Máy bơm bánh răng thủy lực là gì? Hướng dẫn đơn giản cho chuyên gia ngành
Tìm hiểu cách máy bơm bánh răng thủy lực hoạt động, lý do chúng vẫn chiếm ưu thế trong ngành, và các thành phầ…
| Parameter | Specification |
|---|---|
| OEM Part Number | 67120-26650-71 (alias 671202665071) |
| Reference Applications | Toyota 8FG20/23/25, 8FD20/23/25/30 |
| Pump Type | External hydraulic gear pump, replacement |
| Fitment Verification | Truck serial number plus full pump assembly code |
| Interface Checks | Rotation, shaft spline, pilot, hole pitch, P/T ports |
| Final Inspection | 100% inspected before packaging |
| MOQ | 1 piece for stocked models |
| Lead Time | Stocked models ship within 3–5 business days |
| Trade Term and Warranty | EXW Hebei, China; one-year warranty |
| Part references | 67120-26650-71 / 67110-N3070-71 |
|---|---|
| Displacement | 28.2 cm³/rev |
| Drive shaft | 10-tooth SAE spline, Ø17.04 mm major diameter |
| Rotation | Clockwise per Hydro-Pack catalogue |
| Inlet / outlet | 1-5/16-12 UNF-2B / 7/8-14 UNF-2B |
| Application reference | Selected Toyota 8FG20–30 / 4Y and 8FD20–30 / 1DZ |
Match the full assembly number and confirm rotation, mounting dimensions, pressure and speed with the original pump or drawing.
The 67120-26650-71 forklift hydraulic gear pump is a replacement pump referenced for Toyota 8FG20/23/25 and 8FD20/23/25/30 trucks. Each pump is matched to your truck serial number and full assembly code before it is quoted or shipped.
Start with the full code. The 67120-26650 base number and the -71 suffix are read together, and the code is also written without hyphens as 671202665071 in parts catalogues and distributor price lists. Two pumps can share a truck model designation and still differ at the shaft, the mounting flange or the port faces. For that reason, the truck model alone is never used to confirm a match.
On Toyota 8-series internal-combustion trucks, the main hydraulic gear pump typically supplies the lift, tilt and power steering circuits. If the pump is mismatched, the problems usually appear at installation: a spline that will not engage, bolt holes that do not line up, or reversed rotation. Every interface listed below is checked against your truck data before production or dispatch.
The reference fitment is the 8FG20/23/25 LPG/gasoline series and the 8FD20/23/25/30 diesel series. The truck serial number decides the match.
Published cross-references list 67120-26650-71 for the Toyota 8FG20, 8FG23 and 8FG25 and for the 8FD20, 8FD23, 8FD25 and 8FD30. These listings tell you which pump to look up. They do not confirm a fit. Within one truck series, the pump can change with production period, engine option, mast type or attachment hydraulics. Toyota records these changes by serial range, not by model name.
Send the truck serial number from the data plate, the complete pump assembly code from the old pump, and photos of the shaft end, the mounting flange and both port faces. We check this data against the 67120-26650-71 reference. If any item conflicts, such as a different suffix, an extra pump section or a port arrangement that does not fit the listing, we report it before quoting.
Brand names and part numbers are used for replacement identification only. Compatibility depends on the complete assembly code.
Identification data for this part number is fixed. Performance and interface values are verified against the original assembly or an approved drawing, and are not copied from a general catalogue.
| Item | Status | How it is confirmed |
|---|---|---|
| OEM part number | Confirmed: 67120-26650-71 | Matched to the code on your old pump |
| Alias format | Confirmed: 671202665071 | Same part, written without hyphens |
| Reference trucks | 8FG20/23/25, 8FD20/23/25/30 | Checked against the truck serial number |
| Displacement (cc/rev) | Gate 2: performance | Measured from the original assembly or OEM drawing |
| Rated pressure | Gate 2: performance | Matched to the truck's relief valve setting |
| Speed (rpm) | Gate 2: performance | Checked against the engine drive ratio |
| Rotation direction | Gate 2: performance | Confirmed from the shaft end before machining |
| Shaft spline and dimensions | Gate 3: interface | Tooth count, OD and length checked against the sample |
| Pilot diameter | Gate 3: interface | Measured at the flange register |
| Mounting hole pitch | Gate 3: interface | Bolt centres checked against the drawing |
| P/T ports | Gate 3: interface | Thread type, size and face position verified |
Have the serial number but not the pump code?Send the truck data plate photo and a picture of the old pump. We trace the assembly and tell you which data is still missing.
