67120-26650-71 Toyota Forklift Hydraulic Gear Pump

1 / 4
Parameter Specification
OEM Part Number 67120-26650-71 (alias 671202665071)
Reference Applications Toyota 8FG20/23/25, 8FD20/23/25/30
Pump Type External hydraulic gear pump, replacement
Fitment Verification Truck serial number plus full pump assembly code
Interface Checks Rotation, shaft spline, pilot, hole pitch, P/T ports
Final Inspection 100% inspected before packaging
MOQ 1 piece for stocked models
Lead Time Stocked models ship within 3–5 business days
Trade Term and Warranty EXW Hebei, China; one-year warranty

Hydro-Pack 25C28.2X808 reference configuration

Part references 67120-26650-71 / 67110-N3070-71
Displacement 28.2 cm³/rev
Drive shaft 10-tooth SAE spline, Ø17.04 mm major diameter
Rotation Clockwise per Hydro-Pack catalogue
Inlet / outlet 1-5/16-12 UNF-2B / 7/8-14 UNF-2B
Application reference Selected Toyota 8FG20–30 / 4Y and 8FD20–30 / 1DZ

Match the full assembly number and confirm rotation, mounting dimensions, pressure and speed with the original pump or drawing.

поделиться вFacebookXLinkedInPinterestWhatsApp
Информация о продукции

67120-26650-71 Toyota Forklift Hydraulic Gear Pump

The 67120-26650-71 forklift hydraulic gear pump is a replacement pump referenced for Toyota 8FG20/23/25 and 8FD20/23/25/30 trucks. Each pump is matched to your truck serial number and full assembly code before it is quoted or shipped.

Start with the full code. The 67120-26650 base number and the -71 suffix are read together, and the code is also written without hyphens as 671202665071 in parts catalogues and distributor price lists. Two pumps can share a truck model designation and still differ at the shaft, the mounting flange or the port faces. For that reason, the truck model alone is never used to confirm a match.

On Toyota 8-series internal-combustion trucks, the main hydraulic gear pump typically supplies the lift, tilt and power steering circuits. If the pump is mismatched, the problems usually appear at installation: a spline that will not engage, bolt holes that do not line up, or reversed rotation. Every interface listed below is checked against your truck data before production or dispatch.

Which Toyota Forklifts Use the 67120-26650-71 Hydraulic Pump?

The reference fitment is the 8FG20/23/25 LPG/gasoline series and the 8FD20/23/25/30 diesel series. The truck serial number decides the match.

Reference applications

Published cross-references list 67120-26650-71 for the Toyota 8FG20, 8FG23 and 8FG25 and for the 8FD20, 8FD23, 8FD25 and 8FD30. These listings tell you which pump to look up. They do not confirm a fit. Within one truck series, the pump can change with production period, engine option, mast type or attachment hydraulics. Toyota records these changes by serial range, not by model name.

What we need to confirm the match

Send the truck serial number from the data plate, the complete pump assembly code from the old pump, and photos of the shaft end, the mounting flange and both port faces. We check this data against the 67120-26650-71 reference. If any item conflicts, such as a different suffix, an extra pump section or a port arrangement that does not fit the listing, we report it before quoting.

Brand names and part numbers are used for replacement identification only. Compatibility depends on the complete assembly code.

Supply this with your RFQ

  • Truck model and full serial number
  • Complete pump code, including the -71 suffix
  • Photos of the shaft spline, flange and P/T ports

Not enough to confirm a match

  • Truck model name only
  • Base number 67120-26650 without a suffix
  • Photos of the pump body with no visible markings

67120-26650-71 Specifications and Verification Gates

Identification data for this part number is fixed. Performance and interface values are verified against the original assembly or an approved drawing, and are not copied from a general catalogue.

Item Status How it is confirmed
OEM part number Confirmed: 67120-26650-71 Matched to the code on your old pump
Alias format Confirmed: 671202665071 Same part, written without hyphens
Reference trucks 8FG20/23/25, 8FD20/23/25/30 Checked against the truck serial number
Displacement (cc/rev) Gate 2: performance Measured from the original assembly or OEM drawing
Rated pressure Gate 2: performance Matched to the truck's relief valve setting
Speed (rpm) Gate 2: performance Checked against the engine drive ratio
Rotation direction Gate 2: performance Confirmed from the shaft end before machining
Shaft spline and dimensions Gate 3: interface Tooth count, OD and length checked against the sample
Pilot diameter Gate 3: interface Measured at the flange register
Mounting hole pitch Gate 3: interface Bolt centres checked against the drawing
P/T ports Gate 3: interface Thread type, size and face position verified

Have the serial number but not the pump code?Send the truck data plate photo and a picture of the old pump. We trace the assembly and tell you which data is still missing.

