SGP Cast Iron Hydraulic Gear Pump 23–36 Cc/Rev

1 / 4
Parameter Specification
Pump type / housing External gear pump, cast iron body
Displacement 23–36 cm³/rev (1.40–2.20 in³/rev), 8 sizes
Pressure 200 bar (2,900 psi) continuous; 250 bar (3,625 psi) intermittent
Speed range 600–3000 rpm at catalogue conditions
Fluid temperature –15 to 80 °C (5 to 176 °F)
Fluid viscosity 20–100 mm²/s (cSt)
Shaft, rotation, flange, ports Defined by complete assembly code
Incoterms EXW Hebei, China
Warranty One year
Packaging Typically individual carton, plugged ports, palletised export cartons

Image notes: The first image is an Olive Branch Hydraulics nameplate mockup. The other images are catalogue reference drawings. Confirm the drawing revision and dimensions for your specific pump before ordering.

معلومات المنتج

SGP Cast Iron Hydraulic Gear Pump 23–36 cc/rev

The SGP cast iron hydraulic gear pump covers eight displacements from 23 to 36 cm³/rev. It is rated 200 bar continuous and 250 bar intermittent, at 600–3000 rpm under catalogue conditions.

A loader or tractor working circuit cycles up to relief pressure many times an hour, and the oil in the tank can climb past 70 °C on a summer shift. Under that duty, the housing has to hold its shape. If it deflects, gear-to-body clearance opens, volumetric efficiency falls and cylinder speed drifts. This external gear pump uses a cast iron body for that kind of continuous-pressure service, in a compact frame whose length runs from 117 mm to 133 mm across the range.

Every size shares the same pressure, speed and fluid limits, so you choose displacement by the flow your circuit needs. Shaft, rotation, mounting flange and port type are not fixed by the series. They are set by the complete assembly code. That code is what we quote and build against, whether you are replacing a worn pump or specifying a new OEM installation.

Request a quotation by assembly code

How the Cast Iron Gear Pump Handles 200 Bar Continuous Duty

Pressure rating, body material and internal leakage are linked, and the catalogue limits reflect that link.

Cast iron housing and pressure stability

An external gear pump seals by tight radial clearance between the gear tips and the body bore, and by axial clearance at the gear faces. When pressure rises, the housing is loaded from the outlet side. Cast iron has higher stiffness and better damping than the aluminium bodies common in lighter-duty pumps, so the bore deflects less at 200 bar. That is the basis for the continuous rating. Cast iron also adds weight, which is the trade-off for mobile equipment where every kilogram is counted.

Continuous versus intermittent pressure

The 200 bar continuous figure is the pressure the pump can hold for sustained operation. The 250 bar intermittent figure covers short peaks, such as a cylinder reaching end of stroke before the relief valve opens. If your circuit sits near 250 bar for long periods, it is outside the catalogue duty, and the relief setting should be reviewed. Bearing and gear-face loading rise with pressure, so a relief valve set at or below 200 bar for normal working pressure is the usual practice for long service life.

Speed range and filling

The rated speed window is 600–3000 rpm. Below roughly 600 rpm, internal leakage becomes a large share of output, and flow at low engine idle can be lower than expected. Near the top of the range, the inlet must fill the gear spaces completely. A short, generously sized suction line and oil kept inside the 20–100 mm²/s viscosity window are typically what prevents cavitation noise and erosion at 3000 rpm.

Rate the pump on the working pressure your relief valve actually holds, not on the intermittent peak.

SGP Gear Pump Displacements and Dimension L

All eight catalogue sizes, with L taken from the catalogue drawing; theoretical flow is calculated as displacement × speed ÷ 1000, before volumetric losses.

Displacement (cm³/rev) in³/rev Dimension L, mm (in) Theoretical flow at 1500 rpm, L/min (US gpm)
23 1.40 117 (4.61) 34.5 (9.1)
25 1.53 120 (4.72) 37.5 (9.9)
26.5 1.62 122 (4.80) 39.8 (10.5)
28.2 1.72 124 (4.88) 42.3 (11.2)
30 1.83 126 (4.96) 45.0 (11.9)
32 1.95 128 (5.04) 48.0 (12.7)
34 2.07 130.5 (5.14) 51.0 (13.5)
36 2.20 133 (5.24) 54.0 (14.3)
Selection guide

How to Select the Right 23–36 cc Hydraulic Gear Pump

Four inputs decide the order: flow, pressure duty, fluid conditions and the assembly code.

In this guide

  1. Displacement from required flow
  2. Input power at working pressure
  3. Fluid temperature and viscosity
  4. Assembly code items

01

Displacement from required flow

Start with the flow your actuators need at normal drive speed, then divide by speed and by volumetric efficiency. External gear pumps typically deliver 90–95% of theoretical flow at rated conditions. A circuit that needs 45 L/min at 1500 rpm therefore usually points to the 32 cm³/rev size rather than 30. Remember that L grows by only 16 mm from the smallest to the largest size, so stepping up one displacement rarely changes the installation envelope.