Most fit failures on replacement forklift pumps come from four mismatches. Each one is caught at a different stage.
External gear pumps are built for one direction of rotation. Inlet and outlet positions, and often internal seal placement, follow that direction. A pump with reversed rotation fits the flange but does not prime correctly and can fail quickly. Rotation is confirmed from the drive end of the original pump, viewed at the shaft, before any parts are released for assembly.
The spline must match the drive coupling in tooth count, diameter and engagement length. The pilot diameter must seat in the housing register without forcing. A spline that is close but wrong usually fits loosely or wears early on the coupling. Both are measured against your sample or drawing, not estimated from photos alone.
Bolt-centre spacing and flange shape set where the pump sits relative to the drive. A deviation of a few millimetres can block installation entirely. Hole pitch is checked in the same step as the pilot, so the mounting interface is approved as one unit.
Port thread standard, size and face position decide whether the existing hoses reconnect without adapters. Distributors with a standard hose stock can request a custom P/T port configuration. That variant is then given its own approved drawing.
Displacement and rated pressure confirm performance. Spline, pilot, hole pitch and ports confirm that the pump installs, and both groups are signed off before production.
Custom work is built to drawings you approve. Inspection is based on the same drawing.
Port threads and positions can be changed to suit the hose fittings distributors already stock. Each variant has its own drawing.
Pumps are built to customer specifications for OEM or aftermarket supply. Section order, port positions and mounting interfaces are verified against the approved drawing.
Drafts and 3D renders are sent for approval before sampling, so interface errors are corrected on the drawing and not on the part.
If a new model requires tooling, the fee is refunded in full once cumulative purchases of that model reach the agreed quantity. Quantities from separate orders count toward the total.
You send the code, truck data and required changes.
Drafts and 3D renders are prepared for your approval.
A sample is built to the approved drawing for fit testing on your truck.
Batch production runs with in-process quality control. Any deviation from the drawing is resolved before the batch ships.
Every pump is inspected before packaging and then released for shipment.
All commercial terms are confirmed in a written quotation. The quotation states unit pricing by quantity, the tooling fee, the refund quantity, warranty terms and EXW terms.
| MOQ | 1 piece for stocked models · The MOQ for custom or OEM orders varies by configuration and is stated in the quotation |
|---|---|
| Lead time | Stocked models: 3–5 business days · For custom orders, lead time for each stage is set by configuration and quantity and confirmed in writing |
| Incoterms | EXW Hebei, China · Goods are handed over at the manufacturing facility |
| Payment | Stated in the written quotation · Confirmed before production starts |
| Warranty | One year · Coverage terms are written into the quotation |
| Volume pricing | Tiered by quantity · Distributors receive unit prices for each quantity break |
Send the truck serial number, the full pump code, the quantity and your destination port. You will receive a written quotation within 24 hours, along with a list of any interface items that still need confirmation.
Tìm hiểu cách máy bơm bánh răng thủy lực hoạt động, lý do chúng vẫn chiếm ưu thế trong ngành, và các thành phầ…
Bỏ qua bước mồi và bơm bánh răng của bạn sẽ hỏng trong vài giây. Tìm hiểu quy trình 5 phút để ngăn chặn trầy x…
So sánh các thương hiệu bơm bánh răng thủy lực đáng tin cậy nhất với bảng xếp hạng dựa trên dữ liệu, dành cho…
Hướng dẫn dành cho kỹ sư về cách lựa chọn bơm bánh răng thủy lực cho ứng dụng cần cẩu: áp suất, dung tích, MTB…
Liên hệ với chúng tôi ngay hôm nay để nhận giải pháp chuyên nghiệp và báo giá nhanh chóng.
Fill in your info to start a conversation.