O que é uma Bomba Hidráulica de Engrenagem? Um Guia em Linguagem Simples para Profissionais da Indústria
Descubra como funcionam as bombas hidráulicas de engrenagem, por que ainda dominam a indústria e os componente…
| Parameter | Specification |
|---|---|
| Pump type | External gear pump, aftermarket replacement |
| Reference code | 69101-GG00A (identification only) |
| Compatibility basis | Complete assembly code, forklift model, equipment details |
| Interfaces matched | Mounting flange, shaft end, rotation, P/T ports |
| Customization | Custom P/T port configurations, OEM drawings |
| Inspection | 100% final inspection before packaging |
| MOQ (stocked models) | 1 piece |
| Lead time (stocked models) | 3–5 business days |
| Warranty | One year, terms in written quotation |
| Incoterms | EXW Hebei, China |
Two meshing gears turn inside a close-fitting housing, driven from the engine. On the inlet side the teeth separate, the trapped volume expands and oil is drawn from the tank. Oil then travels in the tooth spaces around the housing wall to the outlet. There the re-meshing teeth push it into the pressure line that feeds the lift and tilt cylinders through the control valve. Displacement per revolution is fixed, so flow follows engine speed. This is why lift speed rises as the operator increases throttle.
Volumetric efficiency depends on two gaps: between the gear tips and the housing, and between the gear faces and the side plates or bushings. Many forklift gear pumps use pressure-balanced plates that load against the gear faces as outlet pressure rises, which limits axial leakage under load. Scored housings, worn bushings or a hardened shaft seal let oil slip back to suction. The result is a pump that lifts normally when empty and slows with a full pallet, especially with hot oil at low engine speed. A replacement with different bushing design or housing clearances will behave differently in exactly those conditions.
Matching the displacement is not enough if the interfaces differ. The flange pilot diameter and bolt pattern locate the pump on the drive housing. The shaft form, whether splined or keyed, must engage the existing drive coupling. Rotation direction determines which port is suction, and a pump run in the wrong direction quickly starves and damages its seals. Port position and thread standard (BSP, metric or SAE O-ring boss are common on forklift pumps) decide whether the original hoses connect directly. If they do not match, you face adapters, rerouted lines and an added leak point.
Send us the original code 69101-GG00A, the forklift model and the equipment details, such as engine type and mast configuration. We check these against the complete assembly code and confirm flange, shaft, rotation and P/T ports before quoting. The Nissan name and 69101-GG00A are used for replacement identification only. This is an aftermarket pump, not a Nissan-supplied part, and compatibility is determined by the complete assembly code rather than the reference number alone.
Confirm the complete assembly code and all four interfaces before ordering. The reference number alone does not confirm fit.
These are the details we need to confirm a matched replacement.
69101-GG00A identifies the application. The complete assembly code on the pump label or body separates variants. If the plate is unreadable, send clear photos of the pump body and both ports instead.
Include the truck model, engine type, mast configuration and approximate build year. These details narrow down variants that share the same reference number.
We need the flange type, bolt pattern, pilot diameter and spline or key details. If the documentation is incomplete, caliper measurements taken from the old pump are accepted.
Specify the P/T port positions, thread standard and size, and the rotation as viewed from the shaft end. Distributor-specific port layouts are fixed on the approved drawing.
Displacement, pressure and flow are confirmed on the sample or the approved drawing, not taken from a general catalogue. For this reason, no figures are listed here.
Service shops need a pump that fits the first time, so the truck goes back into service within one visit.
Shift operators need lift speed under load to return to normal, so racking work is not slowed.
Fleet managers need short dispatch times, so trucks are not parked during peak periods.
Distributors need consistent interfaces across batches and predictable restocking.
Plant maintenance teams need a direct swap without modifying hoses or brackets on internal transport trucks.
OEM and aftermarket custom orders, including distributor-specific P/T port configurations, follow six steps.
Production runs at our manufacturing partner in Ningjin, established in August 2010 and about 9 km from the Xinji sales office.
You send the code, forklift model, port requirements and quantity. We confirm the complete assembly code and the interface data.
We prepare drawings and renders showing section order, port positions and mounting interfaces. You review these before any sample is made.
Samples are built only after you approve the drawing. That drawing becomes the inspection reference for every later batch.
Parts are checked during machining and assembly against the approved drawing, not against a general catalogue specification.
Every pump is inspected before packaging. Any deviation from the drawing is resolved before the batch ships, not after it arrives.
Ports are sealed, units are packed and the goods are handed over for shipment to your destination port.
The MOQ is 1 piece and orders ship within 3–5 business days. This suits urgent repairs and trial orders before a distributor commits to stock.
MOQ and lead time depend on the configuration and the order quantity. Each stage, from drawing approval through to repeat production, has its lead time confirmed in the written quotation.
If tooling is required, the fee is refunded in full once your cumulative purchases of that model reach the agreed quantity. Multiple orders count toward that total.
The quotation lists unit prices by quantity, the tooling fee, the refund quantity, warranty terms and EXW Hebei, China delivery. Payment terms are also confirmed in writing.
Send us the code 69101-GG00A, your forklift model and equipment details, the quantity and your destination port. You will receive a matching confirmation and a written quotation within 24 hours. Email [email protected] or call +8615075996564.
Descubra como funcionam as bombas hidráulicas de engrenagem, por que ainda dominam a indústria e os componente…
Ignorar a preparação e sua bomba de engrenagem falha em segundos. Aprenda o procedimento de 5 minutos que evit…
Compare as marcas de bombas de engrenagens hidráulicas mais confiáveis com uma classificação baseada em dados,…
Guia do engenheiro para selecionar uma bomba de engrenagens hidráulica para uso em guindastes: pressão, desloc…
Entre em contato agora para obter uma solução profissional e um orçamento rápido.
Fill in your info to start a conversation.