02

Input power at working pressure

Check that the prime mover can drive the size you pick. Hydraulic power in kW is approximately pressure in bar × flow in L/min ÷ 600. At 200 bar and 54 L/min, that is about 18 kW of hydraulic output. With overall efficiency typically around 85%, input power is close to 21 kW (about 28 hp). A smaller displacement is the simpler fix when engine or motor power is the limit.

03

Fluid temperature and viscosity

The catalogue limits are –15 to 80 °C (5 to 176 °F) and 20 to 100 mm²/s viscosity. Cold starts with thick oil starve the inlet, and hot thin oil increases slip and wear. Confirm the oil grade against both ends of your ambient range. Standard mineral hydraulic oils are the usual basis for these figures, so other fluid types should be stated at enquiry.

04

Assembly code items

Shaft type (keyed, splined or tapered), rotation direction, mounting flange and port type are all defined by the assembly code. These are the items that decide whether a pump bolts on and runs. Specify rotation as viewed from the shaft end, and give port threads or flange standards in full.

Replacing an existing pump and unsure of the code?Send the original product code, machine model and equipment details, and we match the configuration before quoting; brand names and model numbers serve identification only, and fit depends on the complete assembly code.

Send pump details

OEM Gear Pumps and Custom Port Configurations

Distributors can order custom variants, and so can equipment builders and aftermarket brands.

Configurations that need dedicated tooling start with a review of your original pump sample or approved drawing, which confirms the mounting interface, drive and ports before any tooling is made.

Custom P/T port configurations

Pressure and tank port positions and connection types can be set to suit a distributor's stocking range. Port changes are checked against the approved drawing at inspection.

Shaft, flange and rotation

Drive shaft and mounting flange are built to customer specification for OEM and aftermarket use. Changing the drive end usually requires dedicated tooling.

Drawings for approval

Design drafts and 3D renders are provided for your sign-off before sampling. The approved drawing then becomes the basis for quality checks, rather than a general catalogue sheet.

How custom orders work

  1. Inquiry

    Send the assembly code, drawing or sample with expected order quantity.

  2. Design

    Drafts and 3D renders are issued for your approval.

  3. Sampling

    Samples are built to the approved drawing for your fit and function test.

  4. Production

    Batches run with in-process quality control. Each pump passes final inspection before packaging.

  5. Shipping

    Packed goods are handed over at the Hebei facility for your forwarder.

MOQ, Lead Time, Pricing and Warranty Terms

All commercial terms are fixed in one written quotation before tooling or production begins.

MOQ and lead time

Stated in the written quotation

Based on confirmed configuration and order quantity; each stage's lead time is listed.

Pricing

Unit price by quantity tier

Tiered pricing suits distributors planning stock levels.

Tooling fee

Fully refundable

Refunded once cumulative purchases of that model reach the agreed quantity; multiple orders count toward the total.

Incoterms

EXW Hebei, China

Handed over at the manufacturer's facility; payment terms confirmed in the quotation.

Warranty

One year

Warranty terms are written into the quotation.

Packaging

Typically individual carton with port plugs

Export cartons palletised; required documents and test items agreed in the quotation.

Cast Iron Gear Pump FAQ

Is this pump bidirectional?

No. Each pump is built for one rotation direction, set by the assembly code. State clockwise or counter-clockwise as viewed from the shaft end when you order. Reversing a single-direction gear pump typically damages the shaft seal.

Can the pump run outside 600–3000 rpm or above 80 °C?

Those conditions are outside the catalogue ratings, and performance is not stated for them. If your duty cycle approaches these limits, send the speed, pressure and oil temperature profile with your enquiry so the configuration can be reviewed.

What inspection is done before shipment?

Every pump receives a final inspection before packaging. Dimensional checks, leak inspection and pressure/flow testing where applicable are agreed item by item in the quotation, together with the documents you need.

Will the pump bolt onto my existing machine?

That depends on the complete assembly code, not on the displacement alone. Flange, shaft and ports must all match, which is why we confirm them from your original code, drawing or sample before quoting.

Get a Quotation for Your Gear Pump Order

Send the assembly code or drawing, the displacement you need, your first-order quantity or annual volume and the destination port. You will receive a written quotation within 24 hours, with tiered pricing and stage-by-stage lead times.

  • Assembly code, drawing or original product code
  • Quantity per order or per year
  • Destination port

Request a quotationEmail [email protected]

قد يعجبك أيضاً

مقالات ذات صلة

أرسل استفسارك اليوم

تواصل معنا الآن للحصول على حل احترافي وعرض سعر سريع.