Check My Truck Serial

Choosing a Replacement Forklift Hydraulic Gear Pump: Four Checks That Decide Fit

Most fit failures on replacement forklift pumps come from four mismatches. Each one is caught at a different stage.

Rotation direction

External gear pumps are built for one direction of rotation. Inlet and outlet positions, and often internal seal placement, follow that direction. A pump with reversed rotation fits the flange but does not prime correctly and can fail quickly. Rotation is confirmed from the drive end of the original pump, viewed at the shaft, before any parts are released for assembly.

Shaft spline and pilot

The spline must match the drive coupling in tooth count, diameter and engagement length. The pilot diameter must seat in the housing register without forcing. A spline that is close but wrong usually fits loosely or wears early on the coupling. Both are measured against your sample or drawing, not estimated from photos alone.

Hole pitch and flange pattern

Bolt-centre spacing and flange shape set where the pump sits relative to the drive. A deviation of a few millimetres can block installation entirely. Hole pitch is checked in the same step as the pilot, so the mounting interface is approved as one unit.

P/T ports

Port thread standard, size and face position decide whether the existing hoses reconnect without adapters. Distributors with a standard hose stock can request a custom P/T port configuration. That variant is then given its own approved drawing.

Displacement and rated pressure confirm performance. Spline, pilot, hole pitch and ports confirm that the pump installs, and both groups are signed off before production.

Custom and OEM Forklift Gear Pump Orders

Custom work is built to drawings you approve. Inspection is based on the same drawing.

  • Custom P/T port configurations

    Port threads and positions can be changed to suit the hose fittings distributors already stock. Each variant has its own drawing.

  • Made-to-specification pumps

    Pumps are built to customer specifications for OEM or aftermarket supply. Section order, port positions and mounting interfaces are verified against the approved drawing.

  • Design drafts and 3D renders

    Drafts and 3D renders are sent for approval before sampling, so interface errors are corrected on the drawing and not on the part.

  • Tooling fee refund

    If a new model requires tooling, the fee is refunded in full once cumulative purchases of that model reach the agreed quantity. Quantities from separate orders count toward the total.

How custom orders work

  1. 01

    Inquiry

    You send the code, truck data and required changes.

  2. 02

    Design

    Drafts and 3D renders are prepared for your approval.

  3. 03

    Sampling

    A sample is built to the approved drawing for fit testing on your truck.

  4. 04

    Production

    Batch production runs with in-process quality control. Any deviation from the drawing is resolved before the batch ships.

  5. 05

    Final inspection and shipping

    Every pump is inspected before packaging and then released for shipment.

MOQ, Lead Time and Trade Terms

All commercial terms are confirmed in a written quotation. The quotation states unit pricing by quantity, the tooling fee, the refund quantity, warranty terms and EXW terms.

MOQ 1 piece for stocked models · The MOQ for custom or OEM orders varies by configuration and is stated in the quotation
Lead time Stocked models: 3–5 business days · For custom orders, lead time for each stage is set by configuration and quantity and confirmed in writing
Incoterms EXW Hebei, China · Goods are handed over at the manufacturing facility
Payment Stated in the written quotation · Confirmed before production starts
Warranty One year · Coverage terms are written into the quotation
Volume pricing Tiered by quantity · Distributors receive unit prices for each quantity break

67120-26650-71 Pump FAQ

Is this a genuine Toyota part?
No. It is a replacement pump, and the Toyota name and part number are used only to identify the application. Fitment is confirmed through your serial number and the complete assembly code.
Will 67120-26650-71 fit a Toyota 7FG or 7FD truck?
Only if the serial number and pump code confirm it. The cross-reference covers 8FG20/23/25 and 8FD20/23/25/30. Other series are checked one case at a time from your data, and no fit is assumed.
What inspection is done on each pump?
Every pump receives a final inspection before packaging. Dimensional checks, leak inspection and pressure/flow testing, where applicable, are agreed in the quotation together with any documents you need.
Can you match a pump if the code plate is worn off?
Often yes, using the truck serial number plus measurements and photos of the shaft, flange and ports. If the data still leaves a gap, we ask for the old pump or a drawing before quoting.
Are third-party certificates or test reports included?
Only documents agreed in the quotation are supplied. Any third-party document reference belongs to its holder and is not a certification of the pump maker.

Get a Matched Quote for 67120-26650-71

Send the truck serial number, the full pump code, the quantity and your destination port. You will receive a written quotation within 24 hours, along with a list of any interface items that still need confirmation.

  • The serial number and pump code are enough to start
  • Photos of the shaft, flange and ports speed up verification
  • Distributors can request quantity-break pricing

Request a QuoteEmail [email protected]

Вам также может понравиться

Похожие статьи

Отправьте ваш запрос сегодня

Свяжитесь с нами прямо сейчас для получения профессионального решения и быстрого расчёта стоимости.