive dimensions with the installed pump before ordering. The term enlarged shaft identifies the catalogue option; its actual diameter and engagement dimensions must be specified on the order drawing.

Standard-shaft model references

Catalogue model Displacement cm³/rev Rated pressure MPa Maximum pressure MPa
CBK-F200.45 0.45 20 25
CBK-F200.6 0.6 20 25
CBK-F200.8 0.8 20 25
CBK-F201.1 1.1 20 25
CBK-F201.3 1.3 20 25
CBK-F201.6 1.6 20 25
CBK-F202.1 2.1 20 25
CBK-F202.6 2.6 20 25
CBK-E203.2 3.2 16 20
CBK-E203.7 3.7 16 20
CBK-E204.2 4.2 16 20
CBK-D204.8 4.8 12.5 16
CBK-D205.8 5.8 12.5 16
CBK-C206.8 6.8 10 12.5
CBK-B207.8 7.8 8 10

Enlarged-shaft model references

Catalogue model Displacement cm³/rev Rated pressure MPa Maximum pressure MPa
CBK-F203.7 3.7 20 20
CBK-F204.2 4.2 20 20
CBK-E204.8 4.8 16 16
CBK-D205.8 5.8 12.5 16
CBK-C206.8 6.8 10 12.5
CBK-C207.8 7.8 10 10

The two tables contain 21 configuration entries and 19 distinct model names. Repeated names remain listed in each shaft table so that the required execution is clear. Do not transfer the pressure rating of one shaft or pressure-letter variant to another. Maximum pressure is not a continuous-duty permission; final limits are agreed in the supplied technical specification.

Model names and search spellings

Catalogue designation Punctuation / spacing enquiry forms
CBK-F200.45 CBKF200.45; CBK F200.45
CBK-F200.6 CBKF200.6; CBK F200.6
CBK-F200.8 CBKF200.8; CBK F200.8
CBK-F201.1 CBKF201.1; CBK F201.1
CBK-F201.3 CBKF201.3; CBK F201.3
CBK-F201.6 CBKF201.6; CBK F201.6
CBK-F202.1 CBKF202.1; CBK F202.1
CBK-F202.6 CBKF202.6; CBK F202.6
CBK-E203.2 CBKE203.2; CBK E203.2
CBK-E203.7 CBKE203.7; CBK E203.7
CBK-E204.2 CBKE204.2; CBK E204.2
CBK-D204.8 CBKD204.8; CBK D204.8
CBK-D205.8 CBKD205.8; CBK D205.8
CBK-C206.8 CBKC206.8; CBK C206.8
CBK-B207.8 CBKB207.8; CBK B207.8
CBK-F203.7 CBKF203.7; CBK F203.7
CBK-F204.2 CBKF204.2; CBK F204.2
CBK-E204.8 CBKE204.8; CBK E204.8
CBK-C207.8 CBKC207.8; CBK C207.8

Series enquiries may use CBK200, CBK-200, CBK-F200, CBKF200 or CBK F200. These are family-level search forms, not complete assembly numbers. Retain decimal points, the pressure-class letter and all suffixes from the original nameplate. For example, CBK-E203.7 and CBK-F203.7 are separate rated variants rather than alternative spellings of one specification.

Chinese descriptions include CBK200齿轮泵、CBK-F200小排量液压油泵、CBK加粗轴齿轮泵、CBK标准轴齿轮泵 and 小型液压动力单元油泵. English enquiry names include CBK200 compact hydraulic gear pump, CBK-F200 small-displacement gear pump, standard-drive gear pump, enlarged-shaft gear pump and hydraulic power-pack pump.

Confirm the shaft, mounting and oil connections

Send the shaft-end shape, diameter or flat dimensions, projection, engagement length and the mating coupling measurements. Standard shaft, standard drive and 标准轴 describe the first catalogue execution. Enlarged shaft, larger drive shaft and 加粗轴 describe the second execution. Those names alone do not establish an installation size or coupling fit.

Measure the locating pilot, mounting-hole centres, flange thickness and available clearance. Identify both oil connections and provide the thread or flange dimensions. Confirm rotation using the original arrow and the correct shaft-end viewing direction. A similar external appearance does not prove that two assemblies can use the same coupling.

Equipment and operating information

Provide the machine model, full installed-pump marking, operating pressure, shaft-speed range, oil type, temperature and duty cycle with the enquiry. For agricultural auxiliary circuits or a compact hydraulic power unit, compare the flow requirement and drive connection before choosing a displacement.

Theoretical delivery in litres per minute equals displacement in cm³/rev multiplied by speed in rpm and divided by 1,000. Actual flow depends on leakage and operating conditions. Confirm the selected pump and drive requirements in the approved supply specification.

Manufacturing and quotation

For OEM/ODM projects, send an original sample or a complete drawing together with the quantity needed for each configuration. We will evaluate the housing, drive, mounting, oil connections and sealing arrangement, then agree the inspection scope, identification, production requirements and export packing.

A machine-specific OEM material number is confirmed from technical evidence for the installed assembly. Other suppliers may use different displacement codes or suffix conventions under the CBK name; a matching number alone is not proof of identical dimensions. The photographs are reference views of the approved configurations, not individual photographs of every model in the tables.

Frequently asked questions

Can standard and enlarged shafts be ordered together?

Yes. State the required model, drive dimensions and quantity for each execution within this product group.

Why does the same model appear in both tables?

A catalogue designation can be offered under different drive executions. Confirm the shaft and complete order drawing together with the model name.

Can you manufacture from an existing pump sample?

We can evaluate the sample and operating requirements for OEM/ODM development, with tooling, inspection and production arrangements agreed for the project.

International Search Terms

These multilingual product descriptions help customers identify the listed pump family. They are suggested search phrases, not measured keyword-volume data or confirmation of machine compatibility. Use the exact displacement, shaft, rotation and model suffix stated above when making an enquiry.

Market / language Product search phrases
English — international buyers CBK200 / CBK-F200 hydraulic gear pump; CBK200 / CBK-F200 gear oil pump
Russia / Kazakhstan — Russian CBK200 / CBK-F200 шестеренный насос; CBK200 / CBK-F200 гидравлический насос
Mexico / Nicaragua / Latin America — Spanish bomba hidráulica de engranajes CBK200 / CBK-F200; bomba CBK200 / CBK-F200
Egypt / Iraq / Arabic-speaking markets مضخة تروس هيدروليكية CBK200 / CBK-F200
Türkiye — Turkish CBK200 / CBK-F200 hidrolik dişli pompa; CBK200 / CBK-F200 dişli pompa
Brazil — Portuguese bomba hidráulica de engrenagens CBK200 / CBK-F200
Vietnam — Vietnamese bơm bánh răng thủy lực CBK200 / CBK-F200
Indonesia — Indonesian pompa roda gigi hidrolik CBK200 / CBK-F200
French-speaking markets pompe hydraulique à engrenages CBK200 / CBK-F200

Model Identification And OEM Material Numbers

Search family reference: CBK200 / CBK-F200. The complete verified model patterns, observed markings and configuration details are retained in the technical table and product description above. Family names, model codes and displacement codes are not independently verified equipment OEM material numbers. No additional machine OEM material number or cross-reference has been established for this specific assembly from the verified information available for this listing. Supply the original pump nameplate or equipment parts catalogue to verify an equipment number before ordering.

Do not assume interchangeability from a shared model prefix. Shaft, flange, ports, rotation, pressure grade and dimensions must correspond to the selected approved specification.

You May Also Like

Related Articles

Send Your Inquiry Today

Contact us now for a professional solution and fast quote.